• Title/Summary/Keyword: Low head

Search Result 1,414, Processing Time 0.025 seconds

The Threshold Based Cluster Head Replacement Strategy in Sensor Network Environment (센서 네트워크 환경의 임계값 기반 클러스터 헤드 지연 교체 전략)

  • Kook, Joong-Jin;Ahn, Jae-Hoon;Hong, Ji-Man
    • Journal of Internet Computing and Services
    • /
    • v.10 no.3
    • /
    • pp.61-69
    • /
    • 2009
  • Most existing clustering protocols have been aimed to provide balancing the residual energy of each node and maximizing life-time of wireless sensor networks. In this paper, we present the threshold based cluster head replacement strategy for clustering protocols in wireless sensor networks. This protocol minimizes the number of cluster head selection by preventing the cluster head replacement up to the threshold of residual energy. Reducing the amount of head selection and replacement cost, the life-time of the entire networks can be extended compared with the existing clustering protocols. Our simulation results show that our protocol outperformed than LEACH in terms of balancing energy consumption and network life-time.

  • PDF

A Comparison of Standard Methods for Evaluating the Water Resistance of Shell Fabrics

  • Kwon, Myoung-Sook;Nam, Youn-Ja
    • The International Journal of Costume Culture
    • /
    • v.4 no.3
    • /
    • pp.241-248
    • /
    • 2001
  • Re water resistance of shell fabrics intended for we in outdoor apparel was measured using three different standard test methods, ASTM D 751, hydrostatic resistance, procedure A(Mullen test -- with and without a fabric support) and Procedure B (Hydrostatic head test). A database of information on their water resistance performance was created. The data collected with different methods were correlated and the advantages and disadvantages of each method were compared. The Mullen test with a support appears to give higher and more favorable water resistance values on shell fabrics preventing fabric rupture during the test. The hydrostatic head test gave lower hydrostatic pressure values than those measured on the two Mullen tests. The Mullen test is recommended for testing the water resistance of fabrics that high a relatively high water resistance because the Mullen tester applies a wide range of pressure. The hydrostatic head test is recommended for testing the fabrics that have relatively low water resistance. The area of the fabric sample that is in contact with the water is smaller in the Mullen test, so higher pressure levels can be reached and more samples should probably be tested to get a representative value for each fabric types. Furthermore, the hydrostatic head test was deemed more repeatable than the Mullen tests in his study.

  • PDF

The effect of head movement on HRTF in 3D sound system: Sensitivity analysis on Sphere HRTF (머리움직임이 입체음향 시스템의 머리전달함수에 미치는 영향: 구 머리전달함수의 민감도해석)

  • 김선민;박영진
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2002.05a
    • /
    • pp.353-358
    • /
    • 2002
  • Human's vision is mostly confined to the area in the front and we, humans heavily depend on the sense of hearing to gather information in areas out of our sight. Thus, the virtual reality system consisting of the 3D sound effect gives the user a much better sense of reality than the system without the sound effect. Virtual 3D sound technology has mainly been researched with binaural system. The conventional binaural sound systems reproduce the desired sound at two arbitrary points using two channels in 3-D space. Head movement of listener might be change the nominal acoustic transfer function and deteriorate the performance of 3D sound system based on loudspeakers that needs a crosstalk canceller. In this paper, low kinds of sensitivity functions of sphere HRTF are derived to investigate the effect of head movement on HRTF in 3D sound system. Changes of HRTF caused by rotational and translational motion of head are obtained as we calculate the derivatives of HRTF with respect to angle and distance.

