• 소성∙가공
• /
• 제25권6호
• /
• pp.402-408
• /
• 2016

A manufacturing technology of carbon fiber composites with thermoplastic polymer pellets and continuous woven fiber was investigated using a compression molding process. To secure the impregnation of resin into the porosity of fabric the composite specimens were prepared with general injection-molding grade polypropylene pellets and low viscosity polycarbonate pellets. Tensile tests of polypropylene and polycarbonate composites were performed. Polycarbonate composites showed higher fracture strength than that of polypropylene composites because of the difference of matrix properties. However, the increase rate of strength was lower than that of polypropylene composites due to the difference of coherence between matrix and reinforcement. To investigate the effect of carbon fiber volume fraction on the fracture strength variation polypropylene composites with different volume fraction were compression molded and tensile tests were performed together. It was shown that the fracture strength of the polypropylene composites increased by 3.2, 5.4 and 6.9 times with the increase of carbon fabric volume fraction of 0.256, 0.367, and 0.480, respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제51권2호
• /
• pp.81-97
• /
• 2023

The aim of this study were to evaluate tannin resorcinol formaldehyde (TRF) for the preparation of cross-laminated timbers (CLTs) made from fast-growing tree species and to analyze the physical and mechanical properties of CLTs. TRF copolymer resin was prepared by using the bark extracts of Swietenia mahagoni (L.) Jacq. It was observed that the TRF adhesive possessed less solid content (23.59%), high viscosity (11.35 poise), and high pH values (10.0) compared to the standard phenol resorcinol formaldehyde. The TRF adhesive was applied to produce CLTs with the addition of 15% tapioca and flour as an extender. The six-layered CLTs were produced from sengon (Falcataria moluccana Miq.), jabon [Anthocephalus cadamba (Roxb) Miq.], coconut (Cocos nucifera L.), and the combination of coconut-jabon and coconut-sengon wood. The analysis of variance revealed that the layer composition of CLT significantly affected the physical and mechanical properties of the beam. While the modulus of rupture met the standard, the moisture content and modulus of elasticity values did not fulfill JAS 1152-2007. All of the CLTs produced in this study demonstrated low formaldehyde emission, ranging from 0.001 mg/L to 0.003 mg/L, thereby satisfying the JAS 1152 for structural glue laminated timber.

• Restorative Dentistry and Endodontics
• /
• 제27권2호
• /
• pp.142-149
• /
• 2002

Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988: Crim, 1989). Plowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfill had the least leakage (Rundle et at. 1997) Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 compostite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group (group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St. Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfill [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite［AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix II system, MTS Systems Corp. Minn. USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2％ methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruscal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p = 0.05) Results : 1. There was significantly less microleage in enamel margins than dentinal margins of all groups (p＜0.05) 2. There was no significant between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. there was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R＞A =H=M＞D＞Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In enamel margins, load cycling did affect the marginal microleakage only in Revolution. (p＜0.05).

• Composites Research
• /
• 제12권6호
• /
• pp.74-82
• /
• 1999

폴리 우레탄 폼 코아 샌드위치 복합재료의 정적 및 피로 특성에 대하여 연구하였다. 유리 섬유강화 스킨과 중합의 폼 코아를 갖는 비스티칭, 스티칭, 스티프너의 세 종류 시편이 사용되었다. 특히 스티칭 샌드위치 구조는 두께 방향에 대하여 폴리에스터와 유리섬유를 꼬아서 부가적인 구조 보강이 코아의 상하 표면을 통하여 꿰멘 구조로 층간분리를 최소화하기 위해 샌드위치 구조 패널을 스티칭하여 만들고 수지는 수지의 유동 온도에서 수지의 낮은 점도 특성을 이용하여 스티칭 섬유에 침투시켜 함께 경화하였다. 스티칭 섬유가 $50{\times}50{\;}mm$의 간격으로 스티칭된 시편 및 스티프너 시편의 굽힘강도는 비스티칭 시편과 비교하여 각각 50%및 10배 이상으로 향상되었다. 최대 하중의 20%크기로 $10^6$ 피로 사이클을 받은 후, 비스티칭 시편의 굽힘 피로강도는 정적 굽힘강도와 비교하여 27%까지 감소되었고, 스티칭된 시편은 39%,그리고 스티프너에 의하여 보강된 시편은 20%정도 감소되었다. 폴리우레탄 폼 코아의 에이징 효과를 입증하기 위해, 피로 시험 후 샌드위치 시편의 표면 적층의 손상은 초음파 C-scan장비를 사용하여 검출하였다. 초음파 C-scan결과로부터 피로 시험동안 손상 받은 어떤 결함도 없었다 이는 피로 사이클동안 폼 코아 샌드위치 구조에 대한 굽힘강도의 감소는 폴리우레탄 폼이 에이징되어 발생하는 것을 의미한다.

• 대한소아치과학회지
• /
• 제33권4호
• /
• pp.653-660
• /
• 2006

Fuji VII은 제 1, 2대구치의 조기보호를 목적으로 소개되었으며 기존의 글래스 아이오노머 시멘트보다 많은 양의 불소를 유리하면서도 점도가 낮아 흐름성이 우수하고 부가적인 산부식 과정이 필요 없는 특징 때문에 치은판개가 일부 덮인 제 1, 2대구치의 교합면이나 일부만 노출된 대구치 협면구의 우식 예방과 재광화에 유용하다고 하였다. 본 연구의 목적은 Fuji VII의 재광화 효과를 알아보고 기존의 글래스 아이오노머 시멘트, 레진 강화형 글래스 아이오노머 시멘트, 콤포머와 복합레진의 재광화 효과를 비교하고자 하였다. 이에 인공적으로 형성한 우식을 가진 42개의 치아에 Fuji VII, Fuji II, Fuji II LC improved F2000, $Filtek^{TM}$ Z250의 재료를 충전하고 편광현미경 상에서 충전 직후와 4주 후 탈회 면적을 측정하였으며 두 면적의 차이를 비교하여 다음의 결과를 얻었다. 1. 재광화 정도는 Fuji VII, Fuji II, Fuji II LC improved, F2000, 대조군, $Filtek^{TM}$ Z250 순으로 크게 나타났으며, 글래스 아이오노머 계통의 Fuji VII, Fuji II, Fuji II LC improved에서 F2000, $Filtek^{TM}$ Z250, 대조군에 비해 유의한 재광화가 나타났다(p<0.05). 2. Fuji VII과 Fuji II Fuji II LC improved 간에는 유의한 재광화 정도의 차이는 관찰되지 않았다(p>0.05).