• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.283-287
• /
• 1989

This paper presents a microprocesser based Self-Controller for a Permanent Magnet Synchronous Motor(PMSM), fed by voltage soure inverter. The proper operation of the PMSM can be ensured only if the stator current is always synchronized with the its Back-E.M.F. The use of incremantal encoder with high resolution makes it possible to design a Self-Control led P.W.M. inverter. The pulse ratios are controlled to reduce the torque ripple in the low-speed drive region. And during the operation, torque - speed characteristics are improved by the control of optimal load angle.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.537-538
• /
• 2008

A step-down DC-DC converter with On-chip Compensation for battery-operated portable electronic devices which are designed in 0.18um CMOS standard process. In an effort to improve low load efficiency, this paper proposes the PFM (Pulse Frequency modulation) voltage mode 1MHz switching frequency step-down DC-DC converter with on-chip compensation. Capacitor multiplier method can minimize error amplifier compensation block size by 20%. It allows the compensation block of DC-DC converter be easily integrated on a chip and occupy less layout area. But capacitor multiplier operation reduces DC-DC converter efficiency. As a result, this converter shows maximum efficiency over 87% for the output voltage of 1.8V (input voltage : 3.3V), maximum load current 500mA, and 0.14% output ripple voltage. The total core chip area is $mm^2$.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.16-22
• /
• 2013

This paper presents the analysis and optimization of air-core permanent magnet linear synchronous motor with overlapping concentrated windings to achieve high thrust density, high thrust per copper losses and low thrust ripple. For the motor design, we adopt equivalent magnetizing current (EMC) method to analyze the magnetic field and give analytical formulae for calculation of motor parameters such as no-load back EMF, dynamic force, thrust density and thrust per copper losses. Further, we proposed a multi-objective optimization by genetic algorithm to search for the optimum parameters. The design optimization is verified by 2-D Finite Element analysis (FEA).

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권6호
• /
• pp.425-429
• /
• 2014

This paper proposes a DC-DC Buck-Converter with DT-CMOS (Dynamic Threshold-voltage MOSFET) Switch. The proposed circuit was evaluated and compared with a CMOS switch by both the circuit and device simulations. The DT-CMOS switch reduced the output ripple and the conduction loss through a low on-resistance. Overall, the proposed circuit showed excellent performance efficiency compared to the converter with conventional CMOS switch. The proposed circuit has switching frequency of 1.2MHz, 3.3V input voltage, 2.5V output voltage, and maximum current of 100mA. In addition, this paper proposes a SCP (Short Circuit Protection) circuit to ensure reliability.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.348-351
• /
• 2006

연료전지로부터의 낮고 변동폭이 큰 전압을 안정되게 승압시키기 위하여 부스트 컨버터가 사용되고 있으며 전기적인 절연이 요구되지 않는 응용에서는 손실, 가격 및 부피 상승의 원인이 되는 고주파변압기가 없는 무변압기형의 부스트 컨버터가 장점을 갖는다. 본 논문에서는 $6{\sim}8$배의 실제 사용 가능한 승압비를 가지며 입출력 전류리플이 매우 작은 새로운 무변압기형 부스트 컨버터를 제안하고 모의실험을 통하여 그 타당성을 검증한다.

• 전력전자학회논문지
• /
• 제7권5호
• /
• pp.490-498
• /
• 2002

본 논문에서는 전압형 PWM 컨버터의 교류 입력측 LCL 필터의 설계기법을 제안한다 기존의 전압형 PWM 컨버터에서 전원계통으로 흘러 들어가는 스위칭 고조파전류를 억제하기 위해 교류 입력측에 LCL 필터를 설치하는 것은 매우 경제적이고 효과적인 방법이다 필터 커패시터로 스위칭 고조파전류를 흡수하며 공진을 억제하기 위해 수동 댐핑 저항을 이용한다 UPS용의 LCL 필터 구조 PWM 컨버터의 설계예시를 보였으며 제안한 설계기법의 타당성을 입증하기 위해 PSIM을 이용한 시뮬레이션을 행하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.506-509
• /
• 2002

In this paper, a design method of LCL filter at the AC input side of a voltage source PWM converter is proposed. Effective method to prevent pollution of the utility caused by high frequency current ripple is to use a LCL filter instead of the L filter The C elements in the filter provide a low impedance path for the high frequency component, preventing them from entering the utility. A resistor in series with a capacitor is used for damping the resonance in the filter. The design examples are shown and the validity of the proposed design method is verified through the PSIM simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.93-97
• /
• 1988

The sliding mode control is an effective method to establish robustness against parameter variations and disturbance. But, in sliding mode strategy, the control function is discontinuous on the hyperplane. Consequently, the control input chatters at high frequency. When we apply such a control to the induction motor drive system, that causes a torque ripple and current harmonics, which are harmful to the system. In this paper, we introduce a low pass filter between sliding mode control output and driver input to overcome that problem. The band-width of this filter is varied according to the error funtion to improve transient responses.

• 전자공학회논문지B
• /
• 제30B권11호
• /
• pp.93-101
• /
• 1993

The transfer function of vector-controlled induction motor is represented along with both unstructured and structured uncertainty such as the error of rotor time constant and current ripple. The low-pass-filter behavior of a magnetizing inductance gets rid of unstructured uncertainty in the transfer function. The robust controller to compensate variation of the transfer function is designed using simple P-I linear controllers. The coefficients of speed PI controller are determined from an overshoot and a rising time of system and the coefficients of model-following PI controller are obtained using the solution of Riccati equation of LQR control in the state space equation of the error system. Experimental results with the DSP-based model-following robust controller are shown a good robustness against the structured uncertainty of the motor.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.6-8
• /
• 2018

긴 수명과 높은 효율로 차세대 조명기구로 사용되는 LED를 구동하기 위하여, 일반적으로 역률 보정을 위한 PFC 단과 출력 조절을 위한 DC/DC 단이 직렬로 연결된 구조를 사용하게 된다. 이때 PFC 과정에서 DC 링크 전압이 120Hz 전압 맥동을 갖게 되는데, 이는 DC/DC 단에도 영향을 주며 최종 출력전류 역시 120Hz 저주파 맥동을 갖게 된다. 본 논문은 LED 조명용 LLC 공진 컨버터의 120Hz 저주파 맥동 전류 리플을 저감 방법에 관한 연구이다. 기존 제어기에 전류 리플을 보상하여 제어하는 방법에 대하여 설명하고 시뮬레이션을 통해 이를 확인한다.