• 한국염색가공학회지
• /
• 제21권5호
• /
• pp.27-34
• /
• 2009

PET fabric was dyed in black shade with disperse dyes of three primary color. The effect of combination ratio of dye concentration and energy type of disperse dye on dyeing and color property of black dyed PET fabric was investigated. Dyeing compatibility of disperse dyes of three primary color on PET was evaluated by comparison of dyeing rates of them. From the results, color property was dependent upon the combination ratio of dye concentration. In order to obtain low lightness ($L^*$) and black color, blue dye should be added enough. S-type disperse dye and $130^{\circ}C$ dyeing was suitable rather than SE-type dyes or $120^{\circ}C$ dyeing. Disperse dyes of three primary color used showed good dyeing compatibility at high dye concentration. Washfastness was fair to moderate and lightfastness was moderate.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.484.2-484.2
• /
• 2014

There are many efforts to improving the power conversion efficiencies (PCEs) of dye-sensitized solar cells (DSCs). Although DSCs have a low production cost, their low PCE and low thermal stability have limited commercial applications. This study describes the preparation of a novel multifunctional polymer gel electrolyte in which a cross-linking polymerization reaction is used to encapsulate $TiO_2$ nanoparticles toward improving the power conversion efficiency and long-term stability of a quasi-solid state DSC. A series of liquid junction dye-sensitized solar cells (DSCs) was fabricated based on polymer membrane encapsulated dye-sensitized $TiO_2$ nanoparticles, prepared using a surface-induced cross-linking polymerization reaction, to investigate the dependence of the solar cell performance on the encapsulating membrane layer thickness. The ion conductivity decreased as the membrane thickness increased; however, the long term-stability of the devices improved with increasing membrane thickness. Nanoparticles encapsulated in a thick membrane (ca. 37 nm), obtained using a 90 min polymerization time, exhibited excellent pore filling among $TiO_2$ particles. This nanoparticle layer was used to fabricate a thin-layered, quasi-solid state DSC. The thick membrane prevented short-circuit paths from forming between the counter and the $TiO_2$ electrode, thereby reducing the minimum necessary electrode separation distance. The quasi-solid state DSC yielded a high power conversion efficiency (7.6/8.1%) and excellent stability during heating at $65^{\circ}C$ over 30 days. These performance characteristics were superior to those obtained from a conventional DSC (7.5/3.5%) prepared using a $TiO_2$ active layer with the same thickness. The reduced electrode separation distance shortened the charge transport pathways, which compensated for the reduced ion conductivity in the polymer gel electrolyte. Excellent pore filling on the $TiO_2$ particles minimized the exposure of the dye to the liquid and reduced dye detachment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.147-148
• /
• 2007

Dye-sensitized solar cell using conversion of solar energy to electrical energy appeared that which solves a environmental matter. The dye-sensitized solar cell uses nano-crystalline oxide semiconductor for absorbing dye. The $TiO_2$ is used most plentifully. The efficiency of the dye-sensitized solar cell changes consequently in the particle size, morphology, crystallization and surface state of the $TiO_2$. In this paper, we report The effect of titania$(TiO_2)$ thickness on the performance of dye-sensitized solar cells. Using doctor blade method, It produced the thickness of the $TiO_2$ with $7\;{\mu}m,\;10\;{\mu}m,\;13\;{\mu}m$. The efficiency was the best from $10{\mu}m$. It had relatively low efficiency on the thickness from $7\;{\mu}m\;to\;13\;{\mu}m$. The reason why it presents low efficiency on $7\;{\mu}m$ thickness is that excited electrons can not be delivered enough due to thin thickness of $7\;{\mu}m\;TiO_2$. And The reason why it presents low efficiency on $13\;{\mu}m$ thickness is that thick $13\;{\mu}m\;TiO_2$ can not penetrate the sunlight enough.

• Fibers and Polymers
• /
• 제6권3호
• /
• pp.224-228
• /
• 2005

This paper focuses on the application of a novel mathematical limit approach derived for K/S values in reactive dyeing of cotton fabrics. The relation obtained from Kubelka-Munk equation is used because the Kubelka-Munk equation is the basic relationship among fabric reflectance, fabric dye content and dyestuff characteristics. The limit approach derived in a former paper is applied to the laboratory dyeings and the dyeing behavior of some reactive dyes on cotton knitted fabric has been obtained. The results of the laboratory experiments are discussed using the new mathematical approach. When the actual K/S values obtained from the dyeings and the calculated K/S values derived by the limit approach are considered independently, it is observed that the limit relation is val id for low dye concentration applications. When the K/S values are calculated taking the K/S value of the initial dyeing concentration $(0.1\;\%\;owf)$ as the starting concentration by applying the result of the derived limit approach, the calculated K/S values fit with the ones obtained in actual dyeings. It is concluded that the novel approach presented in the paper can be used in calculating the K/S values when the initial dyeings at low dye concentrations are carefully carried out.

• 한국염색가공학회지
• /
• 제32권2호
• /
• pp.89-95
• /
• 2020

In this study, the efficacy of Amaranth(Amaranthus spp. L.) as a natural dye resource was investigated for wool fabrics. It is known that a large amount of flavonoid and anthocyanin colorant are contained in leaves and stems, as well as red flowers. The optimum condition of dyeing was 1.3% of dye concentration(o.w.b.) at 100℃ for 60 minutes, resulting the K/S value, 23.43 and R Munsell color on the wool fabrics. Al, Fe, Zinc and Titanium were used as a mordant. The mordant improved the dye uptake, regardless of the mordant type and mordant method. The pre-mordanting method was more effective than the post-mordanting method. Al pre-mordanted fabric showed the highest K/S, 30.02. Light fastness and washing fastness were high in grades 4-5 and 5, and rubbing fastness was good in grades 4 and 4-5 in dry condition, but low in grades 2-3 and 3 in wet condition. The dry cleaning fastness was excellent in all 5 grades. However, the alkaline perspiration fastness ratings were low in grades 2-3 and 3. The results show Amaranthus spp. L. colorant can be used as a functional natural dye for wool fabrics.

