• New & Renewable Energy
• /
• v.1 no.1 s.1
• /
• pp.37-43
• /
• 2005

High-efficiency silicon solar cells have potential applications on mobile electronics and electrical vehicles. The fabrication processes of the high efficiency cells necessitate com placated fabrication precesses and expensive materials. Ti/Pd/Ag metal contact has been used only for limited area In spite of good stability and low contact resistance because of Its expensive material cost and precesses. Screen printed contact formed by Ag paste causes a low fill factor and a high shading loss of commercial solar cells because of high contact resistance and a low aspect ratio. Low cost Ni/Cu metal contact has been formed by using a low cost electroless and electroplating. Nickel silicide formation at the interface enhances stability and reduces the contact resistance resulting In an energy conversion efficiency of $20.2\%\;on\;0.50{\Omega}cm$ FZ wafer. Tapered contact structure has been applied to large area solar cells with $6.7\times6.7cm^2$ in order to reduce power losses by the front contact The tapered front metal contact Is easily formed by the electroplating technique producing $45cm^2$ solar cells with an efficiency of $21.4\%$ on $21.4\%\;on\;2{\Omega}cm$ FZ wafer.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.4
• /
• pp.360-369
• /
• 2012

The main purpose of this study is to analyse economic feasibility of low-carbon-oriented trawl gear. The results of benefit/cost analysis showed that use of the low-carbon fishing gear is economically feasible. Considering the fuel saving and relatively low $CO_2$ emission by reducing the resistance of gear, net present value by such gear improvement was estimated about 2,430~2,853 million won with the benefit-cost ratio 1.65~1.84 and the internal rate of return 29.18~30.48 percent. Development of low-carbon trawl gear would render significant contributions to reducing $CO_2$ emission in fishing operations and lead to reduce fishing costs due to fuel savings.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.689-709
• /
• 2010

In this paper, a low cost, low power but multifunctional wireless sensor node is presented for the impedance-based SHM using piezoelectric sensors. Firstly, a miniaturized impedance measuring chip device is utilized for low cost and low power structural excitation/sensing. Then, structural damage detection/sensor self-diagnosis algorithms are embedded on the on-board microcontroller. This sensor node uses the power harvested from the solar energy to measure and analyze the impedance data. Simultaneously it monitors temperature on the structure near the piezoelectric sensor and battery power consumption. The wireless sensor node is based on the TinyOS platform for operation, and users can take MATLAB$^{(R)}$ interface for the control of the sensor node through serial communication. In order to validate the performance of this multifunctional wireless impedance sensor node, a series of experimental studies have been carried out for detecting loose bolts and crack damages on lab-scale steel structural members as well as on real steel bridge and building structures. It has been found that the proposed sensor nodes can be effectively used for local wireless health monitoring of structural components and for constructing a low-cost and multifunctional SHM system as "place and forget" wireless sensors.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.1
• /
• pp.103-112
• /
• 2015

In this study, a study was carried out to see what influence low-cost carrier's e-service quality has on low-cost carrier customers' perceived value and customer satisfaction and what impact the results have on customer loyalty based on the results of previous studies related to e-SERVQUAL, an e-SERVQUAL measurement model for general e-commerce. In addition, a survey of consumers who have experienced using low-cost carrier experience through web sites was conducted. For the analysis of the data collected, SPSS 18.0 was used to conduct frequency analysis, factor analysis, reliability analysis, correlation analysis, and regression analysis and thus to test a hypothesis. Research findings showed that perceived value and customer satisfaction are closely related to customer loyalty, and it was also observed that the reliability factor on the service provided on the web site acts as an important influencing factor for customer loyalty in the perceived value and security factors such as payment by credit cards and protection of personal information serve as important one in terms of customer satisfaction. This study has its limitation in that samples of users who have experienced low-cost carrier are concentrated on specific ages and professions. In the future, it is required to conduct further studies on whether difference is made on the importance of measurement factors related to e-service quality by gender, age group, occupation, and e-service quality.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.7
• /
• pp.637-648
• /
• 2007

This paper presents a sensor fusion method based on indirect Kalman filter(IKF) for error compensation of low-cost inertial sensors and its application to the determination of attitude and position of small flying robots. First, the analysis of the measurement error characteristics to zero input is performed, focusing on the bias due to the temperature variation, to derive a simple nonlinear bias model of low-cost inertial sensors. Moreover, from the experimental results that the coefficients of this bias model possess non-deterministic (stochastic) uncertainties, the bias of low-cost inertial sensors is characterized as consisting of both deterministic and stochastic bias terms. Then, IKF is derived to improve long term stability dominated by the stochastic bias error, fusing low-cost inertial sensor measurements compensated by the deterministic bias model with non-inertial sensor measurement. In addition, in case of using intermittent non-inertial sensor measurements due to the unreliable data link, the upper and lower bounds of the state estimation error covariance matrix of discrete-time IKF are analyzed by solving stochastic algebraic Riccati equation and it is shown that they are dependant on the throughput of the data link and sampling period. To evaluate the performance of proposed method, experimental results of IKF for the attitude determination of a small flying robot are presented in comparison with that of extended Kaman filter which compensates only deterministic bias error model.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.2
• /
• pp.223-228
• /
• 2010

