• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.251-265
• /
• 2000

S $m_{2}$F $e_{17}$ $N_{x}$ film magnets using a S $m_{2}$F $e_{17}$ target were prepared at $N_{2}$ gas atmosphere using a Nd-YAG laser ablation technique. The effect of nitrogen pressure, deposition temperature, pulsation time and film thickness on the structure and magnetic properties of S $m_{2}$F $e_{17}$ $N_{x}$ film were studied. Increasing the nitrogen pressure up to 5 atm. was confirmed to lead the formation of complete S $m_{2}$F $e_{17}$ $N_{x}$ compound. Optimized magnetic properties with the nitrogenation temperature ranging over 500-53$0^{\circ}C$ could be obtained by extending the nitrogenation time up to 4 hours. Relatively low coercivities of 400~600 Oe were exhibited from the S $m_{2}$F $e_{17}$ $N_{x}$ films having the thickness of 50~100 nm while 4$\pi$ $M_{s}$ of 10~12 kG could be achieved. In-plane anisotropic characteristic, which was the basic goal in this study, was achieved by controlling the nitrogenation parameters.ameters.ers.ameters.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1065-1066
• /
• 2008

Printed thin-film transistors (TFTs) have received profound interests as an alternative to their silicon counterparts for use in fabricating next-Gen microelectronics by virtue of projected low manufacturing cost and certain salient features (e.g., thin and lightweight characteristics, structural flexibility, etc.) that printed TFTs bring to device architecture. The economic advantages stem from engaging low-cost printing techniques (e.g., screen printing, gravure, flexography, etc.) for deposition and patterning in place of traditionally costly high-vacuum, high-temperature photolithographic processes. To render printing TFTs possible, solution processable materials are necessary.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.158-162
• /
• 2003

The PVDF(polyvinylidene fluoride) film sensor as one of smart sensors has good characteristics to detect the impact damages of composite structures. The capabilities of the PVDF film sensor for evaluating impact behaviors and damages of Gr/Ep laminates subjected to low-velocity impact were examined. From sensor signals, the specific wave-forms implying the damage were detected. The wavelet transform(WT) and Short Time Fourier Transform(STFT) were used to decompose the piezoelectric sensor signals in this study. The impact behaviors of Gr/Ep laminates were simulated and the impact forces were reconstructed using the sensor signals. Finally, the impact damages were predicted by finite element analysis with the reconstructed forces. For experimental verification, a series of low-velocity impact tests from low energy to damage-induced energy were carried-out. The extent of damage in each case was examined by means of ultrasonic C-scan and the measured damage areas were agreed well with the predicted areas by the F.E.A.

• The Korean Journal of Food And Nutrition
• /
• v.22 no.4
• /
• pp.696-700
• /
• 2009

The adaptability of dry rehydratable film for the qualitative evaluation of coliform bacteria and Escherichia coli was tested. In general, culture methods that employ lactose broth or desoxycholate lactose agar are used for qualitative tests of coliform bacteria. Culture using lactose broth showed a high detection yield and low selectivity when compared to the dry rehydratable film. However, culture methods that employ lactose broth required a long time(48 hrs) for qualitative tests of coliform bacteria and complicated procedures were required to prepare the medium. The detection of coliforms using desoxycholate lactose agar had a slightly higher selectivity than the dry rehydratable film method, but this difference was not statistically significant. However, the preparation of the desoxycholate lactose agar was complicated. EC broth for the detection of E. coli showed the highest detection yield and lowest selectivity; however, this method required complicated procedures for preparation of the medium as well. Overall, the dry rehydratable film had a slightly lower detection yield than the other methods. The detection yield of dry rehydratable film method was over 37.1% at a concentration of 1 cfu/$m{\ell}$. Additionally, the dry rehydratable film method showed high selectivity and did not require preparation. However, because the selectivity of the dry rehydratable film was high, it took a long time(36 hrs) to detect E. coli. Overall, these findings indicate that dry rehydratable film can be used for qualitative detection of coliforms and E. coli.

