• 제목/요약/키워드: Low-temperature SCR

검색결과 96건 처리시간 0.027초

엔진 냉각수 순환에 의한 urea-SCR 시스템용 요소수의 동결 및 해동 특성 (Frozen and Melting Characteristics of Urea-aqueous Solution for Urea-SCR System by Circulation of Engine Coolant)

  • 최병철;김영권;김화남
    • 동력기계공학회지
    • /
    • 제15권4호
    • /
    • pp.42-47
    • /
    • 2011
  • The purpose of this study is to investigate the best melting condition with various winding number of a heating pipe, supplying quantity of engine coolant and coolant temperature at the inlet of the heating pipe. Also, it is to suggest getting method of an appropriate quantity of the agent for the urea-SCR system within 10 minutes. For this matter, this study identifies the temperature distribution of inside of urea-tank while it is frozen at the low temperature condition, and suggests the best melting condition of the frozen urea within 10 minutes. From the results, it was found that 2L of melted urea was obtained by the coolant flow rate of 200L/hr at $70^{\circ}C$ for 10 minutes from the start of engine operating.

Cu-Chabazite SCR Catalysts의 황 피독 및 탈황에 의한 NOx 저감 성능에 관한 연구 (A study of NOx performance for Cu-chabazite SCR catalysts by Sulfur poisoning and desulfation)

  • 남정길
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권8호
    • /
    • pp.855-861
    • /
    • 2013
  • 저온에서 NOx 저감률이 높은 작은 기공을 갖는 Cu-chabazite SCR 촉매는 150 에서 $300^{\circ}C$ 범위의 낮은 배기가스 온도를 갖는 박용 디젤엔진에 적용성이 높다. 불행하게도, 박용디젤엔진용 연료는 체적베이스로 1.5% 이상의 높은 레벨의 황을 함유 할 수 있다. 이것은 공연비 50:1로 엔진 운전시에 배기가스에 이산화황의 레벨이 500 ppm에 해당된다. 배기가스에 포함되어 있는 높은 레벨의 이산화황은 Cu-chabazite SCR 촉매의 NOx 저감률을 감소시키는 역할을 할 수 있다. 본 연구에서는 Cu-chabazite SCR촉매의 황 피독에 의한 NOx 저감 성능을 연구하기 위하여 벤치플로 시스템을 구축하였다. Cu-chabazite SCR 촉매를 황 피독 시키기 위하여 5% 이산화탄소, 14% 산소, 5% 물과 나머지 질소로 만들어진 배기가스에 500 ppm의 이산화황을 각각 150, 200, 250, $300^{\circ}C$에서 2시간씩 노출 시켰다. 황 피독후 Cu-chabazite SCR 촉매의 불활성 한계를 측정하기 위하여 저온(150~$300^{\circ}C$)에서 NOx 저감 성능을 평가하였다. 또한, 600 과 $700^{\circ}C$에서 각각 30분씩 탈황 작업을 수행하여, 황 피독된 Cu-chabazite SCR 촉매의 NOx 저감 성능이 회복될 수 있는 온도를 결정하였다.

Urea-SCR 시스템의 DeNOx 특성에 관한 실험적 연구 (Experimental Study on DeNOx Characteristics of Urea-SCR System)

  • 함윤영;이성호;정홍석;신동현
    • 한국자동차공학회논문집
    • /
    • 제17권2호
    • /
    • pp.180-186
    • /
    • 2009
  • To meet the NOx limit without a penalty of fuel consumption, urea SCR system is currently regarded as promising NOx reduction technology for diesel engines. SCR system has to achieve maximal NOx conversion in combination with minimal $NH_3$ slip. In this study, as a basic research to develop an algorithm for urea injection control, the characteristics of engine out NOx emission and behavior of NOx reduction during steady-state and transient conditions were investigated using 2L DI diesel engine. Test results show that on increasing the catalyst temperature the variations in the outlet NOx concentration are faster and maximal allowable $NH_3$ storage exponentially decreases. For change from a low to high engine load, it can be seen that a few seconds after load-step is required to reach full NOx conversion and the adsorbed amount of $NH_3$ at lower temperature desorb during the next temperature increase, causing $NH_3$ slip. Engine out NOx emission needs to be corrected because NOx emissions just after step load is lower than that of steay state condition.

