• 오토저널
• /
• 제26권1호
• /
• pp.52-56
• /
• 2004

• 오토저널
• /
• 제23권6호
• /
• pp.48-51
• /
• 2001

• 오토저널
• /
• 제26권6호
• /
• pp.36-38
• /
• 2004

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.277-282
• /
• 2006

With the aim of achieving half the regulated value of EURO-3 Emission Regulations, an ultra low emission motorcycle has been developed based on a motorcycle with an 1800 $cm^3$, horizontal opposed 6-cylinder engine. For the fuel supply system, an electronically controlled fuel injection system was applied. For the emission purification system, three-way catalysts, a feedback control system with a LAF(Linear Air-Fuel ratio) sensor, and a secondary air induction system were applied. To reduce CO and HC emissions during cold starting, an early catalyst activation method combining RACV(Rotary Air Control Valve) and retarded ignition timing was applied. After the catalyst activation, air-fuel ratio was controlled to maximize the purification ratio of the catalyst according to vehicle speed. For the air-fuel ratio control system, the LAF sensor was used. Furthermore, fine adjustment by the LAF feedback control reduced torque fluctuation due to the air-fuel ratio change. As a result, smooth ride feeling was maintained. Owing to these technologies, half the regulated value of EURO-3 has been achieved without any negative impact to the large-scaled motorcycles' drivability. This paper presents the developed ultra low emission technologies including the control method using an LAF sensor.

• 한국분무공학회지
• /
• 제21권4호
• /
• pp.214-222
• /
• 2016

Changes in road infrastructure affect driving patterns and pollutant emission characteristics. we analyzed the changes in driving patterns and pollutant emission characteristics of the driving route via measured driving patterns at year 2009 and 2016. Since 2009, there has been an increase in population and traffic demand, including residential areas and industrial facilities. Traffic conditions were improved such as the opening of the highway Inter-Change to Seoul and the construction of underground driveway. As a result, the average vehicle speed increased. More detail comparisons have made on the changes of the underground driveway section and the crossroad section, which are expected to have significant changes in the transportation infrastructure. The vehicle speed distribution of the underground driveway changed from low speed to high speed, and the increase of the time spent at the high speed and high load caused the increase of NOx emissions. The vehicle speed also increased at the crossroad section, and the consequence NOx and $CO_2$ emissions decreased. It is mainly because the decreased time spent at idle, which results from the proper traffic demand management at this area.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.628-632
• /
• 2007

The purpose of study is to confirm a acceptable range of data errors in data collecting. To examine a acceptable range of data errors, emission level is calculated for a vehicle flow and heavy vehicle percentage as a function of small-sized velocity. According to road selected, noise level of detail influence road noise calculations. It can be concluded that a vehicle flow raised an error less than 5000(veh/h) for a maximum error in emission level of 3.01dB, and the more a heavy vehicle percentage have a low value, the more emission level is a slight difference. This analysis gives insight regarding the accuracy of traffic flow data that is needed to reach a certain level of accuracy for the resulting noise level.

• 한국대기환경학회지
• /
• 제32권3호
• /
• pp.280-288
• /
• 2016

Greenhouse gas (GHG) emissions have given rise to climate change which is one of the most serious environmental challenges that the world faces today. In response, Republic of Korea has proposed "Low Carbon, Green Growth" as a new economic paradigm accompanying with the ultimate aim of building a sense of responsibility for the environment. Korean government has set the ambitious national GHG emission reduction target which aims 37% reduction in the business-as-usual (BAU) level of 2030. The transportation sector plays a key role in this target. In the transportation sector, the GHG reduction target of 34.3% in the BAU level by 2020 has been allocated in order to consider the industrial specificity. Furthermore, it is known that the GHG reduction in the transportation sector has relatively minimal side effects compared to those of other sectors. In order to meet this national GHG reduction target, Korean government has set $CO_2$ emission regulation of vehicle for 2020. The purpose of this study is to evaluate the reduction effects by the average GHG regulation of vehicles. $CO_2$ emissions, between 2009 and 2013 were analysed by reduction measure such as technology improvement, light-weight, segment shift, diesel vehicle sales. During this period, $CO_2$ of vehicle was reduced every year by 19.9 g/km (i.e., 3.3% reduction per year). $CO_2$ reduction of imported vehicle is greater than domestic vehicle because of segment shift toward small size vehicle and higher diesel vehicle sales.

• 한국대기환경학회지
• /
• 제17권3호
• /
• pp.233-240
• /
• 2001

The composition of volatile organic compounds (VOCs) was anlyzed for major emission sources such as vehicle exhaust, gasoline and diesel vapor, organic solvent vapor, and butane fuel gas. Low carbon-numbered hydrocarbons were found to be the dominant components of gasoline vehicle exhaust. In gasoline evaporative vapor, the predominant constituents were found to be butane and iso-pentane regardless of ambient air temperature. In case of diesel evaporative vapor was similar to those of gasoline evaporative vapor. The composition of organic solvent vapor from painting, ink and petroleum consisted mostly or aromatic compounds such as toluene and m, p, o-xylene. The hydrocarbon fraction of butane fuel gas. which is used by portable bunner, consisted mainly of propane (34%) and butane(70%).

• 한국전자파학회논문지
• /
• 제24권8호
• /
• pp.798-804
• /
• 2013

본 논문에서는 고주파 회로 모델링을 이용하여 전기자동차의 LDC로부터 방출되는 전도성 전자파 잡음을 시스템-레벨에서 분석하였다. 관련 전도 방출의 주요 원인은 LDC에서 사용하는 펄스폭 변조 방식의 100 kHz 스위칭 동작에 기인하며, 이러한 전도 방출은 공통-임피던스 결합 및 유도성 결합을 통해 AM/FM 주파수 대역에서의 무선주파수 간섭을 유발한다. 이러한 문제를 분석하기 위해 LDC를 구성하고 있는 MOSFET과 고압 커패시터, 고전압 케이블과 버스 바에 대한 기본 회로는 물론, 각 부분에서 존재하는 기생 성분 및 비선형 특성을 해석하여 LDC 전체를 포함한 시스템-레벨의 고주파 등가회로 모델을 제안하였다. 이러한 모델을 이용하여 시뮬레이션과 측정을 비교하여 유사성을 검증하였다. 향후 이러한 접근 방법이 전기자동차의 전자파 적합성 설계에 효과적으로 사용될 수 있을 것으로 기대한다.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.84-91
• /
• 2008

Due to increasing need for better emission characteristics and lower fuel consumption rate in automotive engines, alternative fuels are drawing more attentions recently. The GTL (gas to liquid) is the one of most favored candidates. In this study, emission characteristics are compared between diesel and GTL fuel in commercial 2.0 liter diesel engine and vehicle with CRDi(Common Rail Direct injection) system. The effects of injection timings on emission and fuel consumption rate are compared at various engine speeds and loads. Noticeable reduction in HC, CO and PM emissions are observed due to higher cetane number and low sulfur and aromatic contents in GTL. On the trade-off curve of NOx and PM(Particulate matter) GTL showed much more benefits than diesel, where about 30% of PM mass decreased at the same operating conditions. On CVS 75 mode test in vehicle, GTL showed an excellent emission enhancement, in which 50% of HC, 21% of PM, and 12% of NOx engine-out emissions are decreased compared to ULSD(Ultra low sulfur diesel) fuel.