본 논문에서는 6~18 GHz 주파수 범위의 미앤더선로로 구성된 다층 구조의 광대역 원편파 편파기를 설계 및 제작하였다. 미앤더선로-유전체-스페이서의 단위 구성요소에 대한 전송행렬을 경계값 해를 적용하여 제시하였다. 또한, 도파관 모델이 적용되도록 미앤더선로의 배열 구조와 함께 미앤더선로의 등가 서셉턴스를 HFSS 전자기장 해석방법으로 계산하는 방법을 제안하였다. 전자기장 해석방법과 전송행렬을 연동한 하이브리드 방법과 반복 수행법을 이용하여 광대역, 낮은 삽입손실, 낮은 축비 특성을 갖는 다층 구조의 미앤더선로 원편파 편파기를 설계하였다. 제작된 편파기는 동작주파수의 92 % 대역에서 -10 dB 이하의 반사손실과 평균 -0.24 dB의 삽입손실 및 평균 2.6 dB 이하의 축비 특성으로 설계값과 잘 일치함을 확인하였다.
본 논문에서는 차량 충돌 방지 레이더 시스템 응용을 위하여 중심 주파수가 77 GHz인 도파관 (waveguide) 전압조정 발진기 (VCO, voltage controlled oscillator)를 구현하였다. 구현된 도파관 전압 조정 발진기는 GaAs 기반의 건다이오드 (Gunn diode)와 버랙터 다이오드 (varactor diode), 도파관 천이기 (waveguide transition), 저역 통과 필터(LPF, low pass filter) 및 공진기 (resonator) 기능을 동시에 수행하는 다이오드의 바이어스 (bias) 포스트 (post)로 구성되어진다. 77 GHz 신호는 동공 (cavity)을 38.50 GHz에서 발진하도록 설계하여 2체배된 신호를 사용하였으며 WR-12에서 WR-10으로 천이되어 출력된다. 도파관 천이기는 77 GHz의 중심주파수에서 1.86 dB의 삽입손실(insertion loss)과 -30.22 dB의 입력반사계수 (S11, input reflection coefficient) 특성을 갖는다. 제작된 도파관 전압조정 발진기는 870 MHz의 대역폭 (bandwidth)과 12.0 dBm ~ 13.75 dBm의 출력 전력 특성을 나타내었다. 위상잡음 특성은 1 MHz 오프셋 (offset)에서 -100.78 dBc/Hz의 우수한 특성을 얻었다.
본 논문에서는 병원 실내 위치기반 의료정보 푸쉬 서비스를 위한 안전하고 효율적인 익명 인증 스킴을 제안한다. 제안한 스킴은 다음과 같은 장점들을 가진다. (1)안전한 일방향 해쉬 함수(secure one-way hash function)를 사용하여 의료 서비스 사용자와 의료 관리센터 사이에 연산 복잡성을 최소화 하였다. (2)의료 관리센터 측에 삽입공격(insertion attacks) 및 훔친 검증자 공격(stolen-verifier attacks) 등 다양한 암호학적 공격들에 대한 대상이 될 수 있는 민감한 정보를 저장하는 검증 테이블(verification table)을 전혀 필요로 하지 않는다. (3)안전한 상호 인증과 키 설정(secure mutual authentication and key establishment), 기밀 통신(confidential communication), 사용자 프라이버시(user's privacy), 간단한 키 관리(simple key management), 세션 키 독립성 (session key independence)등을 보장하여 높은 보안 수준을 제공한다. 결론적으로 제안한 스킴은 병원 내 실내 위치기반 의료정보 푸쉬 서비스 환경에서 의료 서비스 사용자와 의료 관리센터 사이에서 아주 낮은 연산 오버헤드를 제공하기 때문에 스마트폰과 같은 경량 디바이스를 이용한 다양한 위치기반 의료정보 서비스 환경에 매우 실용적으로 활용될 수 있다.
