• Restorative Dentistry and Endodontics
• /
• 제10권1호
• /
• pp.135-144
• /
• 1984

This study was undertaken to evaluate the degree of the marginal leakage of composite restoration with 3 brands of dental adhesives by means of the dye penetration at the enamel and dentinal margins. 150 cavities of class V were prepared on the buccal and lingual surfaces of 75 extracted anterior and premolar teeth, which were devided into 3 groups. The cavities were filled with composite resin, Silar$^{(R)}$ (3M) and Heliosit$^{(R)}$ (Vivadent) after application of the dental adhesives, specifically Scotchbond$^{(R)}$ (3M) which is essentially composed with halophosphorus ester of Bis-GMA, Dentin Adhesit$^{(R)}$ (Vivadent) which is polyurethane resin, and Enamel Bond$^{(R)}$ (3M) which is a product of Bis-GMA with low viscosity at internal surfaces and margins of the cavities. All specimens were immersed in $37^{\circ}C$, 0.5% methylene blue solution for 24 hours after thermocycling at $4^{\circ}C$ and $60^{\circ}C$, embedded in acrylic resin, and sectioned with diamond disk into two parts. The sectioned specimens observed with the light microscope. The following results were obtained: 1. The group filled with Scotchbond$^{(R)}$-Silar$^{(R)}$ the other two groups at the enamel margins. 2. No significant difference in the degree of the marginal leakage had appeared between Dentin Adhesit$^{(R)}$-Heliosit$^{(R)}$ group an d Enamel Bond$^{(R)}$-Silar$^{(R)}$ group at the enamel margins. 3. Severe marginal leakage with penetration of dye to the floor of cavity had appeared from the all three groups and no significant difference in the degree of marginal leakage existed between the three groups at the dentinal margins.

• Advanced Composite Materials
• /
• 제17권3호
• /
• pp.277-299
• /
• 2008

High quality and expedient processing repair methods are necessary to enhance the service life of bridge structures. Deterioration of concrete can occur as a result of structural cracks, corrosion of reinforcement, and freeze.thaw cycles. Cost effective methods with potential for field implementation are necessary to address the issue of the vulnerability of bridge structures and how to repair them. Most infrastructure related applications of fiber-reinforced plastics (FRPs) use traditional hand lay-up technology. The hand lay-up is tedious, labor-intensive and relies upon personnel skill level. An alternative to traditional hand lay-up of FRP for infrastructure applications is Vacuum Assisted Resin Transfer Molding (VARTM). VARTM uses single sided molding technology to infuse resin over fabrics wrapping large structures, such as bridge girders and columns. There is no work currently available in understanding the interface developed, when VARTM processing is adopted to wrap fibers such as carbon and/or glass over concrete structures. This paper investigates the interface formed by carbon fiber processed on to a concrete surface using the VARTM technique. Various surface treatments, including sandblasting, were performed to study the pull-off tensile test to find a potential prepared surface. A single-lap shear test was used to study the bond strength of CFRP fabric/epoxy composite adhered to concrete. Carbon fiber wraps incorporating Sikadur HEX 103C and low viscosity epoxy resin Sikadur 300 were considered in VARTM processing of concrete specimens.

• 공업화학
• /
• 제32권4호
• /
• pp.449-455
• /
• 2021

복합재료는 단일물질이 갖는 각각의 특성을 복합화 함으로써 우수한 물성을 갖도록 구성한 물질로 금속 및 고분자의 성능을 뛰어넘는 재료로써 각광받고 있다. 다만, 생산시간이 길고, 단가가 비싼 단점이 있어 이를 극복하기 위해 많은 연구가 진행되고 있다. 본 연구에서는 복합재료의 대량생산 시 시간을 단축할 수 있는 에폭시 수지 경화제를 개발하였고, 난연성을 부여하여 이의 적용성을 확대하고자 하였다. 기본 물질로 사용한 에폭시 수지는 bisphenol F 및 resorcinol 구조의 에폭시 2종을 사용하였으며, 난연성을 부여하기 위하여 9,10-dihydro-9-oxa-10-phosphaphenantrene-10-oxide(DOPO)를 이용하여 변성하였다. 첨가제로는 triethylphosphate (TEP) 및 bis[(5-ethyl-2-methyl-1,3,2-dioxaphosphorinan-5-yl)methyl] methyl phosphonate P,P'-dioxide (FR-001)을 사용하여 7종의 조성물을 배합하였고, 열적 특성(겔화시간, 유리전이온도), 난연 성능을 평가하여 high pressure resin transfer molding (HP-RTM) 공법에 적용 가능한 에폭시 기지재를 개발하였다.

