• 한국의류학회지
• /
• 제46권3호
• /
• pp.454-463
• /
• 2022

This study aims to provide basic size data for the development of a hip dislocation prevention garment for cerebral palsy (CP) children and useful information for the design of garment products for CP children through identifying differences in body shape between CP and non-CP children and reviewing the tibial-stature prediction formulas of previous studies. Forty-seven Korean children with CP aged 2 to 14 years were measured for body size from October 2019 to August 2020. Body measurements of 18 sites, including greater trochanter length, which is an important site for a hip dislocation prevention garment, were collected and analyzed. Data of non-CP children were taken from same age of Size Korea and compared. Tibial-stature prediction formulas suggested in four previous studies were also reviewed. CP children had significantly lower stature as well as circumferential dimensions when compared to non-CP children. Greater trochanter length is difficult to predict through other body dimensions. Thus, direct measurement is required. Of the general key dimensions used in the clothing industry, only hip circumference could explain the body shape of CP children. Tibial-stature prediction formulas cannot always but tend to largely predict the actual stature of CP children.

• 복식문화연구
• /
• 제16권2호
• /
• pp.219-234
• /
• 2008

The purpose of this thesis is to conduct research on the degree of satisfaction (for both wearing and functioning) of cycle wear; to present the basic data to develop cycle wears which can lesson the trouble for human body and have an excellent feeling in wearing. To inquire the degree of satisfaction, the method of questionnaire was used for 100 peoples consisted of male cycling players. As the result of the satisfaction degree in wearing, it can be certain that the users are satisfied overall and yet they express the lowest satisfaction at material among material, design, color and function. When it comes to unsatisfactory factors of wearing cycle wear, the most unsatisfactory one is the poor function of clothing on the whole. As the result of the site suitability of cycle wear, we can find the problems on the girth of neck and armhole of the upper garment, and on the part from waist to hip length and the girth from thigh through knee to calf of lower garment. As the result of the motion suitability of cycle wears, we can acknowledge that there are problems on the part of neck, armpit, and abdomen of the upper garment rather than the lower one.

• 한국의상디자인학회지
• /
• 제17권2호
• /
• pp.63-78
• /
• 2015

The purpose of this study is to compare the style of clothing by type of the Goguryeo and Xianbei Tribe based on the examination of the literature centered on the historical relationship between Goguryeo and Xianbei Tribe. The research results are as follows. First, it was found that both the apparels of Goguryeo and Xianbei Tribe had hemp cloth with the V-neckline with the blocked front part and hemp cloth with the open front that is worn by overlapping the straight collars of the upper garment. Both men and women wore the garment of the straight line collar that is worn by folding towards the left or right, or upper garment of the round shaped collar. Women wore an upper garment with short sleeves on top of the upper garment of Korean traditional clothes while men wore pants for the lower garment, and women wore skirt and apron with triangular cloth decoration on top of the skirt. Second, Goguryeo Anak Tomb No. 3 mural painting(year 357) shows that apparel worn by the lady who is the wife of the owner of the tomb is similar to the apparel worn by the lady in the lacquer painting for folding screen of the Sima Jinlong Tomb ancient painting on the woman of chaste reputation in terms of the form and structure.

• 복식문화연구
• /
• 제11권5호
• /
• pp.671-682
• /
• 2003

The purpose of this study is to analyze styles of costume and understand meanings related to costume embodied in the images of Buddha in Baekche period. Visual and textual analysis of the paintings include the images of Buddha in Baekche period was used for the research. The results of this study were summarized as fellows; Budah's hair style is identified as simple, Gae. Buddha wears Sanghati(outer wear) made of Tongeun and Peundanwoogeun, and many cases Sanghati made of Tongeun are usually seen. Three kinds of upper garment were identified; Samkaksika, right and left crossed upper garment, and Peunsam. Samkaksika was frequently seen in the paintings. Lower garment was a Nirasana reach to the ankle, was worn with a belt. Two skirts were also seen occasionally. The symbolic meaning of costume of Buddha was related to its religious meaning and identified as majesty and saintliest, which is harmonized with her simple costume styles. The wrapped style of costume, which did not show the contour of the buddha's body adds mystery. Also, the styles of costume created by different wrapping methods signify originality.

