• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.79-80
• /
• 2006

From a viewpoint of heat stress at high temperatures and contact thermal resistance, it is confirmed that the optimal structure is the skeleton structure using Cu substrate on the cooling side, which has excellent heat conductivity and the optimal installation method is to adopt a carbon sheet and a mica sheet to the high temperature side, where Si grease is applied to the low temperature side, under pressurized condition. The power of the developed modules indicated 0.5W in an $FeSi_2$ module and 3.8 W with a SiGe module at 823K, respectively.

• 전력전자학회논문지
• /
• 제18권3호
• /
• pp.247-255
• /
• 2013

In this paper, a soft switching DC-DC converter for AC module type photovoltaic (PV) module integrated converter is proposed. A push-pull converter is suitable for a low voltage PV AC module system because the step-up ratio of a high frequency transformer is high and the number of primary side switches is relatively small. However, the conventional push-pull converters do not have high efficiency because of high switching losses by hard switching and transformer losses (copper and iron losses) by high turns-ratio of the transformer. In the proposed converter, primary side switches are turned on at zero voltage switching (ZCS) condition and turned off at zero current switching (ZVS) condition through parallel resonance between secondary leakage inductance of the transformer and a resonant capacitor. Therefore the proposed push-pull converter decreases the switching loss using soft switching of the primary switches. Also, the turns-ratio of the transformer can be reduced by half using a voltage-doubler of secondary side. The theoretical analysis of the proposed converter is verified by simulation and experimental results.

• 한국인터넷방송통신학회논문지
• /
• 제24권4호
• /
• pp.121-127
• /
• 2024

본 논문에서는 다중 위상배열 구조의 위성통신단말 송수신모듈 적용을 위한 핵심부품인 FEM(Front-End Module) MMIC를 구성품인 전력증폭기 (PA: Power Amplifier)와 저잡음증폭기 (LNA: Low Noise Amplifier)를 단일칩으로 설계하여 제작, 검증하였다. Win-semiconductors사의 화합물반도체 공정인 GaAs PP10 (100nm) 공정을 사용하여 제작하였으며, 전용 시험보드를 이용하여 운용 주파수 대역 7.2-10.5GHz 동작, 출력 1W, 잡음지수 1.5dB 이하의 특성을 확보하였다. 개발된 FEM MMIC는 단일칩으로도 활용이 가능하며, 구성품인 PA, LNA도 각각의 소자로도 활용이 가능하다. 개발된 소자는 해외 부품의 국산화 대체와 X대역을 사용하는 민수/군수의 다양한 응용분야에서 사용될 것이다.

• 한국컴퓨터정보학회논문지
• /
• 제11권2호
• /
• pp.1-6
• /
• 2006

본 논문에서는 CPLD를 고려한 RTL 바인딩과 저전력 기술 매핑 알고리즘에 대해 제안하였다. HDL로 기술된 회로에 대해 스케줄링을 수행한 후 모듈 연산 간격을 고려하여 합당한 모듈을 선택하여 할당을 수행한다. 할당을 수행한 후 회로를 구현할 CPID를 선택한다. 할당된 결과의 모듈을 CPLD 내부의 CLB의 맞도록 부울식을 분할하여야 한다. 이때 구현하고자 하는 CPLD를 구성하고 있는 CLB에 맞도록 저전력 기술 매핑 알고리즘을 수행하여 저전력의 회로를 구현할 수 있는 알고리즘을 제안하였다. 16비트 FIR 필터로 실험한 결과 알고리즘을 적용하기 전보다 작은 크기의 CPLD로 회로 구현이 가능하였으며, 가산기의 경우 알고리즘을 적용하지 않았을 때 내부 사용율은 8.45%이었으나 알고리즘 적용한 결과 61.88%로 내부 사용율이 증가되었다. 소모 전력에서도 알고리즘을 적용한 후 에 소모 전력이 약 43% 감소되는 결과를 나타내었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.74-76
• /
• 2007

In this paper a maximum power point tracking(MPPT) techniques for power of PV(photovoltaic) systems are presented using boost converter for a connected single phase inverter. On the basic principle of power generation for the PV module, algorithms for maximum power point tracking are described by utilizing a boost converter to adjust the output voltage of the PV module. Based on output power of a boost converter, single phase inverter uses predicted current control to control four IGBT's switch in full bridge. Furthermore a low cost control system for solar energy conversion using the DSP is developed, based on boost converter to adjust the output voltage of the PV module. The effectiveness of the proposed inverter system is confirmed experimentally and by means of simulation. Finally, experimental results confirm the superior performance of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2163-2164
• /
• 2006

It is desirable to monitor the vital signals, such as ECG, of a emergency patient during transfer in the hospital as well as in the ambulance. The purpose of this study is to develop a system which provides a real-time and wireless ECG to the medical staff nearby patient during transfer in hospital. In this context, we developed a low-power, low-cost and portable ECG system consisting of 1) ECG measurement and RF transmission module and 2) RF receiving and LCD display module. The developed system is expected to be useful in monitoring ECG of a patient during transfer in the hospital.

