• Proceedings of the Korean Fiber Society Conference
• /
• 1997.10a
• /
• pp.32-35
• /
• 1997

Aggregation states ans electro-optic properties of a binary mixture by mixing a side chain type liquid crystalline polymer(LCP) and a low molecular weight liquid crystal(LMLC) have been studied. Side chain liquid crystalline polysiloxanes were synthesized from allyl bromide, p-hydroxy benzoic acid, p-cyanophenol, p-methoxyphenol and polysiloxanes. Low molecular weight liquid crystals were synthesized from allyl bromide, p-hydroxy benzoic acid and 4-cyano 4'-hydroxy biphenyl. And then, their properties were compared with blended liquid crystals. The thermal properties of the blended liquid crystals were evaluated using differential scanning calorimetry. The phase behavior of blended sample with temperature were also observed polarized microscope with hot stage. Thus, it seemed to us that a study of LC polysiloxanes with LMLC would be useful, especially in view of the fact that, systematic investigations have been carried out on the effects of changes in LCP/LMLC binary system on the properties of this relatively new type of liquid crystal.

• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.958-968
• /
• 1998

Porous silica ceramics were prepared using DCCA(Drying Control Chemical Additives) Such as uncharged polymer(Polyethylene glycol) and protein (Lipase) under H2O/Low-grade TEOS=10 C2H5OH/Low-grade TEOS=1 HC1/Low=grade TEOS=0.01 After Plain which doesn't added DCCA and samples of 11 sorts which varied molecular weight of PEG(Mw=600, 1000, 2000) quantity of Lipase and concentration of wat-er were synthesized gellation time and thermal analysis were investigated. After heat-treated at 600, cry-stal structures analyses of SiO2 polymer and characteristics of pores were investigated. Gellation time was retarded about 2-6 times as compared with plain resulting in addition of DCCA and crystal structures ex-hibited amorphous state. Moreover as increase of water a short gellation time was obtained. The samples added PEG showed increase of specific surface areas up to 20-40% and had micropores while those of Lipase were decreased about 90% and showed broad pore size distribution.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.11
• /
• pp.1109-1112
• /
• 1995

Bis(silyl)alkylbenzenes such as bis(1-sila-sec-butyl)benzene (1) and 2-phenyl-1,3-disilapropane (2) were prepared in high yields by reduction of the corresponding chlorosilanes with LiAlH4. The dehydropolymerization of 1 and 2 was carried out with group 4 metallocene complexes generated in situ from Cp2MCl2/Red-Al and Cp2MCl2/n-BuLi (M=Ti, Hf), producing two phases of polymers. The TGA residue yields of the insoluble polymers were in the range of 64-74%. The molecular weights of the soluble polymers produced ranged from 700 to 5000 (Mw vs polystyrene) and from 500 to 900 (Mn vs polystyrene). The dehydropolymerization of 1 and 2 seemed to initially produce a low-molecular-weight polymer, which then underwent an extensive cross-linking reaction of backbone Si-H bonds, leading to an insoluble polymer.

• Elastomers and Composites
• /
• v.45 no.2
• /
• pp.122-128
• /
• 2010

We measured shear viscosity of copoly(styrene(St)/butyl methacrylate(BMA)) (co-PSB) particles, with a capillary rheometer at $170^{\circ}C$, prepared by suspension polymerization with hydrophobic silica as a stabilizer. co-PSB particles with the weight average molecular weights of lower than 74,800 g/mol displayed a Newtonian behavior at low shear rates. With the weight average molecular weight exceeding 136,800 g/mol, co-PSB particles showed shear thinning against shear rates and the absolute value of the slopes between shear viscosity vs. shear rate increased. When the ratio between St and BMA changed from 7/3 to 5/5 to 3/7, shear viscosity and glass transition decreased despite similar molecular weights. When the ratio was 1/9, it showed a large increase in initial shear viscosity despite reduced glass transition. Shear viscosity exhibited an increase in proportion to carbon black concentration. The effect of carbon black concentration on the shear viscosity of co-PSB composites was less pronounced compared to varying molecular weights and/or compositional ratio.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.891-893
• /
• 1992

Polymers have good electrical properties as an insulation material. Though they show more and less poor resistance to heat, radiation, and oxygen, the poor properties have been overcame by developing new resin with the saturated molecular structure and compounding resin with resistive fillers. Polymer insulators have many advantages; light weight, good mechanical properties, better contaimination performance, low cost by mass productivity, no destruction in many pieces, good flexibility in design, short manufacturing time. Usage of polymer insulators has increased rapidly with good credit on long term properties in advanced nations and will continue to grow.