• 한국의류산업학회지
• /
• 제18권6호
• /
• pp.878-888
• /
• 2016

In this study, wool/nylon(50/50%) blend yarn and its fabrics for tra-biz(complex word of travel+business) garment were prepared, and its wear comfort characteristics were investigated through thermal manikin and human-body wearing experiment. In addition, tactile wearing performance from fabric mechanical properties and the dimensional stability and the pilling of the fabric specimen during wearing and dry-cleaning were measured and compared with those of wool 100% fabric specimen. Heat keepability of the wool/nylon(50/50%) blend fabric by thermal manikin experiment was superior than that of wool 100% fabric, this result was verified with human-body wearing experiment and its result coincided well with this experimental result. Tactile wearing performance of the wool/nylon(50/50%) fabric from fabric mechanical properties measured by FAST system was better than that of the wool 100% fabric. The dimensional stability of the wool/nylon(50/50%) fabric was more stable than that of the wool 100% fabric. Because relaxation shrinkage was lower and hygral expansion of wool 100% fabric was more high. However, the breathability and pilling property of the wool/nylon(50/50%) fabric were inferior than those of the wool 100% fabric. The possibility of application for tra-biz garment of wool/nylon(50/50%) blend fabric was observed because of good heat keepability, tactile wearing performance and washing fastness.

• 복식문화연구
• /
• 제9권1호
• /
• pp.33-43
• /
• 2001

In this study, both kinds of materials, that is, leather and woolen fabrics, which have similar thickness, have been adopted. To determine proper length of ease, not only sleeve cap height but also sleeve width has been adjusted mainly based on 5cm length of the ease, which follows maximum sleeve cap height, and then different length of ease, for example, 4cm, 3cm, 2cm and 1cm of ease, have been made. As a result, eighteen kinds in total of sleeves have been made: In other words, each nine kinds of both leather and woolen fabrics have different ease lengths. In addition, each sleeve has been inspected visually and functionally. Following conclusion has been gotten based on outcome of the study: 1. Proper ease length for manufacture of leather garment is said to be 1∼2 cm. As a result, ease length with higher sleeve cap height shall be 1∼2cm, while the length with lower sleeve cap height shall be 1cm or less. 2. Wider sleeve width has better function. Considering relations with sleeve cap height, sleeve width shall exceed +4cm of bicep line. 3. to satisfy a variety of those conditions while manufacturing leather garment, sleeve cap height, which is used for the manufacture of full dress and street wear garment, To lessen the ease length, body A.H shall be relatively loose under the arms, or pad shall be supplemented on the shoulder, so that the difference had better be lessened to solve such problems.

• 대한가정학회지
• /
• 제38권3호
• /
• pp.149-161
• /
• 2000

The purpose of the study was to examine the effect of Tencel fabrics on physiological reactions of a human body and thermal comfort under the hot environment. The 3 females subjects in their twenties were selected and a wear sensation test of the subjects was performed with four experimental ensembles made of cotton and Tencel fabrics for the study in the hot environment(3$0^{\circ}C$, 70%RH). The resets of the test were summarized as follows: For the mean skin temperature, Tencel garments showed about 0.2$^{\circ}C$-0.4$^{\circ}C$ lower than that of the cotton garment. The temperature of the rectal was 0.2$^{\circ}C$-0.4$^{\circ}C$ lower for Tencel garments than that for the colon garment. In the form of ensembles, the order of rectal temperature of the subjects for both Tencel and cotton ensembles was 1>IV>III>II. In the body weight loss according to garment materials, Tencel had a lower and more uniform than the cotton Thus, it could concluded that if the perspiration took into account, garments made of Tencel can be more ideal than that of the cotton. The heart rate and oxygen consumption appeared to be proportional to each other. For the heart rate, ensemble TI and TII of Tencel were much lower than ensemble CI and CII. For whole enembles except for TIV, Tencel ensembles showed relatively better thermal sensation and comfort sensation than the cotton ensembles. In the fatigue sensation, the reactions of the subjects were “slightly fatigue” and “fatigue” for the cotton, but “neutral” and “slightly fatigue” for Tencel.