• 한국정보통신학회논문지
• /
• 제3권3호
• /
• pp.671-679
• /
• 1999

본 논문에서는 습도를 세어하기 위해 습도센서를 사용하여 습도를 측정 제습 입력값과 비례 제어를 위해 범용 $\mu$-processorPIC16C54와 Thermoelectric module을 사용하여 구현하였다. Pottier Module 모델에 따라 크기와 특성이 다양하고 Module의 종류에 따라 그에 따른 적절한 열저항을 유지할 수 있도록 하는 방열판 선택 또한 매우 중요한 설계 요소이다. 열전소자를 사용하여 전자제습기를 구현함으로써 국부공간의 무소음, 무진동, 저에너지 소모에 의한 효과적인 제습을 할 수 있음을 확인할 수 있었다.

• 정보통신설비학회논문지
• /
• 제8권1호
• /
• pp.24-29
• /
• 2009

In this paper, we show the implementation of the low-cost RF transceiver module for parking control system. Super regenerative receiver scheme was adopted for this module due to its simplicity, low-cost, low power consumption and small number of components to improve reliability of the systems. For improving communication error rate by collision and in-band noise, dual-channel hopping scheme was adopted. Testing prototypes under the environment of simultaneous transmissions, we verified that the designed scheme is able to improve the success rate of data transmission of wireless parking control system cost effectively.

• 수산해양기술연구
• /
• 제59권3호
• /
• pp.206-214
• /
• 2023

Fish school monitoring technology is utilized for various purposes, such as boat fishing and resource surveys. With advancements in information and communication technology, this technology has expanded its application to remote areas. Its significance has grown in fishing sites, particularly for improving the efficiency and cost-effectiveness of set-net fishing. Set-net fishing gears are not limited to coastal areas, but are also installed in inland and remote sea regions. Consequently, fishermen require technology that allows them to quickly transmit information about approaching fish schools and enables them to perform long-term monitoring. The development of remote monitoring technology for set-net fish schools must consider crucial design factors such as communication range, transmission speed, power consumption of information modules, and operational expenses. In this study, we developed a low-power remote monitoring module for set-net fish school based on WCDMA. The module was specifically designed to minimize power consumption, allowing for communication over long distances and extended operation times in set-net fishing applications. Furthermore, we developed a web server software application that enables remote access to fish schools and provides real-time weather information. The performance of the developed module was evaluated through set-net fishing site application and experiments with moving ships on the sea. The experimental results demonstrated that the remote monitoring system, consisting of the developed low-power remote monitoring module for set-net fish school based on WCDMA and a fish finder, had an average power consumption of 4.6 W, a maximum communication range of 22.84 km, and a data transmission and reception rate of 98.79%. The maximum fish school information transmission and reception rate was 97.26%

• 한국통신학회논문지
• /
• 제40권8호
• /
• pp.1606-1612
• /
• 2015

본 논문에서는 스마트폰에 장착 가능하고 휴대가 가능한 고효율 NDIR $CO_2$ 센서 모듈을 개발하였다. 저전력 회로 설계를 위하여 텅스텐램프 대신에 적외선 LED를 사용하였으며, 센서 모듈에 최적화된 광도파로를 설계 및 제작하였다. 스마트폰과 인터페이스가 가능한 회로를 통하여 스마트폰의 전원으로 센서 모듈이 구동되도록 설계하였다. $CO_2$ 농도, 온도 및 습도 등 측정된 센서의 데이터는 스마트폰 앱을 통하여 화면에 표시하였다. 측정 결과, 개발된 센서 모듈은 온도$-10^{\circ}C{\sim}50^{\circ}C$ 구간에서 0 ~ 3,000ppm 범위의 $CO_2$ 농도를 측정할 수 있었으며 측정 오차는 ${\pm}60ppm$이내였다.