• Journal of the Korean Home Economics Association
• /
• v.41 no.3
• /
• pp.1-15
• /
• 2003

This study was conducted to analyze the actual wearing conditions and body fit preferences of the middle-aged women's ready-to-wear lower body clothing. The aim was also to analyze lower body recognition, lower body satisfaction, fit preferences and size satisfaction according to age and degree of girth size. A questionnaire was developed and administered to 300 middle-aged women aged 34 to 59. Statistical tests such as descriptive analysis, crosstabs, and X²-tests were conducted to analyze the data and ascertain the differences between the ages. Lower body satisfaction and recognition were compared by T-test. Also, Anova was used to analyze lower body recognition, satisfaction, fit preferences, and size satisfaction according to age and degrees of girth size. The results indicated that women aged 50 to 59 were more dissatisfied with the ready-to-wear sizing system and because of their body shapes had changed, their need for a larger size range system had also increased. Moreover, the element that most affected their purchase of ready-to-wear lower body clothing was the design followed by the size. The women, especially of the ages 50 to 59, showed a tendency to he dissatisfied with their lower bodies and they recognized that their lower bodies had thickened compared to women aged 34 to 39 and 40 to 49. Analysis of body satisfaction, recognition, and fit preference according to girth size showed that the group of larger girth size recognized that their lower bodies were thicker and were more dissatisfied and preferred looser fittings than the groups of smaller women.

• Journal of the Korean Society of Safety
• /
• v.31 no.5
• /
• pp.95-101
• /
• 2016

This study proposes a multi-scale dynamic system reliability analysis of control system as a method of quantitative evaluation of its performance in probabilistic terms. In this second paper, we discuss the control effect of the viscous damper on the seismic performance of the structure-level failure. Since the failure of one structural member does not necessarily cause the collapse of the structural system, we need to consider a set of failure scenarios of the structural system and compute the sum of the failure probabilities of the failure scenarios where the statistical dependence between the failure scenarios should be taken into account. Therefore, this computation requires additional system reliability analysis. As a result, the proposed approach takes a hierarchial framework where the failure probability of a structural member is computed using a lower-scale system reliability with the union set of time-sequential member failures and their statistical dependence, and the failure probability of the structural system is again computed using a higher-scale system reliability with the member failure probabilities obtained by the lower-scale system reliability and their statistical dependence. Numerical results demonstrate that the proposed approach can provide an accurate and stable reliability assessment of the control performance of the viscous damper system on the system failure. Also, the parametric study of damper capacity on the seismic performance has been performed to demonstrate the applicability of the proposed approach through the probabilistic assessment of the seismic performance improvement of the damper system.

• The Korean Journal of Community Living Science
• /
• v.24 no.3
• /
• pp.391-397
• /
• 2013

This study was conducted to define the characteristics of the fan according to the bed depth of rough rice for the silo used in South Korea. In this study, the characteristics like air flow resistance and air flow rate of the fan were investigated for an independent blowing system with 1 fan and the serial blowing system with 2 fans. In the experiment, the depth of rough rice was determined by 0, 1, 2, 3.2 and 4.5 m for an independent blowing system and the depth of rough rice was 4.5 m for the serial blowing system. The air flow resistances of the blowing fan and the suction fan in an independent blowing system were 55 mmAq and 88 mmAq respectively. In addition, the air flow resistance of the serial blowing system was 61% lower than the blowing fan and 28% lower than the suction fan of the independent blowing system. The air flow rates of the blowing fan and the suction fan in the serial blowing system were 516 $m^3/min$, 570 $m^3/min$, respectively. The former was 22% higher than the blowing fan while the latter was 29% higher than the suction fan in the independence blowing system. In other words, the serial blowing system was superior to the independent blowing system in blowing characteristics because the air flow rate was lower and air flow resistance was higher than the independent blowing system. However, the fan power consumption of the serial blowing system was more than 100% comparing with the independent blowing system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.353-362
• /
• 2019

Thermodynamic analysis of cascade refrigeration systems has attracted considerable research attention. On the other hand, a system evaluation based on thermodynamic analyses of the individual parts, including the evaporator, condenser, intercooler, expansion valve, etc., has received less attention. In this study, performance analysis was conducted on a cascade refrigeration system, which has an individual cooling and refrigeration evaporator, and equips the intercooler and air-cooled condenser in a series in a lower cycle. The thermo-fluid design was then performed on the major components of the system - upper condenser, lower condenser, cooling evaporator, refrigeration evaporator, intercooler, compressor, electronic expansion valve - of 15 kW refrigeration, and 8 kW cooling capacity using R-410A. A series of simulations were conducted on the designed system. The change in outdoor temperature from 26 C to 38 C resulted in the cooling capacity of the lower evaporator remaining approximately the same, whereas it decreased by 9% at the upper evaporator and by 63% at the intercooler. The COP decreased with increasing outdoor temperature. In addition, the COP of the cycle with the intercooler operation was higher that of the cycle without the intercooler operation. Furthermore, the increase in the upper condenser size by two fold increased the upper evaporator by 4%. On the other hand, the lower evaporator capacity remained the same. The COP of the upper cycle increased with increasing upper condenser size, whereas that of the lower cycle remained almost the same. When the size of the lower condenser was increased 2.8 fold, the intercooler capacity increased by 8%, whereas those of upper and the lower evaporator remained approximately the same. Furthermore, the COP of the lower cycle increased with an increase in the lower condenser. On the other hand, the change of the upper condenser was minimal.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.1
• /
• pp.57-64
• /
• 2022