  • PDF

A Study on Relationship between Heart Rate Variabilities and Autonomic Balance during Head-up Tilt (Head-up Tilt상태에서 심박변동과 자율신경활동 균형의 관계에 관한 연구)

  • 정기삼;신건수
    • Journal of Biomedical Engineering Research
    • /
    • v.18 no.1
    • /
    • pp.37-44
    • /
    • 1997
  • In this paper, the power spectral analysis of heart rate variability(HRV) was performed to evaluate effects of orthostatic stress with head-up tiIt on autonomic nervous system(ANS) for 25 healthy male subjects(age : 24 $\pm$ 5 yr.) and a new method was proposed to assess the autonomic balance. The ECG and respiration signals were recorded at tiIt angles of $0^{\circ}$, $45^{\circ}$, $90^{\circ}$and $0^{\circ}$ successively for 10 minutes per each stage under the condition of frequency controlled respiration(0.25Hz). Heat rate(HR) gradually increased ils the angle increased Similarly, according to the increment of angle, normalized low frequency component(0.05-0.15Hz) gradually increased, whereas normalized high frequency component (0.20-0.30Hz) was reduce4 From these results it is speculated that orthostatic stress head-up tiLt, results in the prevalence of sympathetic tone in autonomic balance with the increment of sympathetic tone and the decrement of parasympathetic tone, which seems to meanthat autonomic nervous system plays a major role in compensating for disturbances of cardiovascular system due to it.

  • PDF

Dominant Stockholder Illegality and Enterprise Value : Focusing on Korean Firm Cases

  • Kim, Sung Tack
    • Asia Pacific Journal of Business Review
    • /
    • v.1 no.2
    • /
    • pp.17-35
    • /
    • 2017
  • This research is a case study that focuses on how conglomerate illegality and corresponding penalty affects corporate performance and strategy. The research aims to provide base information for policy-makers as well as the general public about the corporate environment. The analysis results can be summarized as follows. First, profitability is represented as an M-curve. Profitability falls from indictment to the final pronouncement of the corporate head and increases upon his or her return. The result suggests that the absence of a corporate head could result in low profitability as the firm is exposed to owner risk. Secondly, significant effects on investment were not found. Investment showed a continuous increase from indictment to final judgment. This could have resulted from investment decisions made prior to the indictment, which are generally long-term. Meanwhile, the rate at which investments rose for core subsidiaries were lower, which makes it reasonable to suspect dwindling executive capacity due to the absence of a corporate head. Thirdly, employment showed a slight increase, but the rate was found to be greater during the periods following the final judgment. From a political perspective, this increase can be inferred from a give-and-take tradeoff between corporate employment and the pardon of the corporate head.

A Case of Solitary Fibrous Tumor Presenting as Lower Neck Mass (하경부 종물로 발현한 고립성 섬유종 1예)

  • Geum, Sang Yen;Kim, Jeong Kyu
    • Korean Journal of Head & Neck Oncology
    • /
    • v.37 no.2
    • /
    • pp.87-90
    • /
    • 2021
  • Solitary fibrous tumor (SFT) is rare mesenchymal tumor usually arising from pleura. SFT can be found at all anatomic site in our body but incidence of SFT is much lower in head and neck region especially at lower neck area. We found a case of SFT that presented as a lower neck mass in a 41-year old woman. Ultrasonography showed a 3×1cm sized hypoechoic mass in the intermuscular fat plane of left lower neck, and computed tomography showed a well circumscribed, low-density mass with contrast enhancement. Fine needle aspiration showed no malignant cells with abundant red blood cells, but it was not possible to completely rule out malignant tumors or nodules clinically. Surgery was performed to make a definitive diagnosis and histopathology showed tightly packed, round to fusiform cells with staghorn shaped vessels at microscopic examination. The tumor cell were positive for CD34 but negative for CD31 and S-100 protein.

