• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1025-1029
• /
• 2003

We studied the cross-sectional profiles of deformed thermoplastics in hot embossing process and compared with melt flow index for various embossing conditions such as embossing temperature, embossing pressure and initial thickness of the thermoplastics. The fastest embossing times for complete penetration of the cavities were obtained at temperature greater than $60^{\circ}C$ above glass transition temperature (Tg). When the melt flow index of polymer is low, the penetration ratio does not become large even if the embossing pressure increases. The complete occupation of the cavities was easier obtained with high melt flow index polymer than low melt flow index polymer at the same process condition. We believe these results can be very useful for optimizing nanostructured hot embossing also known nanoimprinting process conditions.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.5
• /
• pp.749-757
• /
• 2013

Objectives : The aim of the study is to investigate the relationship between salivary flow, palate recognition threshold, DMFT index and oral health influence point (OHIP-14) of the adults over 40 years old. Methods : Salivary flow and taste recognition threshold were measured in 220 adults over 40 years old from three dental clinics in Daegu from January 3 to February 4, 2012. A total of 208 questionnaires were analyzed. Results : The adults recognized the sour taste in low concentration level when the salivary flow was faster. DMFT index was low in those who recognized sweet and sour taste that affected OHIP-14. Conclusions : Tooth decaying food must be restricted because of its high acidity in the past despite the individuals' taste recognition threshold was neglected. Before the diet control, it is necessary to measure the taste threshold of the individuals. Training for improving salivary flow is very important to prevent dental caries and to preserve good taste.

• Journal of Korea Water Resources Association
• /
• v.53 no.12
• /
• pp.1193-1201
• /
• 2020

This study aims to develop a regression model that estimates a low-flow index that can be applied to ungauged basins. A total of 30 midsized basins in South Korea use long-term runoff data provided by the National Integrated Water Management System (NIWMS) to calculate average low-flow, average minimum streamflow, and low-flow index duration and frequency. This information is used in the correlation analysis with 18 basin factors and 3 climate change factors to identify the basin area, average basin altitude, average basin slope, water system density, runoff curve number, annual evapotranspiration, and annual precipitation in the low-flow index regression model. This study evaluates the model's accuracy by using the root-mean-square error (RMSE) and the mean absolute error (MAE) for 10 ungauged, verified basins and compares them with the previous model's low-flow calculations to determine the effectiveness of the newly developed model. Comparative analysis indicates that the new regression model produces average low-flow, attributed to the consideration of varied basin and hydrologic factors during the new model's development.

• Journal of ILASS-Korea
• /
• v.24 no.3
• /
• pp.122-129
• /
• 2019

Flow uniformity in aftertreatment system is an important factor in determining uniform catalytic reaction and filtration. In this study, variety types of DOC-DPF system design were analyzed to increase flow uniformity. For this analysis, ANSYS Fluent was used with porous media setup for DOC and DPF. Turbulent flow was modeled by standard $k-{\varepsilon}$ model excepting porous media. Uniformity index was utilized to evaluate the flow uniformity quantitatively. Reference design showed low velocity region because two large vortex were generated before baffle. When radius of DOC-DPF system was increased, exhaust pressure acting on the inlet decreases and velocity distribution was shifted to one side. When inlet pipe was set to axial center of DOC-DPF system velocity distribution was symmetric. However, flow was not dissipated until the front end of DOC and showed higher uniformity index. When the volume of DOC was reduced while fixed volume of entire DOC-DPF system and baffle plate is located downstream of the DOC-DPF system, there was improvement in uniformity index.

• Journal of Climate Change Research
• /
• v.7 no.4
• /
• pp.407-419
• /
• 2016

The low flow is the necessary and important index to establish national water planning, however there are lots of uncertainty in the low flow estimation. Therefore, the objectives of this study are to assess the climate change uncertainty and the effects of hydrological models on low flow estimation. The 5 RCMs (HadGEM3-RA, RegCM4, MM5, WRF, and RSM), 5 statistical post-processing methods and 2 hydrological models were applied for evaluation. The study area were selected as Chungju dam and Soyang river dam basin, and the 30 days minimum flow is used for the low flow evaluation. The results of the uncertainty analysis showed that the hydrological model was the largest source of uncertainty about 41.5% in the low flow projection. The uncertainty of hydrological model is higher than the other steps (RCM, statistical post-processing). Also, VIC model is more sensitive for climate change compared to SWAT model. Therefore, the hydrological model should be thoroughly reviewed for the climate change impact assessment on low flow.

