Time-loss injuries are still a major occurrence in Canada, injuring thousands of Canadian workers each year. With obesity rates on the rise across the country, as well as around the world, it is important that the possible effects of obesity in the workplace be fully understood, especially those effects linked to lost-time injuries. The aim of this paper was to evaluate predictors of workplace lost-time injuries and how they may be related to obesity or high body mass index by examining factors associated with lost-time injuries in the health care sector, a well-studied industry with the highest number of reported time loss injuries in Canada. A literature review focusing on lost-time injuries in Registered Nurses (RNs) was conducted using the keywords and terms: lost time injury, workers' compensation, occupational injury, workplace injury, injury, injuries, work, workplace, occupational, nurse, registered nurse, RN, health care, predictors, risk factors, risk, risks, cause, causes, obese, obesity, and body mass index. Data on predictors or factors associated with lost-time injuries in RNs were gathered and organized using Loisel's Work Disability Prevention Management Model and extrapolated upon using existing literature surrounding obesity in the Canadian workplace.
Transactions of the Korean Society of Automotive Engineers
/
v.9
no.6
/
pp.94-102
/
2001
The thermodynamic second law analysis, which means available energy or exergy analysis, for the indicated performance of Otto cycle engine has been carried out. Each operating process of the engine is simplified and modeled into the thermodynamic cycle. The calculation of the lost work and exergy through each process has been done with the thermodynamic relations and experimental data. The experimental data were measured from the test of single cylinder Otto cycle engine which operated at 2500 rpm, WOT(Wide Open Throttle) and MBT(Minimum advanced spark timing for Best Torque) condition with different fuels: gasoline, methanol and mixture of butane-methanol called M90. Experimental data such as cylinder pressure, air and fuel flow rate, exhaust gas temperature, inlet gas temperature and etc. were used for the analysis. The proposed model and procedure of the analysis are verified through the comparison of the work done in the study with experimental results. The calculated results show that the greatest lost work is generated during combustion process. And the lost work during expansion, exhaust, compression and induction process follows in order.
Journal of the Korean Society of Physical Medicine
/
v.12
no.2
/
pp.113-120
/
2017
PURPOSE: The purpose of this study was to investigate the effect of a physical therapy-based tailored exercise program on pain, accident incidence rates, the number of work days lost, and economical loss cost for workers in an automobile parts manufacturing company. METHODS: A total of 530 workers with musculoskeletal symptoms were given a physical therapy-based tailored exercise program twice a week, for one hour a day. This exercise program consisted of movement pattern correction, muscle stretching and strengthening, and postural correction exercises, according to principles of movement impairment syndromes and medical training therapy. From 2011 to 2016, the lost days of work, accident incidence rates, and loss cost were examined. The pain measured by VAS (visual analogue scale) and the number of workers participating in the exercise program from 2014 to 2016 were also measured. The single subjects A-B design was applied and analyzed. RESULTS: After applying the exercise program, pain decreased and the number of workers participating in the program increased. Accident incidence rates, number of work days lost, and economical loss cost decreased. There was a significant correlation between the number of workers who received exercise therapy by year and accident incidence rates, lost days of work, and economical loss cost (p<.05). CONCLUSION: It is necessary to expand the physical therapy-based tailored exercise program to prevent musculoskeletal disorders because it has a positive effect on both workers and employers.
This study compares and contrasts Freud's "work of mourning" which mostly appears in his memorable essay "Mourning and Melancholia" and Derrida's theory of mourning which appears in various works such as MEMOIRES for Paul de Man, The Work of Mourning, and others. Freud maintains that the mourner begins to sever emotional ties to the lost object through a labor of memory and eventually completes the work of mourning. It is a "testing of reality" that motivates the mourner to begin to relinquish emotional attachment to the lost object. Derrida, however, challenges Freudian work of mourning by saying that true mourning lies in "respecting the Otherness of the Other." Derrida suggests that Freud's "normal work of mourning" is "unjust betrayal" of the lost object because it "kills" and "devours" the other and thereby makes it part of the self. So he proposes that work of mourning has "to fail in order to succeed": "success fails" and "failure succeeds." There is an enormous, even epistemological, chasm between Freud who states that mourning, "however painful it may be, comes to a spontaneous end" and Derrida who states that "mourning is interminable. Inconsolable. Irreconcilable." and "I mourn Therefore I am." The former is the voice of "testing of reality" and common sense whereas the latter is that of utopian ethical vision. Yet neither seems to get the upper hand and they are kind of forced to maintain an ongoing dialogue with each other, for true mourning seems to lie somewhere in between.
This study analyzes the characteristics of occupational accidents of food delivery via motorcycle in terms of accident probability and work-days. Depending on their employment status, food-delivery workers were divided into "employed" workers (who work for restaurants) and "special-type" workers (who work for delivery platforms). Collected data include occupational accident-information during the last two years (1,468 cases for employed workers and 4,899 cases for special-type workers) and their risk information such as age, work experience, accident location, season of the accident, and weather conditions. The study finds that special-type workers had a significantly higher accident probability for the younger age group (80.8%), while employed workers had more accidents in both 20's or younger (34.9%) and 50's or older (25.4%). The number of work-days-lost was higher for special-type workers with less work experience, and it decreased with increasing work experience. Moreover, the chance for accidents was higher at night time (55%) than for day time (45%) for special-type workers as well as for employed workers. The number of work-days-lost was higher in foreign workers (180.79 days) than in Korean workers (121.44 days). Accident probability (30.7%) and work-days-lost (136.2 days) was higher in winter than in other seasons. In addition, accidents-per-day was higher on snowy days (12.7 cases per day) than rainy (8.1) and windy days (7.1). In addition, it was found that deadly accidents mainly caused injuries to face, head, and chest, while non-deadly accidents affected mainly the legs and feet. This study enables the development of better policies to prevent accidents of food delivery workers.