• 한국재료학회지
• /
• 제22권11호
• /
• pp.609-614
• /
• 2012

We report on the NO gas sensing properties of non-directional ZnO nanofibers synthesized using a typical electrospinning technique. These non-directional ZnO nanofibers were electrospun on an $SiO_2$/Si substrate from a solution containing poly vinyl alcohol (PVA) and zinc nitrate hexahydrate dissolved in distilled water. Calcination processing of the ZnO/PVA composite nanofibers resulted in a random network of polycrystalline ZnO nanofibers of 50 nm to 100 nm in diameter. The diameter of the nanofibers was found to depend primarily on the solution viscosity; a proper viscosity was maintained by adding PVA to fabricate uniform ZnO nanofibers. Microstructural measurements using scanning electron microscopy revealed that our synthesized ZnO nanofibers after calcination had coarser surface morphology than those before calcination, indicating that the calcination processing was sufficient to remove organic contents. From the gas sensing response measurements for various NO gas concentrations in dry air at several working temperatures, it was found that gas sensors based on electrospun ZnO nanofibers showed quite good responses, exhibiting a maximum sensitivity to NO gas in dry air at an operating temperature of $200^{\circ}C$. In particular, the non-directional electrospun ZnO nanofiber gas sensors were found to have a good NO gas detection limit of sub-ppm levels in dry air. These results illustrate that non-directional electrospun ZnO nanofibers are promising for use in low-cost, high-performance practical NO gas sensors.

• Composites Research
• /
• 제32권1호
• /
• pp.71-77
• /
• 2019

본 연구에서는 PAN 섬유용 폴리아크릴로니트릴(PAN)/디메틸술폭시드(DMSO) 용액의 보관시간 및 온도 변화에 따른 구조적 및 유변학적 특성에 대해 고찰하였다. 결과로서, 모든 PAN/DMSO 용액은 온도 변화에 따라 매우 특징적인 유변학적 거동을 보였다. 중합체 용액은 온도가 $40{\sim}70^{\circ}C$의 온도 범위까지 증가함에 따라 복합 점도가 증가하고 손실 계수($tan{\delta}$)가 감소함을 나타내었으며, 낮은 진동수에서 점도가 급격히 증가하는 것을 확인할 수 있었다. 이러한 결과는 저장 시간에 따라 중합체 용액내 물에 의한 분자간 수소 결합으로 겔 고분자 및 고밀도 겔 구조가 형성되었기 때문으로 판단된다.

• 한국작물학회지
• /
• 제56권3호
• /
• pp.212-218
• /
• 2011

본 연구는 남부지역에서 생력재배로 일시수확 및 관행재배로 생산한 녹두의 품질을 구명하고자 수행하였으며 결과는 다음과 같다. 생력재배는 7월 23일에 파종하여 10월 28일 일시에 수확하였고, 관행재배는 6월 13일에 파종하여 8월 중순부터 3차례 손으로 수확하였다. 1. 종실의 전분, 조단백질, vitexin 및 isovitexin 함량은 재배방식과 수확기에 따른 유의차가 없었다. 종실의 조지방 함량은 생력재배, 관행재배 3차, 2차, 1차 수확한 종실 순으로 많았다. 2. 종실의 포화지방산과 불포화지방산의 조성비는 재배방식 및 수확기에 따른 차이가 없었다. 지방산 종류는 관행재배로 2차 수확한 종실에서 17종으로 가장 많았고, 관행재배 3차나 생력재배로 일시에 수확한 종실은 12종으로 가장 적었다. 주요 포화지방산 중에서 palmitic acid와 arachidic acid는 관행재배 1차, 2차, 3차 및 생력재배 수확 순으로 높은 비율인 반면 stearic acid는 반대의 경향이었다. 주요 불포화지방산 중에서 linoleic acid는 관행재배 1차, 2차, 3차 수확 및 생력재배 순으로 조성 비율이 높았다. 3. 종실의 아밀로그램 특성은 재배방식 및 수확기에 따라 큰 차이를 나타냈다. 관행재배로 1차에 수확한 종실은 호화개시온도, 최고점도, 최종점도, 최저점도 및 강하점도가, 관행재배 3차에 수확한 종실은 치반점도가 유의하게 높았다. 반면에 생력재배로 수확된 종실은 모든 아밀로그램 측정값이 현저하게 낮았다. 4. 녹두나물을 생산하고 나물의 수율과 색도 및 아미노산 함량을 측정한 결과, 생력재배로 생산한 녹두는 나물의 생산수율이 낮으나 색도와 아미노산 함량은 관행재배로 수확한 종실을 이용하여 생산한 나물과 비슷하였다.