• STI Policy Review
• /
• v.1 no.2
• /
• pp.51-68
• /
• 2010

This paper compares OECD nations by developing a comprehensive evaluation index that examines the efforts and achievements of countries toward Low-Carbon Green Growth. The input-process-output of a Low-Carbon Society system is in dynamic competition with that of a High-Carbon Society system. The model used in this study of the comprehensive evaluation index for Low-Carbon Green Growth was comprised of Large indices such as Input, Process, and Output. The Input and Output consisted of 'Social-economic' and 'Physical-ecological' Middle indices while the Process was made up of 'Stimulation mechanisms' and 'Participation of stakeholders and Knowledge flow' Middle indices. In order to calculate the comprehensive evaluation index, our model gave a weight to each indicator/index and applied a weighted arithmetic mean. Korea ranked $15^{th}$ out of 30 OECD nations in the comprehensive evaluation that analyzed Input ($14^{th}$), Process ($18^{th}$), and Output ($17^{th}$). The top five nations were Switzerland, Sweden, Denmark, Germany, and France; while Japan was $8^{th}$ and the USA $26^{th}$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.3
• /
• pp.554-558
• /
• 1999

Flow properties of traditional kochujang at various fermentation times(0~12 weeks) were determined with rotational cylindrical(RC) and serrated plate plate(PP) viscometer. Magnitudes of consistency index(K) of power law model and Cassson parameters(yield stress and viscosity) measured by PP viscometer were higher than those using RC viscometer. All kochujang samples during fermentation were much shear thinning with values of flow behavior index(n) as low as 0.2~0.34. K value and Casson yield stress measured by PP viscometer had good correlations(r=0.94; r=0.91) with fermentation time. No significant changes in flow model parameters measured by RC viscometer were observed for kochu jang during fermentation. Magnitudes of flow model parameters measured by PP viscometer more closely correlated with fermantation times of kochujang than did RC viscometer.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.05b
• /
• pp.685-690
• /
• 2002

• Journal of Korea Water Resources Association
• /
• v.43 no.4
• /
• pp.325-336
• /
• 2010

This study presents the alteration of flow regime by effects of dams and water use in the Geum River Basin. The surface water use rate and the Impounded Runoff (IR) index were examined to assess the pressure indicators of the flow alteration. We applied the flow duration curve, flow regime coefficient, flood and low-flow frequency analysis as well as Range of Variability Approach (RVA) to investigate the quantitative changes in natural flow regimes. The results indicate that the high flow decreased and low flow increased respectively compared to the natural flow regimes at eight gauging stations. The Geum river is regulated by 139 dams and reservoirs storing 24% of the annual mean discharge and has high surface water use rate of 36%. These indicators are main pressure factors to alter flow regimes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.4
• /
• pp.669-680
• /
• 2017

This study evaluated the consistency of the standard flow to forecast low-flow based on various drought indices. The data used in this study were streamflow data at the Gurye2 station located in the Seomjin River and the Angang station located in the Hyeongsan River, as well as rainfall data of nearby weather stations (Namwon and Pohang). Using streamflow data, the streamflow accumulation drought index (SADI) was developed in this study to represent the hydrological drought condition. For SADI calculations, the threshold of drought was determined by a Change-Point analysis of the flow pattern and a reduction factor was estimated based on the kernel density function. Standardized runoff index (SRI) and standardized precipitation index (SPI) were also calculated to compared with the SADI. SRI and SPI were calculated for the 30-, 90-, 180-, and 270-day period and then an ROC curve analysis was performed to determine the appropriate time-period which has the highest consistency with the standard flow. The result of ROC curve analysis indicated that for the Seomjin River-Gurye2 station SADI_C3, SRI30, SADI_C1, SADI_C2, and SPI90 were confirmed in oder of having high consistency with standard flow under the attention stage and for the Hyeongsan River-Angang station, SADI_C3, SADI_C1, SPI270, SRI30, and SADI_C2 have order of high consistency with standard flow under the attention stage.