• Macromolecular Research
• /
• 제11권1호
• /
• pp.25-35
• /
• 2003

A series of random poly(ethylene-co-1,4-butylene terephthalate)s (PEBTs), as well as poly(ethylene terephthalate) (PET) and poly(1,4-butylene terephthalate) (PBT), were synthesized by the bulk polycondensation. Their composition, molecular weight, and thermal properties were determined. All the copolymers are crystallizable, regardless of the compositions, which may originate from both even-atomic-numbered ethylene terephthalate and butylenes terephthalate units that undergo inherently crystallization. Non-isothermal crystallization exotherms were measured over the cooling rate of 2.5-20.0 K/min by calorimetry and then analyzed reasonably by the modified Avrami method rather than the Ozawa method. The results suggest that the primary crystallizations in the copolymers and the homopolymers follow a heterogeneous nucleation and spherulitic growth mechanism. However, when the cooling rate increases and the content of comonomer unit (ethylene glycol or 1,4-butylene glycol) increases, the crystallization behavior still becomes deviated slightly from the prediction of the modified Avrami analysis, which is due to the involvement of secondary crystallization and the formation of relatively low crystallinity. Overall, the crystallization rate is accelerated by increasing cooling rate but still depended on the composition. In addition, the activation energy in the non-isothermal crystallization was estimated.

• 한국염색가공학회지
• /
• 제29권3호
• /
• pp.122-130
• /
• 2017

In the direct digital textile printing process, the pre-treatment process is an essential condition for products by forming a clear pattern by sticking and penetration of DTP dye without spreading on the fabric. Recently, pre-treatment agent is changing from high viscosity to low viscosity in order to reduce defects of fabric during pre-treatment process. In this study, pre-treatment agent of acrylic polymer with low viscosity(less than 50cps) was prepared according to the solid content of the polymer, pre-treated on the cotton fabric, and direct DTP printing was performed to compare the color and sharpness. As a result, it showed high color at a viscosity of 50cps or less. When the solid content of the polyacrylic acid having a high molecular weight(A1) was 2.5wt%, when the solid content of the polyacrylic acid having a low molecular weight(A2) was 1 - 1.5wt%, the color was the best. And when the solid content of A1 and A2 was 1.5wt%, the degree of spreading was small and A1 was superior to A2 at the sharpness.

• 폴리머
• /
• 제25권1호
• /
• pp.115-121
• /
• 2001

수평균 중합도 10000 및 신디오탁틱 다이애드기 함량 61.5%의 고분자량 신디오탁틱 폴리비닐알코올(high molecular weight syndiotactic poly(vinyl alcohol) (HMW s-PVA))/요오드계 편광필름을 제조하고 이의 흡착 거동 및 열수 하에서의 요오드의 내구성을 고찰하였다. 아탁틱 PVA 및 저분자량 s-PVA/요오드계 필름과 비교할 때 열수하에서의 HMW s-PVA 필름의 용해도 및 HMW s-PVA/요오드계 필름의 요오드 탈착은 현저히 억제되었다. 요오드 침지시간이 길어질수록 열수하에서의 요오드 탈착현상이 점차 심화되었다. 이는 처리 시간이 길어짐에 따라 PVA 분자와 요오드 분자간에 안정한 복합체가 형성되기보다는 물리적인 흡착에 의하여 흡착량이 증가하였기 때문이라고 설명된다.

• Journal of Pharmaceutical Investigation
• /
• 제34권4호
• /
• pp.263-267
• /
• 2004

Branched and linear polyethylenimines (PEIs) have been studied as efficient and versatile agents for gene delivery in vitro and in vivo. PEIs exist in a linear or branched topology and are available in a wide range of molecular weight (Mw). Most studies have been done using PEIs with Mw higher than 10Kd. This study was aimed to test the transfection efficiency and the cell viability following gene delivery using PEI of Mw 2Kd, a relatively lower Mw cationic polymer. We used murine interleukin-2(mIL-2) plasmid DNA complexed with branched PEI 2Kd or 25Kd, and transfected them into a myoblast muscle cell line, C2C12. The cellular uptake of mIL-2 plasmid DNA was determined using quantitative polymerase chain reaction. RNA transcript levels were studied in the myoblast cells. Our results show that PEI 2Kd was as effective as PEI 25Kd in celluar gene delivery and transfection efficiency in C2C12 cells. Moreover, MTT assay indicated that PEI 2Kd/DNA complexes did not significantly reduce the cell viability regardless of N/P ratios. These results suggest that PEI of Mw 2Kd might play a role as effective and low toxic nonviral vector systems for muscular cell lines.