본 논문은 CMOS 디지털 회로에서의 전력 소모의 주원인인 신호의 천이중에서 회로의 동작에 직접적인 영향을 미치지 않는 불필요한 신호의 천이인 글리치를 줄이기 위한 효율적인 알고리즘을 제시한다. 제안된 알고리즘은 회로의 지연 증가 없이 게이트 사이징과 버퍼 삽입에 의해 경로 균등(path balancing)을 이룸으로써 글리치를 감소시킨다. 경로 균등화를 위하여 먼저 게이트 사이징을 통해 글리치의 감소와 동시에, 게이트 크기의 최적화를 통해 회로 전체의 캐패시턴스까지 줄일 수 있으며, 게이트 사이징 만으로 경로 균등화가 이루어지지 않을 경우 버퍼 삽입으로 경로 균등화를 이루게 된다. 버퍼 자체에 의한 전력 소모 증가보다 글리치 감소에 의한 전력 감소가 큰 버퍼를 선택하여 삽입한다. 이때 버퍼 삽입에 의한 전력 감소는 다른 버퍼의 삽입 상태에 따라 크게 달라질 수 있어 ILP (Integer Linear Program)를 이용하여 적은 버퍼 삽입으로 전력 감소를 최대화 할 수 있는 저전력 설계 시스템을 구현하였다. 제안된 알고리즘은 LGSynth91 벤치마크 회로에 대한 테스트 결과 회로의 지연 증가 없이 평균적으로 30.4%의 전력 감소를 얻을 수 있었다.Abstract This paper presents an efficient algorithm for reducing glitches caused by spurious transitions in CMOS logic circuits. The proposed algorithm reduces glitches by achieving path balancing through gate sizing and buffer insertion. The gate sizing technique reduces not only glitches but also effective capacitance in the circuit. In the proposed algorithm, the buffers are inserted between the gates where power reduction achieved by glitch reduction is larger than the additional power consumed by the inserted buffers. To determine the location of buffer insertion, ILP (Integer Linear Program) has been employed in the proposed system. The proposed algorithm has been tested on LGSynth91 benchmark circuits. Experimental results show an average of 30.4% power reduction.
Purpose: Plate systems have been used for osteosynthesis of cranial and oromaxillofacial fracture. However, there is no consensus on the need for routine removal of plate and the question about indications of removal. Therefore, we present the retrospective study to clarify the indications and consensus of removal. Methods: The medical records of patients who were treated with rigid internal fixation using plates after craniofacial trauma were reviewed. Study variables included age, gender, type of fracture, type of plate, seniority of the operator, causes of removal, and time between insertion and removal. All results amendable to statistics were analyzed using SPSS 10.0 to determine which set of variables might affect the fate of the plates. Results: For a period of 10 years (March 1, 1994 through July 31, 2004), total of 41 plates(6.7%) were removed among 609 plates inserted into 419 patients; 27 plates were removed from 15 patients for infection, which is the most common cause of removal accounting for 65.8%. Mean time between insertion and removal is 35.2 months and mean age is 41.4 years. Most plates were removed from combined fracture(14.92%) and facial fracture(8.47%) and these were statistically significant. The age, gender, seniority of the operator and other variables were not statistically associated with plate removal. Conclusion: This retrospective study shows that routine removal does not appear to be clinically indicated due to respectively low removal rate and that the commonest indications for removal were infection.
Ryu, Dong Yeon;Lee, Sang Bong;Kim, Gil Whan;Kim, Jae Hun
Journal of Trauma and Injury
/
제32권3호
/
pp.150-156
/
2019
Purpose: To determine whether a peripherally inserted central catheter (PICC) meets the goals of a low infection rate and long-term use in trauma patients. Methods: From January 2016 to June 2018, the medical records of patients who underwent central venous catheterization at a level I trauma center were retrospectively reviewed. Data collected included age, sex, injury severity score, site of catheterization, place of catheterization (intensive care unit [ICU], emergency department, or general ward), type of catheter, length of hospital stay during catheterization, types of cultured bacteria, time to development of central line-associated bloodstream infection (CLABSI), and complications. Results: During the study period, 333 central vein catheters (CVC) were inserted with a total of 2,626 catheter-days and 97 PICCs were placed with a total of 2,227 catheter-days. The CLABSI rate was significantly lower in the PICC group when the analysis was limited to patients for whom the catheter was changed for the first time in the ICU after CVC insertion in the ER with similar indication and catheter insertion times (18.6 vs. 10.3/1,000 catheter-days, respectively, p<0.05). The median duration of catheter use was significantly longer in the PICC group than in the CVC group (16 vs. 6 days, respectively, p<0.05). Conclusions: The study results showed that the duration of catheter use was longer and the infection rate were lower in the PICC group than in the CVC group, suggesting that PICC is a safe and reliable alternative to conventional CVC.
