• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.529-537
• /
• 2000

The effects of the gel content on the cell structures of PP sheets by using an electron-curing system were investigated. Three extruded PP sheets crosslinked by three different doses were used for the batch foaming process with the supercritical state $CO_2$. Experiments were also performed in order to study the effects of the gel content, saturation pressure and temperature on cell structures. Then foaming conditions, such as temperature and duration of time, were changed. The amount of gas absorbed into PP samples was not affected by gel contents and the operating condition of saturation pressure, which was higher than 2000 psi. The foam cells of PP with a low gel content grew irregularly at a higher foaming temperature and for a longer duration of foaming time. However, PP samples with high gel content showed even cell structures and narrow tell size distributions under the severe conditions of high foaming temperatures and long duration of foaming time.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1131-1137
• /
• 2004

With the recent continuous expansion of subways, newly created subways tend to have lower locations and wider sections. Furthermore. since box structures and evacuating tunnels are classified into a category of mass-concrete. the thermal-stress, emitted from the inside. causes cracks to structures from the inception of constructing. In this paper, thermal-stress analysis and durability evaluation of box structure were carried out to investigate relationship between durability and parameter causing the heat of hydration. Through the examination, this paper tries to find out satisfactory solutions to regulated thermal crack and ensure the required duration period. The results of this paper showed that to control thermal crack and guarantee the required duration period it was more effective to use low-heat-portland cement and moderateheat-portland cement. As cement volume due to reduction of water-cement ratio increased, the possibility of thermal cracks occurrence increased but results of durability evaluation was different depending on evaluation method. The results showed that the appropriate water-cement ratio to control the heat of hydration and satisfy the required durability was $45\∼55\%$. And it was showed that during placement of concrete blocks ambient temperature affect the heat of hydration. thermal crack and long-term durability largely and when concrete was placed at low temperature to control thermal crack. it need to try to guarantee the required duration period. Henceforth, by studying not only internal and external conditions, such as the relative humidity and the unit weight. but also methods, to evaluate durability, in accordance with domestic situations, more reasonable design of durability should be achieved.

• Journal of Plant Biology
• /
• v.38 no.4
• /
• pp.373-380
• /
• 1995

Photoinhibition of photosystem (PS) n was induced in primary leaves of 25 day-old peppers grown $100\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1},\;at\;25^{\circ}C$. The modulation of PSII functionality in vivo was induced by varying both irradiance ($0-3000\;{\mu}molm^{-2}{\cdot}s^{-1}$) and duration (0-70 min) of light treatment. The functionality of PSII was investigated in terms of photochemical efficiency of PSII (Fv/Fm) and quantum yield of $O_2$ evolution, and expressed as a function of photon exposure [$mol\;photons{\cdot}m^{-2}$, the product of irradiance and duration of light treatment (Bell and Rose, 1981)]. Contrary to the linear decline of Fv/Fm ratio showing 50% decreases by absorption of $10\;mol\;photons{\cdot}m^{-2$, quantum yield of $O_2$ evolution decreased biphasically with increasing photon exposure, showing 50% decreases by absorption of $5.5\;mol\;photons{\cdot}m^{-2}$. Treatment of low temperature at $15^{\circ}C$ for 30 min alone did not affect the functionality of PSII, but high temperature ($45^{\circ}C$) significantly inactivated PSII activity. However, when Jeaves of pepper were subjected to low or high temperature in the presence of light, PSII was substantially photoinactivated. These results suggest the presence of different photoinhibitory mechanisms at low and high temperature.rature.

• Journal of the Korean Ceramic Society
• /
• v.42 no.7 s.278
• /
• pp.521-524
• /
• 2005

ZnO 2-D nanowall structure with around 100 nm thickness, which is composed of tens of nm scale ZnO single crystals, was fabricated through the low temperature chemical solution growth method. Electro Chemical Deposition (ECD) technique was applied to attach the ZnO seed crystals on ITO coated glass substrate. The ZnO nanowall structure was grown in the 0.015 mol$\%$ of aqueous solution of zinc nitrate and hexamethenamine at 60$^{\circ}C$ for 20 - 40 h. The nanowall structure depends on the ECD condition or the applied voltage and duration time. The nanowall shows a photoluminescence around 550 - 700 nm spectrum range.

• The Korean Journal of Malacology
• /
• v.28 no.1
• /
• pp.29-35
• /
• 2012

Growth patterns of the Manila clam, Ruditapes philippinarum in each tidal level were studied in the intertidal zone in Tae-an on the west coast of South Korea from April to August 2009. Environmental factors and the specimens of R. philippinarum were monthly collected at three intertidal locations: low intertidal zone, low-middle intertidal zone and middle intertidal zone. Temperature of sediment in low intertidal zone were lower than those in other intertidal locations. Concentrations of Chl-${\alpha}$ were not significantly different between in each tidal level. Exposure hours in low intertidal zone were shorter than those in other intertidal locations. Density of each year class in low intertidal zone were higher than those in low-middle intertidal zone and middle intertidal zone. Growth factors of R. philippinarum in low intertidal zone were better than those in other intertidal locations. The growth rate of under one year class individuals of low intertidal zone were higher than those in low-middle intertidal zone and middle intertidal zone, before the main recruitment period of R. pilippinarum. Although the growth patterns of R. philippinarum may be affected by various environmental factors, we suggests that the exposure duration is the main affect in the growth patterns of R. philippinarum in intertidal zone.

