• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.397-401
• /
• 1991

Low frequency oscillations have been observed in KEPCO system. This paper represents how to analyze the power system by using the AESOPS program and analyze the various factors affecting the damping characteristics of these oscillations in KEPCO system of 1986. The characteristics of load, the amount of power flow on the transmission line and the gain of exciter have a significant effects on the damping of the system while the governing system has only a minor one. With the Power System Stabilizers, the stability of the power system has been increased.

• Journal of Power System Engineering
• /
• v.3 no.3
• /
• pp.91-96
• /
• 1999

This study is about the design and analysis ot a suspension damper for truck driver's seat to improve the ride comfort. Trucks are usually subjected to hostile driving environments. Therefore, many truck driver's seat have suspension seats to isolate the vibration from the cab floor panel. Because the vehicle suspension system can reduce the primary vibration from the ground, only low frequency vibration can be transmitted to the driver's seat. But, this low frequency vibration can be harmful to the driver. The seat damper is very critical element to improve the ride comfort for the driver. In this study, a four-stage damper is designed and analyzed for the vibration capability. The damping coefficient of this damper can lie manually controlled in response to the road and driving environment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.113-119
• /
• 1991

In the present study, a methodology has been established for water budget analysis of a river basin for which monthyl rainfall and evaporation data are the only available hydrologic data. The monthly rainfall data were first converted into monthyl runoff data by an empirical formula from which long-term runoff data were generated by a stochastic generation mothod. Thomas-Fiering model. Based on the generated long-term data low flow frequency analysis was made for each of the oberved and generated data set, the low flow series of each data set being taken as the water supply for budget analysis. The water demands for various water utilization were projected according to the standard method and the net water consumption computed there of. With the runoff series of the driest year of each generated data set as an input water budget computation was made through the composite reservoirs comprised of small reserviors existing in the basin by deficit-supply method. The water deficit computed through the reservior operation study showed that the deficit radically increases as the return period of low flow becomes large. This indicates that the long-term runoff data generated by stochastic model are a necessity for a reliable water shortage forecasting to cope with the long-term water resourse planning of a river basin. F.E.M. program (ADINA) is also presented herein.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.159-165
• /
• 2008

A sirocco fan is widely used for discharging pollutants of a kitchen space since it is able to generate a relatively high air flow rate considering its small size and makes less noise than a axial fan or a centrifugal fan. However, it has a problem because its efficiency is low, and power consumption is larger. Performance of a sirocco fan is influenced by various factors such as number of the fan blades, diameter of the fan, geometry of the fan, geometry of its housing, revolution frequency, static pressure condition, and etc. This research investigated the effect on the performance of geometry of the housing. For CFD analysis, we used a commercial code, SC/Tetra, and used a sliding mesh method to give the same condition as an actual state. Verification of the CFD results is done by comparison of experimental data and numerical one about the suction flow rate, and it is confirmed that two results are well consistent. After we changed the shape of housing according to Archimedes' screw, we observed that suction efficiency is improved by 10.7% maximum.

• Journal of Korea Water Resources Association
• /
• v.43 no.4
• /
• pp.325-336
• /
• 2010

This study presents the alteration of flow regime by effects of dams and water use in the Geum River Basin. The surface water use rate and the Impounded Runoff (IR) index were examined to assess the pressure indicators of the flow alteration. We applied the flow duration curve, flow regime coefficient, flood and low-flow frequency analysis as well as Range of Variability Approach (RVA) to investigate the quantitative changes in natural flow regimes. The results indicate that the high flow decreased and low flow increased respectively compared to the natural flow regimes at eight gauging stations. The Geum river is regulated by 139 dams and reservoirs storing 24% of the annual mean discharge and has high surface water use rate of 36%. These indicators are main pressure factors to alter flow regimes.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.2
• /
• pp.96-111
• /
• 2012

Hull Mounted Sonar (HMS) is a long range submerged vehicle's hull-mounted passive sonar system which detects low-frequency noise caused by machineries of enemy ships or submerged vehicles. The HMS needs a sound absorption /insulation multi-layer structure to shut out the self-noise from own machineries and to amplify signals from outside. Therefore, acoustic analysis of the multi-layer system should be performed when the HMS is designed. This paper simplified the HMS multi-layer system to be an infinite planar multi-layer model. Also, main excitations that influence the HMS were classified into mechanical, plane wave and turbulent flow excitation, and the investigations for each excitation were performed for various models. Stiffened multi-layer analysis for mechanical excitation and general multi-layer analysis for turbulent flow excitation were developed. The infinite planar multi-layer analysis was expected to be more useful for preliminary design stage of HMS system than the infinite cylindrical model because of short analysis time and easiness of parameter study.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2907-2912
• /
• 2007