• 한국전기전자재료학회논문지
• /
• 제17권10호
• /
• pp.1090-1094
• /
• 2004

Studies on porous oxide electrode, dye and electrolyte for dye-sensitized solar cells have been intensively carried out until now. However, counter electrode have not been much studied so far. Accordingly, it is needed to investigate new counter electrode materials with superior catalyst property and to substitute for Pt electrode. In this case, carbon nano-tubes (CNTs) are one of alternatives for counter electrodes as following merits: low resistivity, excellent electron emission property, large surface area and low cost due to development of mass production technique. Such advantages gave us to select multiwalled CNTs (MWCNT) as counter electrode for dye-sensitized solar cell. Also, cyclic voltammetry and impedance spectroscopy were used to investigate electrochemical properties of both CNT electrode and Pt electrode. It was found that sheet resistance of CNT electrode was similar to that of Pt electrode, also, electrochemical properties of CNT electrode was superior to that of Pt electrode on the basis on the measurement of CV and impedance spectrum. It was found that CNT is likely to be a very promising electrode material for dye solar cells.

• 한국의류산업학회지
• /
• 제14권4호
• /
• pp.669-676
• /
• 2012

This study aims to compare the properties of natural dye stuffs, such as color, dyeability, fastness, and marketability, to analyze the differences noted by expert groups regarding the properties of the stuffs, and to make a positioning of the stuffs. A survey of experts in academia, business, and the art of natural dyeing was conducted, with an evaluation of 23 types of the stuff's properties. There is a correlation between the properties of the stuffs, and evaluating dye stuffs differs according to the group to which it belongs. X-axis relates to color and Y-axis refers to fastness in the positioning of the stuff. There are different relationships between properties according to their group. Color is significantly associated with marketability in art experts however, fastness is closely connected with marketability in business. The stuffs can be divided into five clusters. Cluster I includes indigo and persimmon, and is marked by excellent color, dyeability, fastness, and marketability, Cluster II contains safflower and sappan wood, which are excellent colors, yet suffer from low marketability on account of their medium to low fastness. Cluster III includes red, purple, and brown dyes, and onion and rhubarb, and has medium properties. Cluster IV is mugwort and yellow dyes, except onion and rhubarb, and features low properties. Cluster V is loess, featuring medium color and low fastness.

• Advances in environmental research
• /
• 제6권1호
• /
• pp.1-14
• /
• 2017

New technologies or improvement of the existing technologies are required to enhance the efficiency of removal of pollutants from wastewater. In this study we attempted to produce and test the activated carbon produced from the refused tea waste for the removal of dyes from wastewater. The objectives of this investigation were to produce activated carbon from refused tea waste by chemical activation, evaluate its performance for the removal of color produced from Acid Yellow 36, and the modeling of its dye removal with the kinetic study. The activation was performed in two steps namely carbonization at $375{\pm}25^{\circ}C$ and chemical activation with HCl at $800^{\circ}C$ under the absence of Oxygen. Adsorption isotherms and kinetic studies were performed with a textile dye, Acid Yellow 36, at different concentrations (20-80 mg/L). The maximum dye removal (~90%) observed at 80 mg/L dye concentration and it reduced at low dye concentrations. Maximum adsorption (71.97 mg/g) was recorded at 96 h at $29{\pm}1^{\circ}C$. Low pH increased the dye adsorption (pH=2; 78.27 mg/g) while adsorption reduced at high pH levels indicating that the competition occurs in between OH- ions and AY36 molecules for the adsorption sites in RTAC. The Langmuir isotherm model clearly explained the dye adsorption, favorably, by RTAC. Moreover, kinetic studied performed showed that the pseudo second order kinetic model clearly describes the dye adsorption. Based on the results obtained in this study, it can be concluded that RTAC can be used for the removal of textile dyes.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제39차 학술발표회
• /
• pp.13-14
• /
• 2008

In black dyeing of PET fabric, high concentrations of disperse dyes of three primary color are generally used, which leads low exhaustion level of dye and discharge of a large amount of unfixed dye into dyehouse effluent. In this study, the effect of combination ratio of dye concentration, liquor ratio, and dyeing pH on dyeing and color property of black dyed PET fabric was investigated.

• Toxicological Research
• /
• 제13권1_2호
• /
• pp.161-165
• /
• 1997

This study was conducted to investigate the skin irritation by transdermal administration of the three dyes. These dyes were originated from onion by using extraction method. By the order of extraction from onion, A-dye was obtained from onion by using water at 90-100$\circ$C. B-dye was extracted from A-dye with ethylacetate. After ethylacetate extraction from A-dye, the lower layer named as C-dye. Twenty-four New Zealand white rabbits were divided into three groups. The each groups was consisted of two subgroups according to high dose (extracted dyes) and low dose (the 100-fold dilutions of A-, Band C-dye). In primary skin irritation test of male New Zealand White rabbits, body temperature and weights were not significantly changed and blood cells were positioned in normal blood cell ranges of health rabbits. Primary irritation index was "0" in the test and control sites of all animals used in this study. By the results obtained in the present test, all dyes were evaluated as a non-irritant on the basis of the criteria of Draize.of Draize.