• Korean Journal of Materials Research
• /
• v.9 no.12
• /
• pp.1160-1169
• /
• 1999

In this study, the silane primers were introduced to improve the interface adhesion between copper and epoxy. Especially, the polymer types obtained by solution and emulsifier-free emulsion polymerization of vinyltriethoxysilane and the low molecular weight types of 3-aminopropyltriethoxysilane(3-APTES) and 3-glycidoxypropyltrimethoxysilane(3-GPTMS) were used to improve the adhesion strength between epoxy and copper. Also, the surface of copper was treated by 1,1,1-trichloroethane. According to the results, the interfacial adhesion strength of copper-epoxy increased about 2~5 times with the introduction of silane primer. Also, the optimum treatment time of copper surface was about 10 minutes. Additionally, the adhesion strength as a function of concentration of low molecular weight silane was maximum at about 0.5 vol.% for 3-APTES and about 0.2 vol% for 3-GPTMS.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1708-1714
• /
• 2013

Polyhexamethylene guanidine (PHMG) polymers used as an active ingredient in an antibacterial humidifier disinfectant were reported to cause harm to the human health when inhaled, although physical contact with this material was known to present low toxicity to humans. It is therefore necessary to develop an optimal analysis method which enables detection and analysis of PHMG polymers. MALDI-TOF investigations of PHMG are performed with a variety of matrices, and it is found that CHCA and 2,5-DHB are excellent matrices which well reflects the polymer population even at high mass. For the provided PHMG sample, the number-average ($M_n$) and weight-average ($M_w$) molecular masses were determined to be 744.8 and 810.7, respectively, when the CHCA was used as a matrix. The rank of the matrices in terms of averaged molecular weight was CHCA ~2,5-DHB > 5-NSA > DHAP, THAP > ATT > IAA ~ super-DHB ~ HABA. In addition, PSD of the PHMG oligomer ions exhibited a few unique fragmenation characteristics. The formation of a- and c-type fragments was the major fragmentation pathway, and the 25-Da loss peaks generally accompanied a- and c-type fragments.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.1
• /
• pp.1-14
• /
• 2008

To prepare weather-resistant modified silane acrylic resin coatings for an architectural purpose, tetrapolymers were synthesized by radical polymerization. 3-Methacryloxypropyltrimethoxysilane (MPTS) as a silicone monomer and n-butyl acrylate, methyl methacrylate, and n-butyl methacrylate as acrylic monomers were used. The composition of monomers was adjusted to fix the glass transition temperature of acrylic polymer for $20^{\circ}C$. The composition of MPTS in the synthesized polymer were varied from 10 wt% to 30 wt%. On the basis of synthesized resin amber paints were prepared and their physical properties and effects on weatherability were examined. The presence of MPTS in modified silane acrylic resins generally resulted in low molecular weight and broad molecular weight distribution, and also lowered the viscosity of the copolymers. The coated films prepared from these resins showed good and balanced properties in general. Adhesion to the substrate was outstanding in particular. Weatherability tests were carried out in three different types such as outdoor exposure, QUV, and SWO. The test results showed that the modified silane acrylic resins containing 30 wt% of MPTS had superior weathering properties.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.12
• /
• pp.1890-1894
• /
• 2008

Apoemulsan is a biopolymer with potent emulsification activity, produced by Acinetobacter venetian us RAG-1 (RAG-1). The wee gene cluster is responsible for apoemulsan biosynthesis. The analysis of (i) a putative polysaccharide copolymerase mutant (${\Delta}wzc$), (ii) a putative polymerase mutant (${\Delta}wzy$), and (iii) an apoemulsan-deficient variant (${\Delta}2$) indicated that the wee gene cluster controls the synthesis of two polysaccharides: high molecular weight (HMW) and low molecular weight (LMW). LMW polysaccharide of wee origin was present in LPS isolated from RAG-1 cells, suggesting a link to the Lipid A-core of LPS molecules. SDS-PAGE analysis indicated that apoemulsan is copurified with LPS polysaccharide, with implications in the emulsification activity of RAG-1 polymer.

• Applied Chemistry for Engineering
• /
• v.1 no.1
• /
• pp.1-10
• /
• 1990

Polysilane derivatives are attracting considerable attention as a new class of material since 1980. The preparation methods of low molecular weight, cyclic, and high molecular weight polysilane derivatives are described, and also photochemistry characteristics for silicon-silicon single bond and for the nature of the substituent on silicon backbone are discussed. Polysilanes may be used as a precursors to silicon carbide fiber, as photoresist in microelectronics, as photoconductor, and as photoinitatior for free radical polymerization.