• 산업경영시스템학회지
• /
• 제18권35호
• /
• pp.39-46
• /
• 1995

This study is to find the optimal lot size method in the distribution system. In general, the lot size methods used in the distribution system is the same as the methods of the MRP system. The lot size methods used in this study are LFL, EoQ, LTC and POQ.. Resulting in case study, LTC is the optimal lot size method in the distribution system. In distribution system, VRP and VSP shall be investgated.

• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.126-133
• /
• 2014

This paper addresses order-lot pegging issues in the supply chain of a semiconductor business. In such a semiconductor business (memory or system LSI) order-lot pegging issues are critical to achieving the goal of ATP (Available to Promise) and on-time production and delivery. However existing pegging system and researches do not consider capacity limit on bottleneck steps. This paper presents an order-lot pegging algorithm for assigning a lot to an order considering quality constraints of each lot and capacity of bottleneck steps along the entire FAB. As a result, a quick and accurate response can be provided to customer order enquiries and pegged lot lists for each promised orders can be shown transparently and short or late orders can be detected before fixing the order.

• 산업경영시스템학회지
• /
• 제17권32호
• /
• pp.177-186
• /
• 1994

Economic Lot size decision is studied on this thesis foe the muti-product small batch production system. Even though economic lot size decision has been studied for the MRP system. this could be applied at the industry under the multi-product small batch production system because of very complicate and manager's lack of understand. Therefore, this technique is applied at the industry in order to minimize ordering cosy based on optimal quantity and period, and holding cost according to optimize inventory level under the muti-product small batch production system. After that, lot size decision technique is compared with lot size decision technique which has been used for analyzing and emphasizing productivity

• Journal of Information Processing Systems
• /
• 제15권6호
• /
• pp.1335-1349
• /
• 2019

Crowdsensing technologies can improve the efficiency of smart parking system in comparison with present sensor based smart parking system because of low install price and no restriction caused by sensor installation. A lot of sensing data is necessary to predict parking lot saturation in real-time. However in real world, it is hard to reach the required number of sensing data. In this paper, we model a saturation predication combining a time-based prediction model and a sensing data-based prediction model. The time-based model predicts saturation in aspects of parking lot location and time. The sensing data-based model predicts the degree of saturation of the parking lot with high accuracy based on the degree of saturation predicted from the first model, the saturation information in the sensing data, and the number of parking spaces in the sensing data. We perform prediction model learning with real sensing data gathered from a specific parking lot. We also evaluate the performance of the predictive model and show its efficiency and feasibility.

• 한국통신학회논문지
• /
• 제18권5호
• /
• pp.685-694
• /
• 1993

LOT(Lapped Transform)와 HVS(Human Visual System) 가중치를 이용하여 분류벡타 양자화기에 근거한 점진적 영상부호화 방법을 제안하였다. DCT변환을 이용한 기존의 블럭변환 영상부호화는 낮은 전송율에서 블럭화 현상이 심하게 나타난다. 본 논문에서는 영상블럭을 LOT로 변환하고 그 블럭들의 구조적 특성에 따라 네 부류로 분류한 다음 적응비트배정으로 재생 영상화질을 개선하기위해 HVS가중치를 갖는 LOT계수특성에 의해 서브벡타들로 나눈다. 이 서브벡타들을 벡타양자화하여 점진적으로 전송한다. 컴퓨터 시뮬레이션을 통한 부호화시험을 하여 점진적 전송에 의한 LOT/CVQ가 효율적인 전송임을 보이고 PIT/DCTVQ를 이용한 결과와 비교하였다.

• 한국농촌건축학회논문집
• /
• 제5권2호
• /
• pp.10-19
• /
• 2003

The purpose of this study was to analyze the formation and change of road-block-lot of the old inner city in cheongju The result of this study are as follows; (I)Among others a system roads of in around the old castle in cheongju city is most of feature north and south direction of road. Lot system is organic relations of north and south direction of road. Therefore, urban tissue in around the old castle in cheongju city is established order road system keep on the change of expansion urban tissue. (2) Block type classified into non-division, 2division and over 3division. (3) The square block remains mostly in Cheongju old castle, two-division block was around south of castle. And block of the grid-form street system divided into over 3 division. Through the guideline about characteristic of block type, residential area should be developed as a characteristics area in the urban area.

• 산업공학
• /
• 제24권3호
• /
• pp.241-247
• /
• 2011

This paper develops a mathematical model which searches an optimum lot size of a press line, and applies this model to the scheduling of the press line. This mathematical model is not a widely studied cost model but a model which considers the utilization of the press line under a lean production system. In this paper, the optimum lot size is a minimum lot size which does not exceed the total work time of the press line. A production volume and the priority of the production in the press line are adjusted using this optimum lot size. A mathematical model developed in this paper will allow determining the optimum lot size easily in case of variable production environments such as an introduction of a new product and a fluctuation of production volume of each item. Therefore, our model will make a better scheduling of the press line and will enhance the utilization of it.

• 한국농촌건축학회논문집
• /
• 제15권1호
• /
• pp.89-96
• /
• 2013

This study aims to clarify the transformation of urban spatial structure around old castle in cheong-ju city. The urban spatial structure is composed with road system, block division, and lot system with original cadastral map in 1913 and 2011 GIS. Transformation of road system is classified into control of road line, construction and extension of road. Construction of arterial road was divided into Nam-juro and Mang-sunro with 2 blocks and lot system was destoyed. Transformation of block has not been developed except 4 blocks. The 4 blocks were divided into east-west or north-south direction and became 8 blocks. Transformation of lot system is classified into maintained, subdivided, and destroyed lots in shape and size of lots. Maintained lots were found in large lot in size for public office and park. Subdivided lots were mainly represented with the existing main road, an active alleys, and so on. Destroyed lots by road construction and extension were showed in Nam-juro. Although all these transformations are used to enhance urban spatial structure. The old systems have remained around old castle in cheong-ju city.

• 한국전자거래학회지
• /
• 제9권2호
• /
• pp.123-143
• /
• 2004

현재 주차문제가 사회의 큰 문제로 자리잡고 있다. 자동차는 기하급수적으로 늘어가지만 그 자동차를 수용하는 공간은 상대적으로 좁다. 심지어 목적지에 주차를 할 공간이 없어 상당한 시간을 주차할 장소를 찾는데 소비하게 된다. 이동 차량에서 실시간 주차정보를 제공받아 이러한 문제점을 해소하고자 한다. 본 논문에서는 실시간 주차 정보를 제공 받기 위해 무선 네트워크 환경을 구축하고, 다양한 어플리케이션간에 데이터를 교환하고 공유하기 편리한 XML 데이터를 생성하여, 실시간으로 주차정보를 전달하는 방법을 제시 및 구현한다.

• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.187-192
• /
• 2014

Lot-streaming is the process of splitting a job (lot) into sublots to allow the overlapping of operations between successive machines in a multi-stage production system. A new genetic algorithm (NGA) is proposed for an n-job, m-machine, lot-streaming flow shop scheduling problem with equal-size sublots in which the objective is to minimize the total stretch. The stretch of a job is the ratio of the amount of time the job spent before its completion to its processing time. NGA replaces the selection and mating operators of genetic algorithms (GAs) by marriage and pregnancy operators and incorporates the idea of inter-chromosomal dominance and individuals' similarities. Extensive computational experiments for medium to large-scale lot-streaming flow-shop scheduling problems have been conducted to compare the performance of NGA with that of GA.