• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.576-583
• /
• 2015

This paper aims to investigate the potential use of cempedak durian peel (CDP) from Negara Brunei Darussalam, which is low-cost, locally available, eco-friendly and highly efficient to remove methyl violet (MV) dye from aqueous solutions. The time required for equilibrium to be reached is 2.0 h with no adjustment of pH necessary. FTIR analysis was indicative of the involvement of -COOH and C=O functional groups in adsorption process. The Langmuir model provided the best fit with maximum adsorption capacity of $0.606mmol\;g^{-1}$. Thermodynamics data indicate that the adsorption is spontaneous, feasible and endothermic in nature. Best regeneration of CDP's adsorption ability is achieved by base solution, showing about 95% removal efficiency of MV even after 5 cycles, indicating that CDP can be regenerated and reused. This, together with its high adsorption capacity, makes CDP a potential adsorbent for the removal of MV in wastewater.

• Environmental Engineering Research
• /
• v.17 no.3
• /
• pp.125-132
• /
• 2012

The removal of Cd(II) and Cu(II) from aqueous solution by an agricultural solid waste biomass prepared from Moringa oleifera bark (MOB) was investigated. The biosorbent was characterized by Fourier transform infrared spectroscopy and elemental analysis. Furthermore, the effect of initial pH, contact time, biosorbent dosage, initial metal ion concentration and temperature on the biosorption of Cd(II) and Cu(II) were studied using the batch sorption technique. Kinetic studies indicated that the biosorption process of the metal ions followed the pseudo-second order model. The biosorption data was analyzed by the Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherm models. Based on the Langmuir isotherm, the maximum biosorption capacities for Cd(II) and Cu(II) onto MOB were 39.41 and 36.59 mg/g at 323 K, respectively. The thermodynamic parameters, Gibbs free energy (${\Delta}G^o$), enthalpy (${\Delta}H^o$), and entropy (${\Delta}S^o$) changes, were also calculated, and the values indicated that the biosorption process was endothermic, spontaneous and feasible in the temperature range of 303-323 K. It was concluded that MOB powder can be used as an effective, low cost, and environmentally friendly biosorbent for the removal of Cd(II) and Cu(II) ions from aqueous solution.

• Clean Technology
• /
• v.13 no.3
• /
• pp.215-221
• /
• 2007

Biosorption is considered to be a promising alternative to replace the present methods for the treatment of dye-containing wastewater. In this study, sewage sludge was used as a biosorbent which could be one of the cheapest and most abundant biomaterials. The objective of this work is to develop a surface-modified biosorbent with enhanced sorption capacity and binding affinity. The FT-IR and potentiometric titration studies revealed that carboxyl, phosphateand amine groups played a role in binding of dye molecules. The binding sites for reactive dye Reactive Red 4 (RR 4) were identified to be amino groups present in the biomass. In this work, based on the biosorption mechanism, the performance of biosorbentcould be enhanced by the removal of inhibitory carboxyl groups from the biomass for practical application of the biosorbents. As a result, the maximum capacity of biomass was increased up to 130% and 210% of the increment of sorption capacity at pH 2 and 4, respectively. Therefore, chemically modified sewage sludge can be used as an effective and low-cost biosorbent for the removal of dyes from industrial discharges.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.2
• /
• pp.38-43
• /
• 2014

In this study, we evaluated the methylene blue (MB) adsorption potential of non-treated and UV-C pretreated bacterial biomass from aqueous solution. The UV-C pretreatment denature the biomass and has increased overall functional groups when compared to non-treated biomass. The biosorbent was exposed to various pH, biomass dose, and contact time. The results showed that the dried and UV-C pretreated biomass effectively removed MB within 30 min. Dried and UV-C pretreated biomass of Bacillus pseudomycoides JH 2-2 showed a adsorption of 858.2 and 1072.4 mg/g at optimum conditions (pH: 9.0, contact time: 30 min, biomass dose: 1 g/L). Similarly, dried and UV-C pretreated biomass of Citrobacter freundii JH 11-2 showed an adsorption 868.3 and 954 mg/g at optimum conditions (pH: 9.0, contact time: 10 min, biomass dose: 1.5 g/L). The changes in the functional groups of UV-C pretreated biomass could be responsible for enhanced adsorption of MB. The results obtained have shown that non-treated and UV-C pretreated biomass has a high adsorption capacity for MB dye and can be used as a low-cost biosorbent in wastewater treatments.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.158-164
• /
• 2009

Biosorption uses adsorbents derived from non-living biomass and removes toxic metals from industrial wastewater. The objective of this research was to evaluate the potential of low cost biosorbents to remove heavy metal ions (Cd, Cu, Pb and Zn) from aqueous solutions using chemically modified rice husk and saw dust (Pseudotsuga menziesi, Quercus, Populus). Batch-type adsorption experiments were carried out using rice husk and saw dust treated with NaOH and/or tartaric acid in artificial wastewater 100 mg metal/L). The experimental results showed that the adsorption specificity of each biosorbent was Pb > Cu > Cd > Zn irrespective of the types of biosorbents. The adsorption capacity of Pb and Cu onto NaOH-treated sawdust was increased 2${\sim}$3 times compared to the untreated one. In addition, the tartaric acid treatment increased the adsorption capacity of rice husk for Zn and Cd approximately 5${\sim}$10 fold compared to the untreated one. Surface conditions and changes in functional groups by chemical modification of each biosorbent were confirmed by SEM and FT-IR. Overall, the results show that chemical modification increases the metal removal capacity of rice bran and sawdust.

• Journal of Environmental Science International
• /
• v.27 no.9
• /
• pp.743-751
• /
• 2018

The objective of this study was to investigate the adsorption potential of chicken feathers for the removal of OrangeII (AO7) from aqueous solutions. Batch experiments were performed as a function of different experimental parameters such as initial pH, reaction time, feather dose, initial OrangeII concentration and temperature. The highest OrangeII uptake was observed at pH 1.0. Most of the OrangeII was adsorbed at 2 h and an adsorption equilibrium was reached at 6 h. As the amount of chicken feather was increased, the removal efficiency of OrangeII increased up to 99%, but its uptake decreased. By increasing the initial concentration and temperature, OrangeII uptake was increased. The experimental adsorption isotherm exhibited a better fit with the Langmuir isotherm than with the Freundlich isotherm, and maximum adsorption capacity from the Langmuir constant was determined to be 0.179244 mmol/g at $30^{\circ}C$. The adsorption energy obtained from the Dubinin-Radushkevich model was 7.9 kJ/mol at $20^{\circ}C$ and $30^{\circ}C$ which indicates the predominance of physical adsorption. Thermodynamic parameters such as ${\Delta}G^0$, ${\Delta}H^0$, and ${\Delta}S^0$ were -12.28 kJ/mol, 20.64 kJ/mol and 112.32 J/mol K at $30^{\circ}C$, respectively. This indicates that the process of OrangeII adsorption by chicken feathers was spontaneous and endothermic. Our results suggest that as a low-cost biomaterials, chicken feather is an attractive candidate for OrangeII removal from aqueous solutions.