Ti가 첨가된 Mn-Cu 혼합산화물을 이용한 저온 SCR 반응 특성 (Characterization of Low Temperature Selective Catalytic Reduction over Ti Added Mn-Cu Metal Oxides)

  • 이현희;박광희;차왕석
    • 공업화학
    • /
    • 제24권6호
    • /
    • pp.599-604
    • /
    • 2013
  • 본 연구는 공침법으로 Ti가 첨가된 Mn-Cu 혼합산화물을 이용하여 $200^{\circ}C$ 이하의 저온 영역에서의 $NH_3$-SCR 반응특성에 관한 것이다. 제조된 촉매들은 BET, XRD, XPS, TPD를 이용하여 각각의 물리/화학적 특성을 분석하였다. Mn-Cu 혼합산화물은 매우 큰 비표면적과 저온에서의 높은 SCR 효율을 나타내었으며, Ti가 첨가된 경우 상대적으로 높은 SCR 효율과 $N_2$ 선택도를 나타내었다. 이러한 결과는 Ti가 첨가됨에 따라 화학 흡착된 산소종($Me-O_{ads}$)이 증가하여 NO가 $NO_2$로의 산화가 촉진되고, $Mn^{3+}$와 같은 $NH_3$의 흡착점의 수가 증가되었기 때문이다.

플라즈마 산화와 암모니아 SCR 복합탈질공정의 엔진적용 연구 (A Study on a Combined DeNOx Process of Plasma Oxidation and $NH_3$ SCR for Diesel Engine)

  • 송영훈;이재옥;차민석;김석준;류정인
    • 한국연소학회지
    • /
    • 제12권4호
    • /
    • pp.39-46
    • /
    • 2007
  • The technique of $NH_3$ SCR (selective catalytic reduction) assisted by plasma oxidation has been applied to a 2,000 cc diesel engine. The present combined $deNO_x$ process consists of two steps. The first step is that about 50% of emitted NO from the engine is oxidized to $NO_2$ in a plasma oxidation process. The second step is that NO and $NO_2$ are simultaneously reduced to $N_2$ in the $NH_3$ SCR process. The engine test results showed that the $deNO_x$ rates of the present combined process are higher than those of conventional SCR process by 20%. Such a high performance of the combined process is noticeable especially, when the exhaust temperature are relatively low, i.e., $170-220^{\circ}C$. To provide a feasibility of the present technique the effects of operating conditions, such as an electrical input energy, an exhaust gas temperature, an initial NO concentration, and the amount of hydrocarbon addition, were discussed.

  • PDF

산화촉매를 이용한 Fast SCR에서의 SCR 촉매 저감 연구 (A Study for SCR Catalyst Reduction in Fast SCR Using Oxidation Catalyst)

  • 이재옥;이대훈;송영훈;오동규;서정욱
    • 공업화학
    • /
    • 제24권3호
    • /
    • pp.333-336
    • /
    • 2013
  • 산업현장에서 배출되는 저온($150{\sim}250^{\circ}C$)의 배기가스에 포함된 질소산화물($NO_x$)을 제거하기 위한 공정으로써 산화 촉매와 암모니아 SCR 공정을 복합시킨 fast SCR 탈질공정에 대한 실험적인 연구가 수행되었다. Fast SCR 탈질공정을 위해서는 산화촉매를 이용 NO를 $NO_2$로 전환하는 것이 요구된다. 산화촉매 부피(Oxidation Catalyst Volume, OCV)에 따른 NO 전환율을 실험적으로 확인하였다. OCV 563000 h, 375000 h, 281000 h 각 경우에 NO 전환율은 37% : 45% : 51%이었다. 온도에 따른 fast SCR 탈질효율은 $NO_2/NO_x$ 비율 45%일 때 가장 높았다. $NO_2/NO_x$ 비율 45%, 온도 $200{\sim}250^{\circ}C$ 및 공간속도 $10000{\sim}30000h^{-1}$에서 standard SCR과 fast SCR 탈질효율을 비교한 결과, standard SCR은 공간속도 에 따라 온도별로 차이를 보였으나 fast SCR은 차이를 보이지 않았다. Fast SCR 반응을 고려한 탈질운전에서 공간속도 $10000h^{-1}$에서의 촉매부피와 비교하여 공간속도 $30000h^{-1}$으로 운전할 경우, NH3 SCR 촉매부피를 50% 이상 줄일 수 있음을 알 수 있었다.

Sb 첨가에 따른 VWTi 촉매의 암모니아 선택적 촉매 환원(SCR)을 통한 질소산화물 저감 (Selective Catalytic Reduction (SCR) of NOx with NH3 on Sb-promoted VWTi Catalysts)

  • 김수빈;최경륜;신중훈;홍성창
    • 공업화학
    • /
    • 제32권1호
    • /
    • pp.35-41
    • /
    • 2021
  • NH3-SCR에서 상용촉매로 사용되고 있는 VWTi (VOx/WO3-TiO2)는 300~400 ℃에서 우수한 탈질성능을 나타내지만 300℃ 이하 저온에서는 효율이 저하되는 문제가 있다. 저온 탈질효율을 높이기 위하여 promoter를 첨가한 촉매 연구는 꾸준히 진행되고 있으나 촉매의 저온 탈질효율 증진원인과 촉매특성에 관한 연구는 미비한 실정이다. 본 연구에서는 VWTi에 Sb(antimony)를 첨가함으로써 300 ℃ 이하의 NH3-SCR 반응에서 탈질 성능이 10% 이상 증진되는 것을 확인하였고, 이 때 외부확산/내부확산에 의한 영향을 배제하고자 공간속도와 촉매입자 크기를 제어하였다. 또한 Sb의 첨가 유·무에 따른 촉매특성을 BET, TEM/EDS, O2-TPD, H2-TPR, DRIFTs 분석을 수행하여 고찰하였다. Sb의 첨가는 촉매의 표면 흡착 산소 종을 증가시켰으며, 이에 따라 저온에서 촉매의 산화·환원(redox) 특성이 증진되어 우수한 탈질성능을 나타내는 것으로 판단되었다.

