• 한국안전학회지
• /
• 제26권3호
• /
• pp.69-74
• /
• 2011

Despite most of tasks in manufacturing, construction and agriculture, etc., were currently mechanized and automated, manual materials handling still existed in atypical working condition. In case of manual materials handling, repetitive work, inappropriate working posture, excessive force, contact stress might cause overload, which could lead to work-related musculoskeletal disorders and low back pains. On this basis, the goal of this study is to reveal the effects of various lifting postures of trunk angles and lower extremity postures on maximum holding time(MHT). Twenty two subjects were recruited from a university population. The experiment was designed by a combination of three trunk angle ($0^{\circ}$, $20^{\circ}$, $60^{\circ}$) and three lower extremity postures(straight, bent, kneeling). Before experimental trials, subjects performed MVC(maximum voluntary contraction) exertions in three trunk angles ($0^{\circ}$, $20^{\circ}$, $60^{\circ}$) to calculate 30%MVC at designated postures. In each trial, they were required to hold the handheld load(30%MVC) for a designated posture as long as they could. The results of MVC by trunk angles were measured in $0^{\circ}$ > $20^{\circ}$ > $60^{\circ}$ orders, but those of MHT measured in $20^{\circ}$ > $0^{\circ}$ > $60^{\circ}$ orders. These results showed that straight posture is the ideal working posture in work exerted a strong force for a short time, but the ability to work might be improved in the trunk angle $20^{\circ}$ in work required 30%MVC for a long time. Also, results of MVC and MHT by lower extremity postures measured in straight > bent > kneeling orders.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.599-610
• /
• 2016

본 연구는 미숙아와 어머니를 대상으로 캥거루 케어 효과를 비교하기 위해 수행된 체계적 문헌고찰 및 메타분석 연구이다. 2015년 2월까지 출간된 무작위 임상실험연구를 검토하였으며, 국내문헌은 연구설계수준에 따른 제한 없이 비무작위 임상실험연구를 포함하였다. 문헌은 Ovid-Medline, CINAHL, PubMed와 국내 DB인 KoreaMed, 국립중앙도서관, 국회도서관, 국가과학기술전자도서관, KISS, RISS, 한국의학논문을 통해 ((kangaroo OR KC OR skin-to-skin) AND (care OR contact)) AND (infant OR preterm OR Low Birth Weight OR LBW), ((캥거루 OR 캉가루 OR 캉가루식) AND (케어 OR 간호 OR 관리 OR 돌보기 OR 피부접촉)) 등을 주요어로 조합하여 검색하였으며, 선택배제과정을 거쳐 최종 25편(n=3051)의 문헌이 분석에 포함되었다. 문헌에 대한 질평가는 SIGN에서 제시한 평가도구를 사용하였으며, 질평가 결과는 16편에서 ++, 9편에서 +로 평가되어 전반적으로 비뚤림 위험은 없는 것으로 판단하였다. 미숙아를 대상으로 한 캥거루 케어의 효과에 대한 메타분석 결과, 미숙아 사망률, 중증 감염/패혈증 발생률, 저체온 발생률, 병원입원기간, 모유수유율, 수면상태, 어머니의 불안, 어머니 역할수행 자신감, 어머니 역할수행 만족도에서 통계적으로 유의한 효과가 있었으며, 고체온 발생률, 미숙아의 성장발달(신장, 체중), 모아애착, 우울, 스트레스는 유의미한 차이가 없었다. 국내에서 캥거루 케어에 대한 무작위 임상실험연구 수가 적어 효과크기에 대한 확증적 결과를 얻는 데에는 다소 제한이 있었으므로 향후 이와 관련된 무작위 임상실험연구의 효과검증에 대한 노력이 지속적으로 이루어져야 할 것으로 사료된다.