• 한국의류학회지
• /
• 제44권2호
• /
• pp.310-320
• /
• 2020

This study established a lower garment sizing system for abdominal obesity adult women aged 30-59 based on 277 females selected from the 7th Size Korean Anthropometric survey. The criteria for subjects in this study were over 25 kg/㎡ of the BMI, over 85 cm of waist, and over 0.8 waist hip ratio. The results are as follows. The lower body analysis of abdominal obesity adult women showed that average circumference items were larger than the ordinary size, and the average length items were smaller. The standard deviation was applied around the average values of waist circumference and hip circumference for the suggestion of a lower garment sizing system for abdominal obesity adult women. The interval between the designation was ±1.5 cm with a waist circumference of 100 cm and ±2.5 cm with an average hip circumference of 100 cm. We established 13 designation sections in consideration of the cover ratio and cover efficiency. The cover ratio in the 13 nominal sections was 71.5%. The segmental distribution rate presented in the results will also be useful for production planning in specific sizes that helped enable rational production.

• 한국의류산업학회지
• /
• 제19권1호
• /
• pp.90-100
• /
• 2017

In this research, consumer awareness investigation and wearing test were carried out for obtaining useful data on the development of thermo-sensitive functional clothing material. A survey involved 216 people in Seoul and Kyeonggi-do, and 200 questionnaires data were analyzed by descriptive statistics and frequency using SPSS 17.0. Four healthy men in twenties were participated for wearing test. Subjects in normal loungewear were exposed to temperature change from the initial temperature $30^{\circ}C$ down to $5^{\circ}C$ for an hour in a climate chamber. The environmental temperature, surface temperature of garment and skin were measured. As a result, most of respondents have all season clothing products such as underwear, hosiery, and jogging suit for loungewear. Also, thermo regulator y functional clothes are frequently used as underwear and sweat shirt. The consumer awareness investigation on thermo regulatory functional clothing showed that the most important key buying factor is quick climate temperature response, easy maintenance, design and cost, in that order. Surface temperature of garment went down with the cooling down of environmental temperature. The lower environmental temperature, the greater temperature difference by body part showed. Skin temperature change by environmental temperature showed similar tendency of garment surface temperature. In comparison between garment surface and body skin, temperature difference became larger under the lower environmental temperature.

• 복식
• /
• 제59권8호
• /
• pp.49-65
• /
• 2009

As basic materials in this research, 874 pieces of engraving that recorded the garment produced by diverse authors in the 17-18th century were collected among the collections of male and female garment in the engraving kept by National Library of France and 216 pieces of engraving were classified among them to observe justaucorps as stated in the materials. Since type of justaucorps in the 18th century can be classified by difference in shape and change through the above engraving materials in large quantity and the shape and composition can be compared and analyzed with other materials such as picture, stored garment, written materials without difficulty, the chronology can be composed by single type of justaucorps. Intending to understand the change in composition caused by type classification and pattern making as per analysis of type property of justaucorps, the men's upper garment in France in the 18th century. Checking change in design per from and materials, justaucorps of 1680-1700s was in silhouette where waist in the length above knee was adhered and slightly spread to lower part. In the type of 1710-1750s, waist adhered remarkably and many pleats were made under waist to produce volume of form that spread to lower part like skirt. In the type of 1760-1780s, straight silhouette was attached to whole body and end of front adjustment in slant line turns to rear part. The developmental aspect of construction can be checked by making pattern. Changing the cutting line of body plate to smoothly connect section and to try to adhere to the body, the development of simpler and delicate pattern production technique was confirmed.