The cooling water system for the PEFP 20 MeV proton accelerator was established and tested to obtain the precise resonance frequency of DTL through the temperature control of cooling water. The water temperature in the main flow loop was manipulated by adjusting the proportion of hot water returning from the DTL structures through the heat exchanger loop. Due to low duty factor operation and insufficient cooling loop installation of the DTL tanks, the manual mode operation was applied to maintain the DTL temperatures close to their resonance temperatures. The optimized process conditions with flow balancing and pressure drop in the DTL cooling systems are reported.

• Macromolecular Research
• /
• v.9 no.3
• /
• pp.164-170
• /
• 2001

Recently in order to describe the complex rheological behavior of polymer melts with long side branches like low density polyethylene, new constitutive equations called the pom-pom equations have been derived by McLeish and Larson on the basis of the reptation dynamics with simplified branch structure taken into account. In this study mathematical stability analysis under short and high frequency wave disturbances has been performed for the simplified differential version of these constitutive equations. It is proved that they are globally Hadamard stable except for the case of maximum constant backbone stretch (λ = q) with arm withdrawal s$\_$c/ neglected, as long as the orientation tensor remains positive definite or the smooth strain history in the now is previously given. However this model is dissipative unstable, since the steady shear How curves exhibit non-monotonic dependence on shear rate. This type of instability corresponds to the nonlinear instability in simple shear flow under finite amplitude disturbances. Additionally in the flow regime of creep shear flow where the applied constant shear stress exceeds the maximum achievable value in the steady now curves, the constitutive equations will possibly violate the positive definiteness of the orientation tensor and thus become Hadamard unstable.

• Korean Institute of Interior Design Journal
• /
• v.22 no.6
• /
• pp.108-118
• /
• 2013

This study has analyzed the process of space information perceived and recognized through the estimation of observation frequency and number according to the time range of observation data acquired from observation experiment with the object of hospital lobby. The followings are the results analyzed at this study. First, the continual observation of 3 and 6 times was attentive and conscious for probing to find an object rather than for acquiring exact information and that of 9 times could be regarded as the time for acquiring visual appreciation. However, the repetitive occurrence of high and low frequencies can be thought of repetitive acts for visual appreciation. Second, the continual observation of 3 and 6 times had the highest observation frequency of II, while that of 9 times had the highest observation frequency of III. In case of 3 and 6 times, the observation frequency had the tendency to become a little higher after being low since V, and in case of 9 times it had the repetition of becoming low and high and from IX it characteristically got higher. This feature can be thought to be the process that the subject repeats the fixation and movement of observation at a visual activity for perception and recognition. In the process of first observation, the observation frequency was the highest after 20 seconds or so, but since then, it gets lower and repeatedly gets higher and lower as time passes. After 90 seconds, the frequency showed the tendency of getting higher continuously. Third, the examination of changing features of frequency may show the characteristics of exploration for and attention to space but if the observation frequency is not associated with observation times for analysis there will a limitation that the features of observation frequency cannot be clarified. Accordingly, the simultaneous analysis of both is very effective for estimating the observation characteristics seen at the processes of perception and recognition. Fourth, the general analysis of the both revealed: with the progress of observation time the discontinuous space exploration decreased, and as the observation time got longer the fixed attention to a specific spot increased. Fifth, in order to estimate the observation characteristics by the change of time range the observation frequency and times by trend line was analyzed, which approach seems to be an appropriate technique that can comprehensively show the overall flow of time series data.

• Journal of KSNVE
• /
• v.1 no.1
• /
• pp.29-38
• /
• 1991

The performance of silencer system is controlled by the geometrical parameters such as the relative location of inlet and outlet ports, size of main chamber, and cross sectional geometry of inlet-outlet ports and main chamber of silencer. In addition to these parameters, the presence of mean flow and temperature gradient along the silencer also affects the acoustic characteristics of silencer system. Due to the complexity of silencer, it is not straight forward to design the appropriate silencer system. In this paper, a design methodology based on an oustic analysis of silencer system is proposed ; low frequency and high frequency tuning method.