• 폴리머
• /
• 제37권4호
• /
• pp.455-461
• /
• 2013

다양한 광택을 지닌 우레탄-아크릴 코팅 표면에 일정 하중을 부하하여 긁힘 거동 및 긁힘 시인성을 조사하였다. 비교적 낮은 응력이 코팅 표면에 부하될 수 있도록 면 접촉이 가능한 스크래치 팁을 이용하여, 코팅 표면에 긁힘 손상을 생성시켰다. 생성된 긁힘 손상을 기존 평가법인 광택도 및 휘도 변화량으로 평가 시, 광택도가 동일한 코팅 표면은 일정 하중이 증가함에 따라 광택도와 휘도 변화량이 증가됨을 확인하였다. 하지만, 이 평가법들은 광택이 서로 다른 시험편들의 긁힘 손상을 비교 평가하기에는 부적합하였다. 왜냐하면, 측정값과 긁힘 시인성이 서로 일치하지 않은 결과를 보였기 때문이다. 본 연구에서는 코팅 표면의 긁힘 손상을 정량적으로 평가할 수 있을 뿐 아니라, 코팅 표면에 무차원화된 광택도 및 휘도의 증가는 긁힘 시인성의 증가로 이어지는 상관관계를 설명할 수 있는 새로운 긁힘 평가법을 제안하였다.

• 대한토목학회논문집
• /
• 제41권5호
• /
• pp.523-531
• /
• 2021

일반적으로 기초는 여러 개의 단일말뚝이 상부 구조체에 의해 연결된 상태로 군말뚝을 의미한다. 하지만, 군말뚝에 상부 하중 재하 시 지반에 작용하는 응력 범위는 단일말뚝에 비해 더 넓은 폭과 깊이로 확장되고, 중복되기 때문에 전체적인 지지력은 감소할 수 있다. 이러한 지지력 감소비를 군말뚝 효율이라 하나 일반적인 말뚝과 지반의 접촉 조건에 따른 영향을 분석한 연구는 부족한 실정이다. 따라서 본 연구에서는 지반 구성 및 군말뚝의 배치, 간격, 지반과 말뚝간의 접촉 특성을 해석 변수로 설정하고, 군말뚝 효율 및 군말뚝을 구성하는 개별말뚝의 거동을 분석하였다. 해석 결과, 지반 종류에 따라 마찰계수 증가 시 군말뚝 효율은 수렴 또는 감소하는 경향을 보였으며, 이를 통해 최적 군말뚝 효율을 분석하였다. 또한, 개별말뚝 분석을 통한 하중 감소비 파악 결과, 군말뚝 내부에 위치한 말뚝의 경우 하중을 상대적으로 적게 받았으며, 이는 내부 지반에 대한 영향인 것으로 판단된다.

• 한국기계가공학회지
• /
• 제21권4호
• /
• pp.91-99
• /
• 2022

By applying METHOD 514.8 of the US military standard MIL-STD-810H, vibration analysis of the winding core automatic feeding device was performed during vehicle transportation. The contact point between the LM guide and main support frame was weak in the vertical axis, transverse axis, and longitudinal axis during the transportation of the automatic winding core feeder vehicle, and the maximum equivalent stress was 236.31 MPa in the longitudinal axis. When random vibration was applied, the safety margin in the longitudinal direction was 0.26, indicating low safety. The safety margin was changed by increasing the damage factor to 0.1. Finally, the safety margin was improved to 3.48 to secure safety. Resonance occurred with a Q factor of 9.34 in the harmonic response to which the RMS value of the ASD data was input, and the vertical axis safety margin was derived as 0.16. When the damping factor was 0.15, the Q factor was 3.37, and resonance was avoided with a safety margin of 6.62.