In the midst of worldwide response to climate change, the advanced ports including LA/LB(Los Angeles/Long Beach) has started to reduce carbon emission from port area which has not been targets of interests in the worldwide cooperation. Recently, the Port of Busan has started to reduce carbon emission from the port area under the Green Port Strategy in Korea. However, the low-carbon port management increases the cost of port management and negatively impacts the port competitiveness in the short term. Therefore, the Busan Port Authority is carrying out the low-carbon projects directly and has not transfer the cost to the port users, such as shipowers, cargo owners and terminal operators. However, the Port Authority of LA/LB has transferred the cost at low-carbon port management to customers of port. In this study, comparative analysis on cost of low-carbon port management at Busan and LA/LB is carried out for sustainable port management.

• Journal of the Korean Home Economics Association
• /
• v.44 no.8
• /
• pp.79-87
• /
• 2006

The purpose of this study was to estimate the minimum monthly food cost for the low income population. The food consumption data of 9,311 individuals from the 2001 Korean National Health and Nutrition Survey was used. The monthly food cost was calculated using the Consumer Food Price Database for the year 2001 provided by the Public Health Nutrition Laboratory, Seoul National University. The low income population (n = 1,310) was characterized as older age, lower income, smaller family size, lower education level, and lower energy intake as compared with the total population (n = 8,001). The estimated food cost showed that men in the low income population needed 15% more money for purchasing food to maintain the energy intake level at the average energy intake level of men in the total population. It was also estimated that women in the low income population needed 9% more money for purchasing food to maintain the energy intake level at the average energy intake level of women in the total population. There were differences in monthly food costs depending on the sex and age, and family size. The results of this study could be used as basic information to establish minimum food cost for the low income population in Korea.

• The KIPS Transactions:PartC
• /
• v.14C no.5
• /
• pp.431-438
• /
• 2007

RFID system is core technology that construct ubiquitous environment for replacement of barcode technology. Use ratio of RFID system rapidly increase because the technology has many good points such as identification speed, storage space, convenience etc. But low-cost tag operates easily by query of reader, so the system happened user privacy violent problem by tag information exposure. The system studied many ways for security application, but operation capability of low-cost tag is about $5K{\sim}10K$ gates, but only $250{\sim}3K$ gates allocated security part. So it is difficult to apply security to the system. Therefore, this scheme uses dividing 64 bits and reduces arithmetic, so proposed scheme provide mutual authentication that can apply to low-cost RFID system. Existing methods divide by 4 and used 96 bits. However, that reduces 32 bits length for lightweight and reduced from communication number of times of 7 times to 5 times. Also, because offer security by random number than existing scheme that generate two random numbers, that is more efficient. However, uses hash function for integrity that was not offered by XOR arithmetic and added extension of proposed scheme. Extended scheme is not offered efficiency than methods that use XOR arithmetic, but identification distance is mode that is proposed secure so that can use in for RFID system.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.75-82
• /
• 2012

Elimination of rotor position sensors mechanically coupled with the rotor shaft is attractive to variable speed drives primarily due to increased system reliability and cost reduction. In this regard, search for a simple and robust position sensorless control has been intensified in past few years specifically for low-cost, high-volume applications such as home appliances. This paper describes a new parameter insensitive position sensorless control for switched reluctance motor (SRM) drives satisfying such a need in this market segment. Two consecutive switch-on times of the controllable switch in hysteresis current control are compared to estimate the rotor position and speed. The proposed sensorless control algorithm is very simple to implement since it does not depend on extensive computation or any additional hardware. In addition, the proposed method is robust in that its dynamic performance is least affected by system parameter variations. The proposed approach is demonstrated on a single-controllable-switch-converter-driven SRM with two-phases that lends itself to a system with low cost and compact packaging which comes close to the intended applications. Analysis and simulation results followed by experimental verification are presented to demonstrate the feasibility of the proposed sensorless control method.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.247-250
• /
• 2009

This study considers the feasibility of using the low cost assembled separator. The graphite plate has been widely used as the separator in the field of PEMFCs(Polymer electrolyte membrane fuel cell) industry because of its excellent material properties such as good corrosion resistance, good electrical conductance and so on. However, there are some problems for the commercialization due to its poor cost effectiveness for the large volume manufacturing and lack of mechanical strength. From this respect, this study has focused on the manufacturing technology in order to reduce the price for the commercialization of separator. This study also shows that the assembled separator of the suggested structure, which is composed of grafoil and PC(PolyCarbonate) materials, could be manufactured at low cost enough for the mass production. The flow fields produced by cutting foils and the base plates of the separators were simply made by mechanical work.