• Journal of the Korean Wood Science and Technology
• /
• 제48권5호
• /
• pp.581-590
• /
• 2020

Pulp refining is the major way to alter the properties of fibers and formed paper. Different combinations of the bar profile of the rotor and stator during low consistency refining processes directly affect the properties of the paper. In this study, a mixture of softwood and hardwood pulp was refined by varying the bar angle of the stator while that of the rotor is fixed at 0º. The pulp samples were collected at different refining times. Then, the pulp and paper properties, such as beating degree, fiber external fibrillation, and tensile and tear indexes were measured to explore the effects of the combined refining plates at different bar angles on paper properties. The results of the experiment show that the combined refining plate of 0º and 5º recorded the most significant improvement in the pulp beating degree and fiber external fibrillation. This consequently increased the fiber bonding area, which in turn, improved both the tensile and the tear indexes of the paper. Also, the influence of the combined refining plates with a larger bar angle on the paper properties was weaker compared to that of smaller angles. This study not only provides ideas for the bar profile design but also improves the optimal selection of refining plates.

• Wind and Structures
• /
• 제38권2호
• /
• pp.129-146
• /
• 2024

Aiming at the problem of non-stationary wind field simulation of downbursts, a non-stationary down-burst generation system was designed by adding a nozzle and program control valve to the inlet of the original wall jet model. The computational fluid dynamics (CFD) method was used to simulate the downburst. Firstly, the two-dimensional (2D) model was used to study the outflow situation, and the database of working conditions was formed. Then the combined superposition of working conditions was carried out to simulate the full-scale measured downburst. The three-dimensional (3D) large eddy simulation (LES) was used for further verification based on this superposition condition. Finally, the wind tunnel test is used to further verify. The results show that after the valve is opened, the wind ve-locity at low altitude increases rapidly, then stays stable, and the wind velocity at each point fluctuates. The velocity of the 2D model matches the wind velocity trend of the measured downburst well. The 3D model matches the measured downburst flow in terms of wind velocity and pulsation characteris-tics. The time-varying mean wind velocity of the wind tunnel test is in better agreement with the meas-ured time-varying mean wind velocity of the downburst. The power spectrum of fluctuating wind ve-locity at different vertical heights for the test condition also agrees well with the von Karman spectrum, and conforms to the "-5/3" law. The vertical profile of the maximum time-varying average wind veloci-ty obtained from the test shows the basic characteristics of the typical wind profile of the downburst. The effectiveness of the downburst generation system is verified.

• Journal of Animal Science and Technology
• /
• 제63권3호
• /
• pp.475-490
• /
• 2021

An experiment was conducted to determine the effects of two levels of rumen undegradable protein (RUP) without or with whole or extruded flaxseed on milk yield, milk component, milk fatty acids (FAs) profile and plasma metabolites in transition ewes. Three weeks before and after lambing, seventy-two Baluchi ewes were used in a completely randomized design with a 3 × 2 factorial arrangement of treatments. The treatments contained 1) no flaxseed + 20% RUP (no flaxseed, low RUP [NFLR]); 2) no flaxseed + 40% RUP (no flaxseed, high RUP [NFHR]); 3) 10% whole flaxseed + 20% RUP (whole flaxseed, low RUP [WFLR]); 4) 10% whole flaxseed + 40% RUP (whole flaxseed, high RUP [WFHR]); 5) 10% extruded flaxseed + 20% RUP (extruded flaxseed, low RUP [EFLR]), and 6) 10% extruded flaxseed + 40% RUP (extruded flaxseed, high RUP [EFHR]). Ewes fed 10% extruded flaxseed exhibited higher (p < 0.001) dry matter intake (DMI) and colostrum yield (p < 0.1) compared to other treatments. Two types of flaxseed and RUP levels had no significant effect on milk yield, but milk fat and protein contents decreased and increased in diets containing 40% RUP, respectively. Ewes fed extruded flaxseed produced milk with lower concentrations of saturated fatty acids (SFA) and higher α-linolenic and linoleic acids and also polyunsaturated fatty acids (PUFA) compared to other groups (p < 0.05). During post-lambing, the ewes fed diets containing flaxseed exhibited higher concentration of serum non-esterified FAs (NEFA) compared to diets without flaxseed (p < 0.01). The concentration of serum β-hydroxybutyric acid (BHBA) decreased in the diets containing flaxseed types at pre-lambing, but increased in diets containing extruded flaxseed at post-lambing (p < 0.01). The serum glucose concentration of ewes (pre and post-lambing) which consumed diets containing extruded flaxseed or 40% RUP increased, but blood urea concentration was elevated following supplementation of diet with whole flaxseed or 40% RUP (p < 0.001). In conclusion, utilization of 10% extruded flaxseed in the diets of transition ewes had positive effects on animal performance with favorable changes in milk FAs profile. However, there is no considerable advantage to supply more than 20% RUP level in the diet of transition dairy sheep.