• 폴리머
• /
• 제37권5호
• /
• pp.606-612
• /
• 2013

$Al(O-i-Pr)_3$을 촉매로 이용하고 중합 개시제로 glycidol을 사용하여 L-lactide를 개환중합하여 glycidol-poly(lactide)(Gly-PLA)를 얻었다. $^1H$ NMR 분석 결과 glycidol의 말단에 존재하는 수산기가 Gly-PLA에는 존재하지 않았고 이를 통해 glycidol의 말단에 존재하는 OH기가 개시제의 역할을 하여 중합이 진행되었음을 확인하였다. Llactide용액중합과 벌크중합을 진행하였으며, L-lactide/glycidol 몰비, 중합 온도와 시간에 따라 생성된 Gly-PLA의 분자특성을 관찰하였다. L-lactide/glycidol 몰비가 증가할수록 수율과 분자량은 증가하였다. 또한 L-lactide/glycidol 몰비가 증가할수록 저분자량에 해당하는 낮은 녹는점 피크는 줄어들고, 고분자량에 해당하는 높은 녹는점 피크가 증가하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1025-1029
• /
• 2003

We studied the cross-sectional profiles of deformed thermoplastics in hot embossing process and compared with melt flow index for various embossing conditions such as embossing temperature, embossing pressure and initial thickness of the thermoplastics. The fastest embossing times for complete penetration of the cavities were obtained at temperature greater than $60^{\circ}C$ above glass transition temperature (Tg). When the melt flow index of polymer is low, the penetration ratio does not become large even if the embossing pressure increases. The complete occupation of the cavities was easier obtained with high melt flow index polymer than low melt flow index polymer at the same process condition. We believe these results can be very useful for optimizing nanostructured hot embossing also known nanoimprinting process conditions.

• 폴리머
• /
• 제38권2호
• /
• pp.199-204
• /
• 2014

본 연구는 2-ethylhexyl acrylate와 2-hydroxyethyl acrylate 기본구조에 isobornyl acrylate와 tetrahydrofurfuryl acrylate(THFA)의 조성비를 변화시키면서 광중합된 4원 공중합체를 합성한 후 가교제로 1,6-hexanediol diacrylate가 혼합된 시럽을 제조하였다. 합성한 시럽에 UV-광원을 조사시켜 점착제를 제조한 후 점착특성과 광학특성을 고찰하였으며 시럽의 기본물성인 고형분, 점도, 및 분자량 분석도 수행하였다. THFA의 함량이 증가할수록 시럽의 분자량은 감소하였으나 고형분은 반대로 증가하였다. 점착제의 박리강도는 THFA의 함량에 따른 반비례관계를 나타내고 점착제의 표면에너지는 비례관계를 나타내었다. 또한 모든 점착제에서 92% 이상의 광투과도와 1.0%이하의 haze값, 그리고 1.0 이하의 색차계값을 보여주었다.

• 폴리머
• /
• 제35권5호
• /
• pp.444-450
• /
• 2011

천연 알지네이트를 저분자화시키기 위해 과산화수소/초음파를 사용하였다. 이때 반응 온도 시간, 과산화수소 농도 그리고 초음파 조사 조건 등이 저분자화 생성물에 미치는 영향을 검토하였다. 생성된 저분자 알지네이트의 화학적 구조를 규명한 결과 주로 1,4-glycosidic bond가 끓어져서 저분자화가 진행되고 특정조건에서 생성물에 formate 그룹이 형성됨을 확인할 수 있었다. 생성물의 분자량은 MALS가 부착된 GPC를 사용하여 측정하였다. 2 wt%의 고분자 알지네이트 용액을 50 $^{\circ}C$의 초음파 분위기에서 0.5시간 동안 반응시켰을 때 분자량이 450 kDa에서 15.9 kDa로 저하되었다. 또한 분자량분포도는 상당히 좁고 반응 조건에 따라 큰 변화 없이 일정함(~2)을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.3001-3004
• /
• 2014

A series of hydroxyl-derivatized quaternized polymers were successfully synthesized by atom transfer radical polymerization (ATRP) and Cu(I)-catalyzed 1,3-dipolar cycloaddition of azide and alkynes (click chemistry), followed by quaternization reactions. ATRP was employed to synthesize poly(2-hydroxyethyl methacrylate) (PHEMA), followed by introduction of alkyne groups using pentynoic acid, leading to HEMA-Alkyne. 2-Azido-1-ethanol and 3-azido-1-propanol were combined with the HEMA-Alkyne backbone via click reaction, resulting in triazole-ring containing hydroxyl-derivatized polymers. Quaternization reactions with methyl iodide were conducted on the triazole ring of each polymer. Molecular weight, molecular weight distribution, and the degree of quaternization (DQ) were determined by gel permeation chromatography (GPC) and $^1H$ NMR spectroscopy. The average molecular weight ($M_n$) of the resulting polymers ranged from $5.9{\times}10^4$ to $1.05{\times}10^5g/mol$ depending on the molecular architecture. The molecular weight distribution was low ($M_w/M_n$ = 1.26-1.38). The transmission spectra of the 0.1 wt % aqueous solutions of the resulting quaternized polymers at 650 nm were measured as a function of temperature. Results showed that the upper critical solution temperature (UCST) could be finely controlled by the level of DQ.

• 폴리머
• /
• 제34권6호
• /
• pp.501-506
• /
• 2010

물에 잘 녹지 않는 고분자량의 키토산을 가수분해하여 수용성을 갖는 저분자량 키토산을 제조하였다. 키토산을 효율적인 유전자 전달체로 개발하기 위하여 항산화제의 일종인 리포산과 결합하여 빗살 형태의 공중합체를 제조하였다. 양친성을 가지는 공중합체는 수용액 상에서 자기조립을 하여 나노입자를 형성하였다. 나노입자의 평균크기는 217.6 nm이었고 유전자와 복합체를 이루었을 때의 평균크기는 170 nm로 나타났다. 새롭게 만들어진 키토산-리포산 공중합체는 낮은 세포독성을 나타내었고 순수한 키토산에 비하여 10배 정도 높은 형질 발현효율을 보여주었다.