This study investigated the structural performance of the RC boundary beam-wall system subjected to axial loads that required lesser construction quantity and smaller floor height in comparison with the conventional RC transfer girder system. Four specimens of 1/2 scale were constructed, and their peak strengths under axial loads and failure characteristics were compared and analyzed. Test parameters included the ratio of the lower to the upper wall length, lower wall thickness, and stirrup details of the lower wall. In addition, three-dimensional nonlinear finite element analysis was performed to verify the effectiveness of the boundary beam-wall system. The peak strength of each specimen was similar to the nominal axial strength of the lower wall, indicating that the axial load was transferred smoothly from the upper to the lower wall. The contribution of the lower wall cross-section was high if the ratio of the lower to the upper wall length was small; the contribution was low if the out-of-plane eccentricity existed in the lower wall. The specimen with smaller stirrup distance and cross-ties in the lower wall showed higher initial stiffness and peak load than other specimens.

• The Korean Journal of Community Living Science
• /
• v.17 no.3
• /
• pp.89-97
• /
• 2006

This study was conducted to compare soybean growth and yield and the degree of weed emergence according to no-tillage and conventional tillage system in two different drained paddy fields, loam of Chilgok series and silty clay loam of Deokpyeong series. In both soil conditions, the maturing time of the soybeans by the no-tillage system was two days earlier than that by the conventional tillage system. In the loam of Chilgok series, the stem length of the soybeans in the no-tillage system was 5.7 cm longer than that in the conventional tillage system. The miss-planted rate and diseased plants of black root rot (Calonectria iliacola) in the no-tillage system were 9.2% and 2.8% lower, respectively than those in the conventional tillage system. Also, the nodulation and seed yield in the no-tillage system were 32% and 13% more, respectively, than those in the conventional tillage system. In the silty clay loam of Deokpyeong series, the stem length of the soybeans in the no-tillage system was 4.6cm shorter than in the conventional tillage system. The diseased plants of black root rot (Calonectria iliacola) in the no-tillage system were 4.2% lower than those in the conventional tillage system. Also, no significant difference in the seed yield between the no-tillage and conventional tillage systems was observed. On the other hand, there was a lower occurrence of weed in the no-tillage system than in the conventional tillage system, and the income increased by 19% owing to yield increase and reduced management costs.

• The Journal of Korea CHUNA Manual Medicine
• /
• v.5 no.1
• /
• pp.117-133
• /
• 2004

The purpose of this article is making a contribution to add the knowledges of meridian muscles and myofascial meridians of lower limb that relate with gait and basic movements. We have researched on the gait analysis, basic analysis of articular movement and the related muscles. In addition this article is suggested to study about the therapy with apply meridian muscles and myofascial meridians to lower limb's motor disturbance.

• Fire Science and Engineering
• /
• v.17 no.2
• /
• pp.50-55
• /
• 2003

The lower flash points for the binary system, n-butanol+n-decane, were measured by Pensky-Martens closed cup tester. The experimental results showed the minimum in the flash point versus composition curve. The experimental data were compared with the values calculated by the reduced model under an ideal solution assumption and the flash point-prediction models based on the Van Laar and Wilson equations. The predictive curve based upon the reduced model deviated form the experimental data for this system. The experimental results were in good agreement with the predictive curves, which use the Van Laar and Wilson equations to estimate activity coefficients. However, the predictive curve of the flash point prediction model based on the Willson equation described the experimentally-derived data more effectively than that of the flash point prediction model based on the Van Laar equation.

• Journal of Computing Science and Engineering
• /
• v.5 no.1
• /
• pp.19-31
• /
• 2011

In this paper, we propose two new routing schemes for double-layered peer-to-peer systems; a shorter-lower mobility routing scheme and a reverse path routing scheme. The shorter-lower mobility routing scheme first chooses shortest routing paths among possible routing paths and selects the path associated with the relay peer who has lower mobility to improve the reliability of the system. The reverse path routing scheme carries out unicasting (instead of multicasting) based on the reverse path information that can be obtained during the initial file search to further reduce network traffic. The experimental results showed that a double-layered peer-topeer system with the proposed hybrid scheme improved the reliability of the system about 1.5% over the hop count scheme and reduced network traffic by about 0.5% compared to the hop count scheme.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.13 no.21
• /
• pp.101-110
• /
• 1990

This study presents a two-level inventory distribution system with one-upper level facility(warehouse) in first echelon and n-lower level facilities(stores) in the second echelon. The demand process at the upper level is induced by the aggregated backorder processes of n independently operated lower level facilities in parallel. For the upper level and the lower level we find the decision points and the distribution function of the aggregate backorders from n-stores. Optimal allocation units and expected system profits are obtained. If the product is of great enough importance to the customer, echelon structure will include a shadow installation. Also, this case is analyzed. Numerical examples are presented to illustrate the results for each case.