• 대한기계학회논문집A
• /
• 제41권3호
• /
• pp.225-232
• /
• 2017

런너, 흡출관 등 양수발전소 수차 부속기기들에 캐비테이션 침식과 피로 균열 등의 손상 발생과 관련하여 많은 정비 사례들이 보고되고 있다. 양수발전소는 급전, 전력계통 안정 등과 같은 부수적 서비스를 제공한다. 이러한 부수적 서비스는 가이드 베인을 작게 열고 운전하는 저개도율 운전을 반복적으로 자주 수행하게 한다. 이러한 저개도율 운전은 수차 부속기기의 손상을 가속시키는 것으로 경험적으로 알려져 있다. 본 연구에서는 양수발전소의 가이드 베인 저개도율 운전이 수차의 캐비테이션과 피로를 가속시키는 효과를 유한요소 유동/응력 해석 및 피로 해석을 통해 정량적으로 평가한다. 평가 결과, 가이드 베인 개도율이 작을수록 캐비테이션 발생 가능성과 수차 효율 저하 가능성이 증가하며, 런너 블레이드 루트부에 최대 응력값을 증가시킴에도 불구하고 저개도율 운전이 피로수명에 미치는 영향은 미미함을 확인하였다.

• 대한기계학회논문집A
• /
• 제36권10호
• /
• pp.1267-1274
• /
• 2012

가이드 베인은 수력발전소 수차에 공급되는 물량을 제어하는 핵심적인 역할을 수행한다. 가이드 베인 베어링 부슁에 발생하는 마모와 관련하여 많은 정비 사례들이 보고되고 있다. 수력발전소의 중요기능인 주파수 조정, 급전 등과 같은 부수적 서비스는 가이드 베인을 작게 열고 운전하는 저개도율 운전을 반복적으로 수행하게 한다. 이러한 저개도율 운전은 가이드 베인 베어링 부슁의 마모율을 증가시키는 것으로 경험적으로 알려져 있다. 본 연구에서는 수력발전소의 가이드 베인 저개도율 운전이 가이드 베인 베어링 부슁의 마모를 가속시키는 효과를 유한요소 유동/응력 해석 및 상대적인 마모 평가를 통해 정량적으로 평가한다. 평가 결과, 가이드 베인 개도율이 작을수록 가이드 베인면에 작용하는 압력이 증가하고 가이드 베인 스템 외면과 베어링 부슁 내면 사이의 접촉길이는 감소하였으며 베어링 부슁 표면에 작용하는 접촉압력이 크게 발생하여 상대적으로 마모량이 증가함을 확인하였다.

• 한국전자통신학회논문지
• /
• 제10권1호
• /
• pp.73-80
• /
• 2015

화학공장과 같이 위험지역에 설치된 밸브장치는 폭발의 위험을 방지하기 위해 방화 방폭장치로 밀폐되어 있다. 본 논문에서는 방폭장치로 인해 외부전원장치를 사용할 수 없는 밸브장치에 적외선센서와 Zigbee 센서를 이용하여 위험지역의 밸브의 열림도를 측정하여 개폐여부를 확인하고, 밸브 개폐 작동시간을 로그화하여 운전 관리자가 공장을 관리 통제할 수 있는 저전력 모니터링 시스템을 제안한다. 전력관리기능을 적용하기 위해 개선된 비동기LPL 알고리즘을 적용한 전력제어 릴레이보드를 개발하고, 이를 적용한 방폭형 지능형 밸브시스템과 공장 밸브 개폐모니터링 시스템을 설계하고 이를 구현 및 테스트 하였다.

• International journal of advanced smart convergence
• /
• 제9권1호
• /
• pp.154-162
• /
• 2020

We studies show that ratio of corpse among cremated bodies in public cremation facilities in metropolitan cities using E-Haneul funeral information system is average 90.1%, which is high, in bigger metropolitan cities with over 2 million of population (Incheon, Busan, and Daegu), but is average 81.4%, which is relatively low, in smaller metropolitan cities with less than 2 million of population(Daejeon, Gwangju, and Ulsan). In addition, the cremated bodies ratio of opening remains is average 17.4% in smaller metropolitan cities with less than 2 million of population, but is average 8.9% in those with over 2 million of population, which is relatively low. Finally, the cremated bodies ratio of dead fetuses is average 1.2% in smaller metropolitan cities with less than 2 million of population, and average 1.0% in those with over 2 million of population, which is low. Based on the above result, we are the following suggestions to improve the effectiveness of funeral facility use by the increase of demand for public cremation facilities in metropolitan cities. First, Busan and Daegu, where the shortage of supply is expected due to the increase of demand for cremation of corpse, need to implement supply expansion policy of public cremation facilities to build or expand cremation furnaces. Second, Daejeon, Gwangju, and Ulsan, where the cremated bodies ratio of corpse is low, need to expand supply through expanded operation from existing 4~8 cremation numbers of public cremation facilities to 11 cremation numbers, which is the level of Seoul Metropolitan City. Third, there should be cremation furnaces exclusively for opening remains to prepare the increase of demand for opening remains in the years with leap month.