• 한국통신학회논문지
• /
• 제40권12호
• /
• pp.2461-2468
• /
• 2015

시누어스 안테나는 초 광대역을 요구하는 방향 탐지 시스템과 같은 응용에서 사용되는데, 안테나의 입력 임피던스가 높기 때문에 높이가 낮은 안테나 및 바룬의 설계에 애로점이 있다. 본 연구에서는 낮은 입력 임피던스를 얻기 위하여, Babinet's 원리를 이용하여, 2-18[GHz] 주파수 대역의 시누어스 안테나를 기존의 지수형 2-암 스트립 시누어스 안테나 대신에, 가장 큰 반경 $R_1=31.83mm$ 과 가장 작은 반경 $R_p=1.7mm$ 사이를 6개의 시누어스 셀을 균등한 등 간격으로 배치하는, 선형 2-암 슬롯 시누어스 안테나를 제안하고, 안테나 급전점에 $188{\Omega}$ 대신에 $80{\Omega}$의 임피던스로 급전 할 경우의 -10dB 대역폭을 해석하였다. 스트립인 경우 전 주파수 범위에서 반사 손실이 -10dB 이상이지만, 슬롯인 경우는 약 4-18[GHz] 범위에서 -10dB 이하의 반사 손실을 얻었다.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.1048-1062
• /
• 1999

A numerical method and experiments for the aerodynamic design of high performance two-stage axial flow fans was carried out. A vortex ring element method used for the aerodynamic analysis of the propellers was extended to the fan-duct system. Fan Performance and velocity profiles at the fan inlet and outlet are compared with experimental data for the validations of numerical method. Performance test was done based on KS B 6311(testing methods for turbo-fans and blowers). The velocity profile was obtained using a 5-hole pitot tube by the non-nulling method. The two stage axial flow fan configurations for the optimal operation conditions were set by using the experimental results for the single rotating axial flow fan and the single stage axial flow fan. The single rotating axial flow fan showed relatively low efficiency due to the swirl velocities behind rotor exit which produced pressure losses. In contrast, the single stage and the two-stage axial flow fans showed performance improvements due to the swirl velocity reduction by the stator. The peak efficiency of the two stage axial flow fan was improved by 21% and 6%, compared to the single rotating axial flow fan and the single stage axial flow fan, respectively.

• 한국지진공학회논문집
• /
• 제20권7_spc호
• /
• pp.527-536
• /
• 2016

This paper investigates seismic damage potential of recent September 12 M5.8 Gyeongju earthquake from diverse earthquake engineering perspectives using the accelerograms recorded at three stations near the epicenter. In time domain, strong motion durations are evaluated based on the accelerograms and compared with statistical averages of the ground motions with similar magnitude, epicentral distance and soil conditions, while Fourier analysis using FFT is performed to identify damaging frequency contents contained in the earthquake. Effective peak ground accelerations are evaluated from the calculated response spectra and compared with apparent peak ground accelerations and the design spectrum in KBC 2016. All these results are used to consistently explain the reason why most of seismic damage in the earthquake was concentrated on low-rise stiff buildings but not quite significant. In order to comparatively appraise the damage potential, the constant ductility spectrum constructed from the Gyeongju earthquake is compared with that of the well-known 1940 El Centro earthquake. Deconvolution analysis by using one accelerogram speculated to be recorded at a stiff soil site is also performed to estimate the soil profile conforming to the response spectrum characteristics. Finally, response history analysis for 39- and 61-story tall buildings is performed as a case study to explain significant building vibration felt on the upper floors of some tall buildings in Busan area during the Gyeongju earthquake. Seismic design and retrofit implications of M5.8 Gyeongju earthquake are summarized for further research efforts and improvements of relevant practice.