Journal of Korean Society of Occupational and Environmental Hygiene
/
v.28
no.4
/
pp.346-351
/
2018
Objective: This study aims to provide information needed to determine the wages paid for replacement labor for work lost following accidents in agricultural operations. Methods: Visits and interviews were conducted with 171 farmers who experienced a loss of at least one day of work due to an agricultural workplace accident. Results: It was found that only 35.1% of the study participants hired replacement labor, and more replacement labor was hired in greenhouse and fruit workplaces than in open field work. The mean number of days of hiring replacement labor was 14.6 days, and no significant differences were found between the national average wage and the surveyed value, while female workers were paid less than their male counterparts. Conclusions: The results from this study would be of help in determining a reasonable level of compensation for lost work.
van Thu, N.;Pearson, R.A.;Preston, T.R.;Fajersson, P.
Asian-Australasian Journal of Animal Sciences
/
v.9
no.4
/
pp.427-438
/
1996
The suitability of female cattle ($Brahman{\times}Holstein$) and buffaloes (Murrah / Jafarabadi) for work on a sugarcane crusher was tested. The animals were fed chopped sugarcane tops and elephant grass supplemented with rice bran and urea-molasses blocks. In experiment 1, six cattle and six buffaloes, (with three animals seven to eight months pregnant at the start of the experiment in each group), worked individually, alternate weeks for 90 minutes a day for 6 d/week. Within the 90 min, cattle did more work than buffaloes (p < 0.05), and non-pregnant animals did more than pregnant animals, but cattle crushed significantly (p < 0.05) more cane per day than buffaloes. During work animals lost weight, but gained the weight back during resting weeks, when fodder intakes were higher. There were no significant differences in live weight change and fodder intakes between pregnant and non-pregnant animals during the six weeks. In experiment 2, four pairs of lactating cows and buffaloes crushed sugarcane for 3 h/d, 6 d/week for three weeks. Work done was higher in cattle than buffaloes, but cane crushed was marginally lower. All animals lost weight during work, particularly in the first week, but gained weight during the week after work. Daily milk yield was lower during the working weeks ($-0.55{\pm}0.15kg$) than in the week before work. Butter fat yield showed no significant change. One buffalo showed ovarian activity and oestrus behaviour during the work. Two cows showed ovarian activity within one month after the work. It was concluded that pregnant and lactating cows and buffaloes can effectively operate a cane crusher, however a temporary reduction in milk yield can be expected in the working period, and ovarian activity may be suppressed.
The purpose of this study was to investigate the effects of a workplace-based work-conditioning program (WCP) on the management of work-related musculoskeletal disorders (WRMDs) in an automobile-parts manufacturing company. In total, 1,110 subjects with WRMDs participated in workplace-based WCP emphasizing function-centered management and ergonomics. We investigated the incidence of WRMDs variables (number of persons diagnosed with industrial accident-related WHMDs, number of cases of WRMD) and financial benefits (cost of workers' compensation insurance and lost work days related to WRMDs) per year before and after WCP. Additionally, we compared self-reported pain intensity and functional disability in subjects with musculoskeletal pain before and after the WCP. Pain intensity was measured using a visual analog scale (VAS), and functional disability was measured by the neck disability index (NDI) and the Oswestry disability Index (ODI). The number of person diagnosed with industrial accident-related WRMDs, the number of cases of WRMD, the cost of workers' compensation insurance and lost work days related to WRMDs per year decreased by 51%, 37%, 34%, and 47%, respectively, and VAS, NDI, and ODI scores decreased significantly after implementation of WCP (p<.05). Thus, the results of the present study suggest that function-centered, workplace-based WCP was effective in managing WRMDs at an automobile-parts manufacturing company.
KSII Transactions on Internet and Information Systems (TIIS)
/
v.7
no.12
/
pp.3118-3134
/
2013
This paper deliberates for a multimedia transmission scheme combining multiple description coding (MDC) and network coding (NC). Our goal is to take advantage from the property of MDC to provide quantized and compressed independent and identically distributed (iid) descriptions and also from the benefit of network coding, which uses network resources efficiently to recover lost data in the network. Recently, p-cycle NC has been introduced to recover and protect any lost or distorted descriptions at the receiver part exactly without need of retransmission. So far, MDC have not been explored using this type of NC. Compressed and coded descriptions are transmitted through the network where p-cycle NC is applied. P-cycle based algorithm is proposed for single and multiple descriptions lost. Results show that in the fixed bit rate, the PSNR (Peak Signal to Noise Ratio) of our reconstructed image and also subjective evaluation is improved significantly compared to previous work which is averaging method joint with MDC in order to conceal lost descriptions.
Journal of the Korea Institute of Building Construction
/
v.21
no.2
/
pp.165-174
/
2021
The construction industry causes the most accidents and fatalities among all industries. Although many efforts have been made to reduce safety accidents in construction, the study on the lost workdays that return to work place is insufficient. Therefore, this study proposes a model that classifies the lost workdays lost into moderate and severity, and derives the importance of variable and analyzes important factors through the trained random forest model. We analyze the learning process of the random forest which is a black box model, and extracted important variables that impact on the severity of the lost workdays through the extracted feature importance. The factors existing inside were analyzed through the extracted variables. The purpose of this study is to analyze the accident case data at the construction site through a random forest model and to review variables that have a high impact on the lost workdays. In the future, this sutdy can apply to improve construction safety management and reduce the accident of industrial accidents.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.