• Journal of Korean Society on Water Environment
• /
• v.33 no.6
• /
• pp.650-660
• /
• 2017

In this study, pollutant emission characteristics by water damage period analyzed 11 items (water temperature, pH, DO, EC, BOD, COD, TOC, SS, T-N, T-P and flow) with load duration curve, time series load curve and factor analysis for three years (2014-2016). Load duration curve is applied to judge the level of impaired waterbody and estimate impaired level by pollutants such as BOD and T-P in this study depending on variation of stream flow. Water quality standard exceeded the flow of mid-range and low-range by flow condition evaluation using load duration curve. This watershed was influenced by point source more than non-point source. Cumulative excess rate of BOD and T-P kept water quality standard for all seasons (spring, summer, autumn and winter) except BOD 59% in spring. Water quality changes were influenced by pollutants of basic environmental treatment facilities and agricultural areas during spring and summer. Results of factor analysis were classified commonly first factor (BOD, COD, and TOC) and second factor (flow, water temperature and SS). Therefore, effects of artificial pollutants and maintenance water must be controlled seasonally and reduced relative to water damage caused by point pollution sources with effluent standard strengthened in the target watershed.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.5
• /
• pp.370-378
• /
• 2015

Background : Aruncus dioicus var. kamtschaticus, functional wild vegetable, is perennial herb and young leaves with soft texture are generally used as edible food. So the demand for the vegetable has increased recently. This study was carried out to determine the effects of temperature and shading on germination characteristics of A. dioicus. Methods and Results : The experiment was performed by temperature and shading treatments. Seed pre-treatment before the germination experiment was carried out by the storage in low temperature ($4^{\circ}C$) under wet condition (LTW) for 0, 15, 30, 45 and 60 days and shading treatment were 35%, 50%, and 75% under control, BA (6-benzyladenine) and $GA_3$ (gibberellic acid) condition for 24 hours. Increasing the length of the storage periods led to increases seed germination percent in low temperature ($4^{\circ}C$) under wet condition (LTW), germination rate of A. dioicus seed was the highest at $15^{\circ}C$ with 60 days of seed pre-treatment. In the case of seeds pre-treatment with LTW, the more temperature went up, the more days to 50% of Germination of Final Germination Rate ($T_{50}$) went down. As a result of surveying shading treatment, germination rate was the highest in control of 35% shading and the next higher was in control of 50% shading. Conclusions : It is concluded that the temperature and shading are important factors to produce A. dioicus. Also, We suggest these results as basic data of A. dioicus for sexual propagation.

• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.118-129
• /
• 2011

In this study, species resistant to forest fire were extracted from high trees through an investigation of combustion mechanism. Here, the average flameless ignition temperatures of living leaves, branches and barks of oak were respectively, $365^{\circ}C$, $440^{\circ}C$ and $435^{\circ}C$, and the average flameless ignition temperatures of living leaves, branches, barks and cones of pine tree were respectively, $320^{\circ}C$, $405^{\circ}C$, $435^{\circ}C$ and $363^{\circ}C$. It shows that generally, pine tree has a lower flameless ignition temperature than oak and thus, has a relatively high risk of flameless ignition. When comparing risk of fire depending on ignition characteristics, Quercus serrata had a low risk of stem fire, and Quercus acutissima and Quercus serrata had a low risk of crown fire, as well. When analysing risk of fire depending on a duration of flame, also, Quercus dentata had a low risk of stem fire, and Quercus variabilis Blume had a low risk of crown fire too. Lastly, when comparing risk of fire, according to heat release rates, Quercus acutissima had a low risk of stem fire, and Quercus acutissima and Quercus dentata had a low risk of crown fire, as well. In conclusion, it was observed that as fire-resistant species, Quercus serrata and Quercus dentata have a low risk of ignition, Quercus variabilis Blume has a short duration of flame after discharging ignition when a forest fire occurs, and Quercus acutissima, Pinus Rigida and Antipathes japonica Brook have low heat release rates.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.11-12
• /
• 2016

The contemporary buildings are becoming super-taller gradually as the industry evolves. Accordingly, winter concrete also became an important element for the year-round construction since shortening of a construction duration became important. Accordingly, this research team once developed a double bubble sheet as concrete cover curing compound during winter. But since there is no proper countermeasure for the exposed reinforcement bars, it is worried that the concrete can be damaged by exposed frozen reinforcement bars at a low temperature during the initial period. Therefore, in this study, it is intended to review the temperature history of the reinforcement bars depending on changes of the covering methods of the exposed reinforcement bars by using bubble sheets.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.270-275
• /
• 2016

The characteristics of the fuel quantity, injection rate and macro spray development was investigated under a range of diesel fuel temperatures. The actual injection quantity decreased despite the same signal of the injection start and injection duration as the fuel temperature decreased. The injection rate measurements confirmed that the actual injection commencement was delayed and the actual injection duration was shortened under lower fuel temperature conditions, which explains why the injection quantity decreased. Spray tip penetration with a lower fuel temperature was longer than that with a higher fuel temperature due to the deteriorated atomization. As a pre-test for the combustion experiment under low temperature conditions, piston targeting with pilot injection was accomplished, which showed that the fuel droplet from pilot injection was introduced into the crevice area. This suggests that the pilot injection quantity and timing should be chosen with careful consideration for actual applications.