본 연구에서는 아르키메데스의 삽입방법에 기반한 다양한 각의 삼등분 도구들을 조사하고, 일부 도구들을 제작하여 특징을 비교하였다. 이를 통해, 삼등분 도구의 제작 및 활용에서 사용의 편이성, 삼등분되는 각의 임의성, 구조의 간결성 등의 요소를 고려해야 한다는 것을 알았다. 기술한 요소들을 고려하여, 수학교실에서 활용할 수 있는 각의 삼등분 도구로 Veprtskii가 1888년에 제안한 도구에 주목하였다. 본 연구에서는 Veprtskii가 제안한 방법을 개선하여 나무젓가락과 철끈을 이용하여 각의 삼등분 도구를 제작하였다. 이때, 제작된 도구는 첫째, 다른 삼등분 도구에 비해 부품의 개수가 적고, 구조나 제작도 간단하였고, 둘째 사용 방법도 편리하며, 셋째 특정한 각이 아닌 임의의 각의 삼등분을 나타내며, 넷째 제작 비용이 저렴하고 제작 과정도 간단했다. 이 도구는 수학교실에서 삼각형의 외각의 성질, 이등변삼각형의 성질과 관련된 탐구 활동에서 폭넓게 활용될 수 있을 것으로 기대된다.
Journal of electromagnetic engineering and science
/
제10권1호
/
pp.28-34
/
2010
This paper introduces a new U.S. ultra-wideband(UWB: 3.1~10.6 GHz) 1:2 power divider based on a single section Wilkinson type configuration. The divider provides very flat in-band power splitting, high isolation, low insertion loss, sharp roll-off bandpass filtering, and DC blocking characteristics. The circuit consists of a $\lambda$/4 Y resonator, three capacitively coupled $\lambda$/2 short-circuited lines, and a resistor between the two output ports. The circuit structure was simulated with ADS and HFSS, and realized with low-temperature co-fired ceramic(LTCC) green tape, which has a dielectric constant of 7.8. $|S_{11}|$ better than 10 dB, $|S_{21}|$ and $|S_{31}|$ less than 3.2 dB, with both $|S_{22}|$ and $|S_{32}|$ measured as better than 12 dB for the whole UWB band. Measurement results agree closely with HFSS simulation results. The power divider has a compact size of $4\times9\times0.6mm^3$.
Objective : To evaluate the role of anterior lumbar interbody fusion in treatment of failed back surgery syndrome, the authors retrospectively analyzed the result of anterior lumbar interbody fusion performed in our institute. Methods : Fifteen FBSS patients due to variable causes have been treated with anterior lumbar interbody fusion in our institute from April 1994 to June 1999. We analyzed clinical changes in 15 patients who were followed up for an average of 23 months. Results : The etiologies of FBSS were post operative discitis(6 cases), post operative instability(3 cases), post operative adhesion(5 cases), and recurrence(1 case). These fifteen FBSS patients were treated with anterior lumbar interbody fusion. The overall treatment outcome was satisfactory(excellent and good) in 11 cases. Three patients were slightly improved, but post operative low back pain was remained. One patient who had underwent nerve root injury due to pedicle screw insertion showed no improvement. Conclusion : We conclude that the anterior lumbar interbody fusion for FBSS seems to be safe and favorable treatment in selective patients, because low incidence of nerve injury risk and post-operative infection.
KSII Transactions on Internet and Information Systems (TIIS)
/
제7권10호
/
pp.2544-2560
/
2013
As a cornerstone of the next generation air traffic management (ATM), automatic dependent surveillance-broadcast (ADS-B) system can provide continual broadcast of aircraft position, identity, velocity and other messages over unencrypted data links to generate a common situational awareness picture for ATM. However, since ADS-B messages are unauthenticated, it is easy to insert fake aircrafts into the system via spoofing or insertion of false messages. Unfortunately, the authentication for ADS-B messages has not yet been well studied. In this paper, we propose an efficient broadcast authentication scheme with batch verification for ADS-B messages which employs an identity-based signature (IBS). Security analysis indicates that our scheme can achieve integrity and authenticity of ADS-B messages, batch verification, and resilience to key leakage. Performance evaluation demonstrates that our scheme is computationally efficient for the typical avionics devices with limited resources, and it has low communication overhead well suitable for low-bandwidth ADS-B data link.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.