• Electrical & Electronic Materials
• /
• v.20 no.5
• /
• pp.3-11
• /
• 2007

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.507-510
• /
• 2004

Oblique ion-induced secondary electron emission coefficient(${\gamma}$) with low energy ..and work function ${\phi}_{\omega}$(${\theta}$ = 0 and ${\theta}$ = 20) of the MgO thin film in AC-PDPs has been measured by ${\gamma}$-FIB system. The MgO thin film has been deposited from sintered material under electron beam evaporation method. The energy of $He^+$ ions used has been ranged from 50eV to 150eV. Oblique ion beam has been chosen to be 10 degree, 20 degree and 30 degree. It is found that the higher secondary electron emission coefficient(${\gamma}$) has been achieved by the higher oblique ion beam up to inclination angle of 30 degree than the perpendicular incident ion beam.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.59.2-59.2
• /
• 2015

Modification of film structure and properties in inductively-coupled plasma (ICP) assisted dc and pulsed dc sputtering has been reported by Oya and Kusano [1] and by Sakamoto, Kusano, and Matsuda [2], showing drastic changes in films structure and properties by the ICP assistance in particular to the pulsed dc discharge. Although mechanisms involved in the modification has been reported to be the increase in energy transferred to the substrate, details of effects of low-energy ion bombardment on the modification and origin of an anomalous increase in the ion quantity by the ICP assistance to the pulsed dc discharge have not been discussed. In this presentation, mechanisms involved in film structure and property modification in ICP assisted dc and pulsed dc sputtering, in which a number of low-energy ions are formed, will be discussed based on ion energy distribution as well as effectiveness of energy transfer to the substrate by low energy particles [3]. The results discussed in this presentation will emphasize the fact that the energetic particles playing an important role in the film structure modification are those to be deposited, but not those of inert gas, when their energies range in less than 100 eV in the pressure range of magnetron sputtering.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.364.2-364.2
• /
• 2014

Magnesium oxide (MgO) thin films have attracted great scientific and technological interest in recent decades. Because of its distinguished properties such as a wide band gap (7.2 eV), a low dielectric constant (9.8), a low refractive index, an excellent chemical, and thermal stability (melting point=$2900^{\circ}C$), it is widely used as inorganic material in diverse areas such as fire resistant construction materials, optical materials, protective layers in plasma display panels, buffer layers of multilayer electronic/photonic devices, and perovskite ferroelectric thin films. Precursor used in the ALD requires volatility, stability, and low deposition temperature. Precursors using a heteroleptic ligands with different reactivity have advantage of selective reaction of the heteroleptic ligands on substrate during ALD process. In this study, we have synethesized new heteroleptic magnesium precursors ${\beta}$-diketonate and aminoalkoxide which have been widely used for the development of precursor because of the excellent volatility, chelating effects by increasing the coordination number of the metal, and advantages to synthesize a single precursor. A newly-synthesized Mg(II) precursor was adopted for growing MgO thin films using ALD.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.194-197
• /
• 2002

Applying dual layer insulator on plastic substrates improved electrical characteristics of organic thin film transistor(TFT). A high-quality silicon dioxide(SiO$_2$) suitable for a insulator was deposited on plastic substrates by e-beam evaporation at 110$^{\circ}C$. The insulator film which was treated by N$_2$ annealing at 150$^{\circ}C$ showed excellent I-V, C-V characteristics. The dual layer insulator structure of polyimide-SiO$_2$ improved the roughness of SiO$_2$ surface and showed very low leakage current. In addition, the flat band voltage has been reduced from -2.5V to about 0.5V.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.4
• /
• pp.338-342
• /
• 2010

Carbon nanotubes (CNTs) have excellent electrical, chemical stability, mechanical and thermal properties. The MWCNT films were investigated as a transparent electrode for the solar cell, OLED, and field-emission display. MWCNT films were fabricated by air spray method, whose process is quite low-costed, using the multi-walled CNTs solution on glass substrates. Moreover, the most stable film was fabricated when the spraying time was 60 sec. The film that was sprayed with the MWCNT dispersion for 60 sec, has 300nm thick. And its electric resistivity, transmittance rate, mobility and carrier concentration are $6{\times}10^{-2}{\Omega}{\cdot}cm$, 50% at ${\lambda}=550mm$, $4.3{\times}10^{-2}cm^2/V{\cdot}s$ and $2.1{\times}10^{21}cm^{-3}$, respectively. Also, absorption energy of MWCNT films show from 3.9 eV to 4.6 eV. Furthermore, we can use MWCNT films fabricated by the spray method for the transparent electrode.