• 대한기계학회논문집A
• /
• 제39권11호
• /
• pp.1145-1151
• /
• 2015

항공기 및 엔진의 성능 극대화와 운용 유지비 최소화로 인하여 고압터빈 구성품은 점점 더 가혹한 환경에서 장시간 운용을 요구 받고 있다. 이를 해결하기 위해 냉각 극대화, 재료의 고급화, 코팅 기술 적용 등과 함께 재료 모델링, 유한요소해석, 통계적 기법 등의 수치적 해석 방법이 광범위하게 활용되고 있다. 본 연구에서는 일방향 응고 재료의 1 단 고압터빈 노즐의 운용 환경인 터빈 노즐 입구온도분포와 장착조건의 변화에 따른 노즐의 구조 건전성을 저주기 피로 수명을 통해 평가하고 가장 유리한 조건을 모색하고자 한다. 이를 위해 냉각 설계에 의한 노즐의 금속 온도 분포는 복합 열전달 해석을 통해 얻으며, 이를 근거로 탄소성 해석을 수행하고 그 결과를 기초로 저주기 피로 수명을 평가하였다.

• 한국전자파학회논문지
• /
• 제14권2호
• /
• pp.178-182
• /
• 2003

본 논문에서는 광대역 특성을 갖는 로딩 슬리브 모노폴의 구조를 이용하여 PCS 및 IMT-2000 대역에서 사용 가능하고, 안테나 전장이 현재 상용화되어 PCS 휴대용 단말기에 사용되고 있는 헤리컬 및 휩 결합형 안테나보다 짧은 로딩 슬리브 모노폴을 설계, 제작하였다. 설계, 제작한 로딩 슬리브 모노폴은 안테나 전장이 38 mm, 슬리브 부분의 직경은 8 mm이다. 제작한 안테나의 측정 결과는 PCS 및 IMT-2000주파수 대역인 1750 MHz~2170 MHz에서 VSWR은 1.5 이하이고, 이득은 3.5 dBi이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.25-32
• /
• 2005

The aerodynamic loads at the blade hub and the drive shaft for 1MW horizontal axis wind turbine are calculated numerically. The geometric shape of the blade such as chord length and twist angle can be obtained fran the aerodynamic optimization procedure. Various airfoil data, that is thick airfoils at hub side and thin airfoils at tip side, are distributed along the spanwise direction of the rotor blade. Under the wind data fulfilling design load cases based on the IEC61400-1, all of the shear forces, bending moments at the hub and the low speed shaft of the drive train are obtained by using the FAST code. It shows that shear forces and bending moments have a periodic. trend. These oscillating aerodynamic loads will lead to the fatigue problem at both of the hub and drive train From the load analysis the maximum shear forces and bending moments are generated when wind turbine generator system operates in the case of the extreme speed wind condition.

• 성인간호학회지
• /
• 제17권2호
• /
• pp.248-258
• /
• 2005

Purpose: The purpose of this study is to examine the factors influencing symptom experience in patients with liver cirrhosis(LC). Method: A descriptive correlational study design was used. A convenience sample of 129 subjects was recruited from the gastroenterology department at two university hospitals in Seoul, Korea. Symptom experience in LC was measured with the instrument developed by the researcher based on Theory of Unpleasant Symptoms(Lenz et al, 1995) and the Child-Pugh Score, the Korean version of Profile of Mood States, and the Family Support Questionnaire were used to identify the factors influencing symptom experience. Results: The mean score of symptom experience was relatively low(M=41.67, SD= 24.71). Among individual symptoms, fatigue had the highest score in all dimensions. Fatigue, abdominal distension and/or peripheral edema, muscle cramps, dry mouth, and change in appearance were explored as symptoms needing management. In the regression analysis, symptom experience was found to be influenced significantly by anxiety/depression($R^2=.418$, p=.000) and the severity of LC(Child-Pugh Score)($R^2=.125$, p=.000). These variables explained 54.3% of the variance in symptom experience(F=63.607. p=.000). Conclusion: It suggests that nurses need to take into consideration psychological factor as well as physiological factor in symptom management for patients with LC.