중형 운행 경유차용 Urea-SCR 시스템의 아랫첨자 $NO_X$ 저감성능에 미치는 영향인자 (Influential Factors for NO_X Reduction Performance of Urea-SCR System for an In-use Medium Duty Diesel Engine)

  • 김홍석;정용일;송명호;이성욱;박현대;황재원
    • 한국자동차공학회논문집
    • /
    • 제17권1호
    • /
    • pp.154-161
    • /
    • 2009
  • This study is a part of project of urea-SCR system development for an in-use medium duty diesel engine. This study shows the effect of ammonia oxidation catalyst and SCR volume on $NO_X$ reduction performance. When AOC(Ammonia Oxidation Catalyst) is not used, the urea injection should be controlled accurately to prevent $NH_3$ slip. However, it is found that the accurate $NH_3$ slip control is not easy without AOC in real engine operating conditions, because $NH_3$ and $NO_X$ reaction characteristics change with many factors such as exhaust gas temperature and $NH_3$ absorbance on SCR. SCR volume is also one of important design parameters. This study shows that $NO_X$ reduction efficiency increases with increase of SCR volume especially at high space velocity and low exhaust gas temperature conditions. Additionally, this paper shows the emissions of EURO-2 medium duty diesel engine can be improved to the level of EURO-5 with a DPF and urea-SCR system.

이유체 노즐 미립화 특성이 요소 열분해에 미치는 영향 (Effect of Atomization Characteristics of Twin Fluid Nozzle on Urea Pyrolysis)

  • 구건우;정경열;윤현진;석지권;홍정구
    • 한국분무공학회지
    • /
    • 제20권3호
    • /
    • pp.162-167
    • /
    • 2015
  • Recently, there has been rising interest in applying urea-SCR systems to large marine diesel engines because the International Maritime Organization (IMO) has decided to enforce NOx reduction regulations. Generally, in the case of urea-SCR of the marine diesel engine, a type of twin fluid atomizer has been using for injection of the urea solution. This study conducted to investigate an effect of the atomization of external-mixing twin fluid nozzle on the conversion efficiency of reductant. The lab-scaled experiment device was installed to mimic the urea-SCR system of the marine diesel engine for this study. In a low temperature inflow gas condition which is similar with the exhaust temperature of large marine diesel engine, this study found that the conversion efficiency of reductant of when relative big size urea solution droplets are injected into exhaust gas stream can be larger than that of when small size urea solution droplets are injected. According to results of this study, the reason was associated with decrease of reaction rate constant caused from temperature drop of inflow gas by assist air of twin fluid atomizer.

망간황화물을 이용한 NO의 선택적 촉매 환원 (Selective Catalytic Reduction of NO on Manganese Sulfates)

  • 정순관;박태성;홍성창
    • Korean Chemical Engineering Research
    • /
    • 제46권3호
    • /
    • pp.473-478
    • /
    • 2008
  • 망간황화물이 NO의 선택적 촉매 환원에 미치는 영향을 반응성 및 속도론적평가와 TPR(Temperature Programmed Reduction), TGA분석을 통하여 고찰하였다. 망간산화물은 $200^{\circ}C$ 이하의 저온에서 우수한 질소산화물 전환을 보였으나, 망간황화물의 경우 황화정도에 따라 질소산화물 전환은 고온으로 전이하였다. 또한 질소산화물 전환율도 황화정도에 따라 감소하였다. TPR 실험결과 망간산화물들은 $160^{\circ}C$ 이하의 낮은 온도에서 환원이 시작되었으나 망간황화물은 $280^{\circ}C$ 이상의 온도에서 환원이 시작되었다. TPR 실험을 통한 환원 시작온도는 촉매의SCR 시작 온도와 관련이 있는 것으로 판단된다. 망간황화물의 활성화에너지는 다른 촉매에 비해 낮게 나타났으나 pre-exponential 상수 크기가 다른 촉매에 비해 1/1000배 만큼 작아 NO에 대한 활성이 낮게 나타났다. 천연망간광석은 함유된 다양한 금속산화물의 영향으로 순수한 망간산화물보다 낮은 온도에서 재생되었다.