• The Korean Journal of Pain
• /
• 제26권4호
• /
• pp.392-395
• /
• 2013

Epiduroscopy is very useful in the treatment of not only low back pain caused by failed back surgery syndrome, epidural scar or herniated disc but also by chronic refractory low back pain which does not respond to interventional conservative treatment including fluoroscopically-directed epidural steroid injections and percutaneous adhesiolysis. Because cauterization using a laser fiber has become recently available, a wider opening is required to enter into the sacral canal in the case of epiduroscopic laser neural decompression (ELND). However, in a few patients, it is difficult to insert a device into the epidural space due to stenosis around the opening, and there is no alternative method. Herein, we report a case where a hiatus rasp specially designed for such patients was used to perform the operation.

• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.78-84
• /
• 2022

An air circuit breaker (ACB) is an electrical protection device that interrupts abnormal fault currents that result from overloads or short circuits in a low-voltage power distribution line. The ACB consists of a main circuit part for current flow, mechanism part for the opening and closing operation of movable conductors, and arc-extinguishing part for arc extinction during the breaking operation. The driving mechanism of the ACB is a spring energy charging type. The faster the contact opening speed of the movable conductors during the opening process, the better the breaking performance. However, there is a disadvantage that the durability of mechanism decreases in inverse proportion to the use of a spring capable of accumulating high energy to configure the breaking speed faster. Therefore, to simultaneously satisfy the breaking performance and mechanical endurance of the ACB, its driving mechanism must be optimized. In this study, a dynamic model of the ACB was developed using the MDO(Mechanism Dynamics Option) module of CREO, which is widely used in multibody dynamics analysis. To improve the opening velocity, the Taguchi design method was applied to optimize the design parameters of an ACB with many linkages. In addition, to evaluate the improvement in the operating characteristics, the simulation and experimental results were compared with the MDO model and improved prototype sample, respectively.

• Journal of Chest Surgery
• /
• 제13권2호
• /
• pp.130-133
• /
• 1980

Since the first report of an operation for prolapsed intervertebral disk by Mixter and Barr[1934], many thousands of operations have been successfully performed without incident. Linton and White in 1945 reported the vascular complication, but perforation of large vessels is rare complication of operation for prolapsed disk. A medical student, aged 22 years, was performed to a disk operation [L4-5, Rt. on May 1977.] From postoperative 10th day, palpitation, generalized edema and substernal pain were noted, and 2 months later, wide pulse pressure [70-80 mmHg], continuous bruit and thrill on the Rt. low abdomen were followed. Aortography revealed arteriovenous fistula between just proximal to abdominal aortic bifurcation and inferior vena cava. So, fistulectomy [Resection of proximal 2 cm of C.I.A., Rt, including fistula opening and end to end anastomosis] was performed on July, 77. During follow up study, remained fistula between Rt. internal lilac artery and lilac vein was found 2 months later. Re-operation [Double ligation of the Rt. internal lilac artery] was don on January 1978. Postop. results were excellent, except impossible to ejaculation.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.445-451
• /
• 2016

General fuse elements of solution for fast acting operation characteristics made using silver or silver alloy, those are not able to dominate cost competition to the advanced global leaders that have not only high technology but competitive price. In this study, the method that compose the fuse elements manufactured solution of fast acting operation characteristics by using precision multi-layer thin film plating and helical cutting process from low-priced copper metal. Furthermore, in order to move rated current line of fuse due to the heat loses, the manufacture construction method of fixed resistor is introduced, and then Ni-P plating layer and Sn plating layer are introduced multiply for controling fine opening time characteristics. So this study can establish the high productive and low-priced production method.

• Journal of Chest Surgery
• /
• 제12권3호
• /
• pp.233-239
• /
• 1979

Ventricular septal defect associated with patent ductus arteriosus is well known cardiac anomaly that can be treated successfully by operation. This anomaly is found at low frequency. Seven cases of the combined malformation were operated on during the period from 1959 to 1978 in the Department of Thoracic Surgery, Seoul National University Hospital. Right heart catheterization and retrograde aortogram can diagnose the disease correctly. Staged operation in one case and one-stage operation in 5 patients were done. In all cases of the open heart surgery the closure of the ductus was done by transpulmonary suture of the PDA opening. Among 6 patients of the open heart surgery 2 operative death [33.3%] and one late death [total 50%] were noted. Four type II and one type I and one Type IV VSDs were found. In one case the anomaly was accompanied with aortic insufficiency by herniation of the right coronary cusp through Type I VSD.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.477-480
• /
• 2005

In this paper, we propose a preprocess method to needs for Car License Plate Recognition on poor environment. This preprocess method use multi images to get low value to compare images value. Last method was Opening operation that Using Edge pixel to add and subtraction. The Result was removed White pixel and very mini feather. But This method needs many process times and License Plate Recognition is low quality problem. Another method is median filter and conversion. This paper key idea that rain & snow is high value. So This paper propose get low value to compare image value.