• Steel and Composite Structures
• /
• 제47권2호
• /
• pp.167-184
• /
• 2023

In this study, a new recentering friction device (RFD) to retrofit steel moment frame structures is introduced. The device provides both self-centering and energy dissipation capabilities for the retrofitted structure. A hybrid performance-based seismic design procedure considering multiple limit states is proposed for designing the device and the retrofitted structure. The design of the RFD is achieved by modifying the conventional performance-based seismic design (PBSD) procedure using computational intelligence techniques, namely, genetic algorithm (GA) and artificial neural network (ANN). Numerous nonlinear time-history response analyses (NLTHAs) are conducted on multi-degree of freedom (MDOF) and single-degree of freedom (SDOF) systems to train and validate the ANN to achieve high prediction accuracy. The proposed procedure and the new RFD are assessed using 2D and 3D models globally and locally. Globally, the effectiveness of the proposed device is assessed by conducting NLTHAs to check the maximum inter-story drift ratio (MIDR). Seismic fragilities of the retrofitted models are investigated by constructing fragility curves of the models for different limit states. After that, seismic life cycle cost (LCC) is estimated for the models with and without the retrofit. Locally, the stress concentration at the contact point of the RFD and the existing steel frame is checked being within acceptable limits using finite element modeling (FEM). The RFD showed its effectiveness in minimizing MIDR and eliminating residual drift for low to mid-rise steel frames models tested. GA and ANN proved to be crucial integrated parts in the modified PBSD to achieve the required seismic performance at different limit states with reasonable computational cost. ANN showed a very high prediction accuracy for transformation between MDOF and SDOF systems. Also, the proposed retrofit showed its efficiency in enhancing the seismic fragility and reducing the LCC significantly compared to the un-retrofitted models.

• 스트레스연구
• /
• 제25권2호
• /
• pp.93-97
• /
• 2017

본 연구는 대학생의 자기 주장성과 폭음 수준이 성폭력 피해를 예측하는지 알아보았고, 폭음 수준이 자기 주장성과 성폭력 피해 여부 간에 조절 역할을 하는지 탐색해 보았다. 대학생 405명이 연구에 참여하였고 익명성 보장을 위해 모바일 기반 설문 응답을 사용하였다. 설문지에 응답하지 않은 12명의 참여자를 제외한 393명(남: 161명, 여: 232명)의 자료를 분석하였다. 로지스틱 회귀분석을 통하여 자기 주장성, 폭음 수준, 자기 주장성과 폭음의 상호작용을 예측 변인으로, 성폭력 피해여부를 기준 변인으로 설정하여 분석하였다. 분석 결과 자기 주장성과 폭음 수준이 성폭력 피해 확률을 유의하게 예측하는 것으로 나타났다. 즉, 자기 주장성 수준이 낮을수록, 폭음 수준이 높을수록 성폭력 피해 확률이 유의함을 나타냈다. 또한 자기 주장성과 폭음의 상호작용이 성폭력 피해 확률을 유의하게 예측하였다. 상호작용에 대한 단순 주 효과 분석을 실시한 결과 폭음 수준이 낮은 집단의 경우 자기 주장성이 성폭력 피해 확률을 유의하게 예측한 반면, 폭음 수준이 높은 집단의 경우 자기 주장성이 성폭력 피해 확률을 유의하게 예측하지 않는 것으로 나타났다. 이러한 결과를 통하여 대학생의 성폭력 피해 예방을 위한 프로그램 적용 시 자기 주장성 훈련만이 아니라 건전한 음주 교육이 병행되어야 할 것을 제안하였다.

• 반도체디스플레이기술학회지
• /
• 제6권3호
• /
• pp.19-23
• /
• 2007

The NiSi is very promising candidate for the metallization in 45 nm CMOS process such as FUSI(fully silicided) gate and source/drain contact because it exhibits non-size dependent resistance, low silicon consumption and mid-gap workfunction. Ni film was first deposited by using ALD (atomic layer deposition) technique with Bis-Ni precursor and $H_2$ reactant gas at $220^{\circ}C$ with deposition rate of $1.25\;{\AA}/cycle$. The as-deposited Ni film exhibited a sheet resistance of $5\;{\Omega}/{\square}$. RTP (repaid thermal process) was then performed by varying temperature from $400^{\circ}C$ to $900^{\circ}C$ in $N_2$ ambient for the formation of NiSi. The process temperature window for the formation of low-resistance NiSi was estimated from $600^{\circ}C$ to $800^{\circ}C$ and from $700^{\circ}C$ to $800^{\circ}C$ with and without Ti capping layer. The respective sheet resistance of the films was changed to $2.5\;{\Omega}/{\square}$ and $3\;{\Omega}/{\square}$ after silicidation. This is because Ti capping layer increases reaction between Ni and Si and suppresses the oxidation and impurity incorporation into Ni film during silicidation process. The NiSi films were treated by additional thermal stress in a resistively heated furnace for test of thermal stability, showing that the film heat-treated at $800^{\circ}C$ was more stable than that at $700^{\circ}C$ due to better crystallinity.