Effects of Co Addition in High Strength and Low Thermal Expansion Invar Alloy (고강도 저열팽창 인바합금에 있어서 CO 첨가의 영향)

  • Kim, Bong-Seo;Jo, Yeong-Am;Yoo, Kyung-Jae;Kwon, Hae-Woong;Lee, Hui-Ung;Kim, Byung-Geol
    • Proceedings of the KIEE Conference
    • /
    • 1999.07d
    • /
    • pp.1901-1903
    • /
    • 1999
  • To investigate invar alloy as a core material for increased capacity over-head transmission line which have high strength and low thermal expansion coefficient, hardness and thermal expansion coefficient of Fe-Ni-Co alloy have been studied. It is necessary that invar alloy have low thermal expansion coefficient and high strength for increased capacity over-head transmission line. In this paper. we tried to find out the effect of Ni and Co which has ferromagnetic properties and high saturation magnetization. It was found that Ni decrease thermal expansion coefficient and hardness, Co decrease thermal expansion coefficient but increase hardness in Fe-xNi-Co system. In Fe-(29-x)Ni-Co system, the material has no low thermal expansion properties substituting Co instead of Ni in concentration range of $1\sim7$%Co.

  • PDF

Internal Flow Measurement of Very Low Specific Speed Semi-Open Impeller by PIV (PIV를 이용한 극저비속도 세미오픈임펠러의 내부유동 계측)

  • Nishino Koichi;Lee Young-Ho;Choi Young-Do
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.29 no.7 s.238
    • /
    • pp.773-783
    • /
    • 2005
  • Internal flow measurement of very low specific-speed semi-open impellers has been carried out by PIV in order to understand better the internal flow patterns that are responsible fur the unique performance of these centrifugal pumps operating in the range of very low specific speed. Two types of impellers, one equipped with six radial blades (Impeller A) and the other with four conventional backward-swept blades (Impeller B), are tested in a centrifugal pump operating at a non-dimensional specific-speed of $n_s=0.24$. Complex flow patterns captured by PIV are discussed in conjunction with the overall pump performance measured separately. It is revealed that Impeller A achieves higher effective head than Impeller B even though the flow patterns in Impeller A are more complex, exhibiting secondary flows and reverse flows in the impeller passage. It is shown that both the localized strong outward flow at the pressure side of each blade outlet and the strong outward through-flow along the suction side of each blade are responsible for the better head performance of Impeller A.

A Comparison of Functional Leg Length Inequality Before and After Manipulation of patients with Low Back Pain (요통환자의 도수교정 전.후의 기능적 다리길이 편차 비교)

  • Ma, Sang-Yeol
    • Journal of Korean Physical Therapy Science
    • /
    • v.13 no.1
    • /
    • pp.21-27
    • /
    • 2006
  • The purpose of this study was to identify the above mentioned therapy on the reduction of functional leg length inequality, by the manipulation(Thonpson technique). In 8 patients who have been chronically ill with low back pain and functional leg length inequality, for past 12 weeks, we analyzed and observed the progress of symptom and sign on pelvis(femur head line level, ilium length, ilium rotation), using by X-ray. The results after 12 week treatment, compared with before treatment, were as follows : 1. The improved in femur head line in the manipulation after 12 week treatment was very significant(p<.01) 2. The improved in ilium length in the manipulation after 12 week treatment was very significant(p<.01) 3. The improved in ilium rotation in the manipulation after 12 week treatment was significant(p<.05).

  • PDF

Influence of Blade Number on the Flow Characteristics in the Vertical Axis Propeller Hydro Turbine

  • Byeon, Sun-Seok;Kim, Youn-Jea
    • International Journal of Fluid Machinery and Systems
    • /
    • v.6 no.3
    • /
    • pp.144-151
    • /
    • 2013
  • In this paper, the design method of a low-head propeller-type hydro turbine is studied for various numbers of blades on an axial propeller. We also investigate the relationship between geometrical parameters and internal performance parameters, such as angular velocities (100, 200, 300, 400 rpm) and 2.5~4m low heads through a three-dimensional numerical method with the SST turbulent model. The numerical results showed that the blade number had a more dominant influence than the change in heads and rotational speed on the flow characteristics of the turbine. The distributions of pressure and velocity in the streamwise direction of the propeller turbine were graphically depicted. Especially, the relationship among dimensionless parameters like specific speed ($N_s$), flow coefficient (${\phi}$) and power coefficient (P) were investigated.