• 한국식생활문화학회지
• /
• 제28권4호
• /
• pp.392-400
• /
• 2013

The purpose of this study was to determine the optimal amounts and mixing condition of skim milk powder (A), and roselle (B) for the production of yogurt prepared with roselle. The experiment was designed according to the central composite design for estimating the response surface method, which yielded ten experimental points, including two replicates for the skim milk powder and roselle. The physicochemical and mechanical analysis of each sample, including pH (P<0.001), titratable acidity (P<0.001), color (P<0.05), viscosity (P<0.001), showed significant differences. Antioxidant properties (total phenolic content, DPPH free radical scavenging activity) and viable cell counts of lactic acid were significantly different (P<0.05). The sensory measurements were significantly different in color, flavor, sourness, texture, and overall quality (P<0.05). The optimal formulation, calculated by numerical and graphical methods, was 7.82 g of skim milk powder and 2.09 g of roselle. From findings of this study, the roselle may be used in yogurt and can be applied for other food industries.

• 한국수소및신에너지학회논문집
• /
• 제27권1호
• /
• pp.121-126
• /
• 2016

Hydraulic performance of a micro-bubble pump has been analyzed by numerical simulation and experimental measurements. Flow recirculation apparatus between the pump inlet and outlet reserviors has been adopted to measure pump performance according to flow conditions sequentially. To analyze three-dimensional flow field in the micro-bubble pump, general analysis code, CFX, is employed. SST turbulence model is employed to estimate the eddy viscosity and compared the pump performance to k-${\varepsilon}$ model. Unstructured grids are used to represent a composite grid system including blade, casing and inlet casing. It is found that the numerical model used in the present study is effective to evaluate the pump performance. From the numerical simulation, low velocity region due to pressure loss is decreased where pump efficiency has maximum value. Detailed flow field inside the micro-bubble pump is also analyzed and compared.

• 소성∙가공
• /
• 제25권6호
• /
• pp.402-408
• /
• 2016

A manufacturing technology of carbon fiber composites with thermoplastic polymer pellets and continuous woven fiber was investigated using a compression molding process. To secure the impregnation of resin into the porosity of fabric the composite specimens were prepared with general injection-molding grade polypropylene pellets and low viscosity polycarbonate pellets. Tensile tests of polypropylene and polycarbonate composites were performed. Polycarbonate composites showed higher fracture strength than that of polypropylene composites because of the difference of matrix properties. However, the increase rate of strength was lower than that of polypropylene composites due to the difference of coherence between matrix and reinforcement. To investigate the effect of carbon fiber volume fraction on the fracture strength variation polypropylene composites with different volume fraction were compression molded and tensile tests were performed together. It was shown that the fracture strength of the polypropylene composites increased by 3.2, 5.4 and 6.9 times with the increase of carbon fabric volume fraction of 0.256, 0.367, and 0.480, respectively.

• Steel and Composite Structures
• /
• 제43권3호
• /
• pp.389-401
• /
• 2022

This study investigated the flowability and mechanical properties of cost-effective steel fiber reinforced ultra-high performance concrete (UHPC) by using locally available materials for field-cast application. To examine the effect of mixture constituents, five mixtures with different fractions of silica fume, silica powder, ground granulated blast furnace slag (GGBS), silica sand, and crushed natural sand were proportionally prepared. Comprehensive experiments for different mixture designs were conducted to evaluate the fresh- and hardened-state properties of self-consolidating UHPC. The results showed that the proposed UHPC had similar mechanical properties compared with conventional UHPC while the flow retention over time was enhanced so that the field-cast application seemed appropriately cost-effective. The self-consolidating UHPC with high flowability and low viscosity takes less total mixing time than conventional UHPC up to 6.7 times. The X-ray computed tomographic imaging was performed to investigate the steel fiber distribution inside the UHPC by visualizing the spatial distribution of steel fibers well. Finally, the tensile stress-strain curve for the proposed UHPC was proposed for the implementation to the structural analysis and design.