• 대한의용생체공학회:의공학회지
• /
• 제24권5호
• /
• pp.401-410
• /
• 2003

본 연구에서는 유한요소법을 이용하여 대퇴골 전자간 골절 치료에 대한 다양한 수술기법을 골밀도 변화에 따라 생체역학적으로 분석하여 이를 평가하고자 한다. 이에 구현된 모델들은 압박 고관절 나사만을 이용하여 시술한 모델 (Type I), 삽입된 압박 고관절 나사 주위에 시멘트 영역을 확보한 뒤 골 시멘트로 보강하는 시술을 구현한 모델 (Type II),대학교추가의 골소실이 없이 시멘트를 가압하여 주입하는 시술을 구현한 모델 (TypeIII)의 3가지 형태로 구현하였다. 시술 상황에 따라 골절부위와 삽입물의 경계면 주위에 접촉요소를 사용하기 위해 적절한 마찰계수를 설정하였으며, 골다공증 정도 (Singh Indices, II∼V)에 따라 대퇴골의 물성치를 적절하게 적용시켰다. 각 모델에 있어 골밀도 변화에 따른 수술기법의 차이를 분석하기 위하여 다음과 같은 인자를 분석하였다 : (a) 대퇴골두 내에서의 von Mises 응력 부피비, (b) 대퇴골두 망상골과 인공 삽입물내에서의 최대 von Mises 응력 (PVMS), (c) 대퇴골두 내에서의 최대 von Mises 변형률 (MVMS), (d) 골절 부위와 인공 삽입물 주위에서의 미세운동량. 수술기법 중 Type III가 대퇴골두 내에서 골밀도 변화에 상관없이 가장 낮은 PVMS, MVMS 수치를 보여 가장 효율적인 결과를 나타내었다. 이는 기존 시술법 (Type I,II)에 비해 내고정 실패 가능성이 가장 적을 것으로 예측되었다. 특히, 골밀도가 낮을 때에는 Type III의 수술 효과가 더욱 커지는 것으로 나타났다. 또한, 삽입물 주위에서 미세운동량을 분석한 결과, Type III의 수치가 다른 시술법들의 15∼20%로 나타나 시멘트를 가 압하여 보강하는 시술법이 삽입물 주위의 미세운동을 억제하는데 있어 가장 효과적이다는 것을 증명하는 것이다. 이러한 결과로부터, 압박 고관절 나사를 이용한 대퇴골두 전자간 골절 치료에 있어 골 시멘트를 가압하여 보강하는 방법이 골밀도가 낮은 환자에 있어 인공삽입물의 내고정 및 골유합에 가장 큰 효과를 보일 것으로 사료된다.

• Asia pacific journal of information systems
• /
• 제20권3호
• /
• pp.167-190
• /
• 2010

The research conducted here focuses on the effect of factors that affect the behavior of UCC (User Created Content) website users, other than user's rational recognition of how useful a UCC website can be. Most discussions in the existing literature on information systems have focused on users' evaluation how a UCC website can help to attain the users' own goals. However, there are other factors and this research pays attention to an individual's 'personality,' which is stable and biological in nature. Specifically, I have noted here that 'extroversion' and 'neuroticism,' the two common personality factors presented in Eysenck's most representative 'EPQ Model' and 'Big Five Model,' are the two personality factors that affect a site's 'usefulness,' by this I mean how useful does the user consider the website and its content. How useful a site is considered by the user is the other factor that has been regarded as the antecedent factor that influences the adoption of information systems in the existing MIS (Management Information System) research. Secondly, as using or creating a UCC website does not guarantee the user's or the creator's extrinsic motivation, unlike when using the information system within an organization, there is a greater likelihood that the increase in user's activities in relation to a UCC website is motivated by emotional factors rather than rational factors. Thus, I have decided to include the relationship between an individual's personality and what they find pleasurable in the research model. Thirdly, when based on the S-O-R Paradigm of Mehrabian and Russell, the two cognitive factors and emotional factors are finally affected by stimulus, and thus these factors ultimately have an effect on an individual's respondent behavior. Therefore, this research has presented an assumption that the recognition of how useful the site and content is and what emotional pleasure it provides will finally affect the behavior of the UCC website users. Finally, the relationship between the recognition of how useful a site is and how pleasurable it is to useand UCC usage may differ depending on certain situational conditions. In other words, the relationship between the three factors may vary according to how much users are involved in the creation of the website content. Creation thus emerges as the keyword of UCC. I analyzed the above relationships through the moderating variable of the user's involvement in the creation of the site. The research result shows the following: When it comes to the relationship between an individual's personality and what they find pleasurable it is extroverted users who have a greater likelihood to feel pleasure when using a UCC website, as was expected in this research. This in turn leads to a more active usage of the UCC web site because a person who is an extrovert likes to spend time on activities with other people, is sensitive to new experiences and stimuli and thus actively responds to these. An extroverted person accepts new UCC activities as part of his/her social life, rather than getting away from this new UCC environment. This is represented by the term 'Foxonomy' where the users meet a variety of users from all over the world and contact new types of content created by these users. However, neuroticism creates the opposite situation to that created by extroversion. The representative symptoms of neuroticism are instability, stress, and tension. These dispositions are more closely related to stress caused by a new environment rather than this creatingcuriosity or pleasure. Thus, neurotic persons have an uneasy feeling and will eventually avoid the situation where their own or others' daily lives are frequently exposed to the open web environment, this eventually makes them have a negative attitude towards the web environment. When it comes to an individual's personality and how useful site is, the two personality factors of extroversion and neuroticism both have a positive relationship with the recognition of how useful the site and its content is. The positive, curious, and social dispositions of extroverted persons tend to make them consider the future usefulness and possibilities of a new type of information system, or website, based on their positive attitude, which has a significant influence on the recognition of how useful these UCC sites are. Neuroticism also favorably affects how useful a UCC website can be through a different mechanism from that of extroversion. As the neurotic persons tend to feel uneasy and have much doubt about a new type of information system, they actively explore its usefulness in order to relieve their uncomfortable feelings. In other words, neurotic persons seek out how useful a site can be in order to secure their own stable feelings. Meanwhile, extroverted persons explore how useful a site can be because of their positive attitude and curiosity. As a lot of MIS research has revealed that the recognition of how useful a site can be and how pleasurable it can be to use have been proven to have a significant effect on UCC activity. However, the relationship between these factors reveals different aspects based on the user's involvement in creation. This factor of creationgauges the interest of users in the creation of UCC contents. Involvement is a variable that shows the level of an individual's mental effort in creating UCC contents. When a user is highly involved in the creation process and makes an enormous effort to create UCC content (classed a part of a high-involvement group), their own pleasure and recognition of how useful the site is have a significantly higher effect on the future usage of the UCC contents, more significantly than the users who sit back and just retrieve the UCC content created by others. The cognitive and emotional response of those in the low-involvement group is unlikely to last long,even if they recognize the contents of a UCC website is pleasurable and useful to them. However, the high-involvement group tends to participate in the creation and the usage of UCC more favorably, connecting the experience with their own goals. In this respect, this research presents an answer to the question; why so many people are participating in the usage of UCC, the representative form of the Web 2.0 that has drastically involved more and more people in the creation of UCC, even if they cannot gain any monetary or social compensation. Neither information system nor a website can succeed unless it secures a certain level of user base. Moreover, it cannot be further developed when the reasons, or problems, for people's participation are not suitably explored, even if it has a certain user base. Thus, what is significant in this research is that it has studied users' respondent behavior based on an individual's innate personality, emotion, and cognitive interaction, unlike the existing research that has focused on 'compensation' to explain users' participation with the UCC website. There are also limitations in this research. Firstly, I divided an individual's personality into extroversion and neuroticism; however, there are many other personal factors such as neuro-psychiatricism, which also needs to be analyzed for its influence on UCC activities. Secondly, as a UCC website comes in many types such as multimedia, Wikis, and podcasting, these types need to be included as a sub-category of the UCC websites and their relationship with personality, emotion, cognition, and behavior also needs to be analyzed.