• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.709-713
• /
• 2010

The objective of this paper is to report how workers' actively participate in a participatory ergonomics (PE) program, and how this program resulted in improved working conditions and decreased occurrence of work-related musculoskeletal disorders (WMSDs). A major tire manufacturing company in Korea was studied. Most of the activities in the PE program were designed and actually practiced by the workers and their union. The results revealed some positive effects of applying a PE program to the employees. It was shown that incidence of the WMSDs as well as the lost work days and the economic cost incurred by the WMSDs decreased with the PE program.

• Archives of Pharmacal Research
• /
• v.15 no.1
• /
• pp.35-40
• /
• 1992

S. fradiae showed the highest acetanilide p-hydroxylation activity in the tested strains. And S. fradiae was well characterized genetically, especially with respect to tylosin production. Two mutants, which lost hydroxylation, were isolated in 140 regenerated colonies from protoplasts. In restriction enzyme digesion of total DNAs, isolation of giant linear plasmid DNA and determination of antibiotic resistances to chloramphenicol, tylosin, hygromycin B and mitomycin C, any differences among mutants and a wild type strain were not detected. These facts suggest that lesion on 6, 000 Kb chromosomal DNA was responsible for the lack of p-hydroxylation activity induced by protoplast formation and regeneration.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1760-1769
• /
• 2007

The cut slope sliding which has been frequently encountered in Pohang area has been reported due to the rapid reduction of shear strength in mudstone after being exposed to the air. Mudstone has characteristics that it has high enough strength and stiffness in a dry condition, but the strength and stiffness decrease in a wet condition with groundwater infiltration. The case study in this paper shows that mudstone which had enough strength in a boring stage has lost the strength after installing PRD steel pipe pile inducing an insufficient bearing capacity, which has been ascertained by the static load test. Test construction has been performed to investigate the most favorable method for increasing a pile bearing capacity in mudstone with various methods such as MSG (Micro Silica Grouting) around the tip and side of a pile, the perimeter grouting combined with Micro pile reinforcement, and concrete filling after tip reinforcing grouting. From the test construction, MSG has been turned out to be the most favorable method for increasing a pile bearing capacity in mudstone, which has been confirmed by the static load test.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.1
• /
• pp.54-61
• /
• 2004

The purpose of this study is to improve of energy performance in school buildings. Many building renovations have mainly focused on commercial buildings and houses, but school buildings have no attention in this field although there are many buildings that show degraded energy performance and there are many old fashioned buildings which need renovation. This study was carried out through the survey, field study, energy simulation and life cycle cost analysis. The results of this study can be summarized as follows: In model building, large amount of heat were lost at the building envelope, such as non-insulated skins, window-sills and window-frame joints. According to the simulation result, about 15％ of heating energy is saved by the insulating works compared to pre-renovation condition. Also, LCC analysis revealed to be more effective to select a exteria wall insulation such as a dryvit system.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.827-832
• /
• 2009

Exergy is the amount of reversible work obtainable when some matter is brought to a state of thermodynamic equilibrium with ambient. This exergy is availability or useful work induced from carnot cycle, and this can calculate the irreversible loss work which occurs within any thermal or power cycle. The exergy ratio is the value of exergy divided by enthalpy of ambient reference, where the quality of energy or enthalpy in substances is evaluated by exergy ratio. Exergy is very important in optimal design method of thermal system or each component, and the value of exergy at given state is calculated by equation. Here, designer can easily understand and find the value of enthalpy because enthalpy is graphically drawn in chart, however exergy did not. In this paper, exergy and exergy ratio of air were drawn on temperature-entropy chart, and we wish to this chart is a help to design, analysis and education.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.08a
• /
• pp.8-21
• /
• 2004

Examples of GPR survey results at a variety of archaeological sites are presented. Several new analyses which include static corrections for the tilt of the GPR antenna are shown for imaging of burial mounds with significant topography. Example archaeological site plans developed from GPR remote sensing of Roman and Japanese sites are given. The first completely automated GPR survey, using only Global Positioning Satellite navigation to create 3D data volumes, is employed for a site in Louisiana to detect lost graves of the Choctaw Indian Tribe.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.29
• /
• pp.47-61
• /
• 1994

Today, we can see the more serious industrial accidents than in the past according to the high growth rate of industrial society. Therefore, from the corporate as well as the human viewpoint it pays to have workers adequately trained and safety - oriented. The cost of accidents is high in terms of medical insurance costs lost time on the job, legal fees for court cases, workers' compensation, disability insurance, and unemployment compensation. The cost of preventing occupational accidents or illnesses is much less then the cost of treatment or workers' compensation. In this study, we investigate the situations of industrial accidents and safety control of 277 coporates in Busan, analyze the causes of accidents and propose the countermeasures to each of causes.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.37
• /
• pp.31-40
• /
• 1996

The amount of safety stock is decided from various information such as the forecasted demand, the lead time, the size of the order quantity and the desired service level. There are two cases to consider the problem of setting safety stock when both the demand in a period and the lead time are characterized as random variables: the first case is the parameters of the demand and lead time distributions are known, the second case is they are unknown and must be estimated. The objective of this study is to present the procedure for setting safety stocks in the case the parameters of the demand and lead time distributions are unknown and must be estimated. In this study, a simple exponential smoothing model is used. to generate the estimates of demand in each period and a discrete distribution of the lead time is developed from historical data, and the optimal service level is used which determined to consider both of a backorder and lost sale.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.4 no.1
• /
• pp.55-57
• /
• 2006

Cyanides and Hydrogen cyanide are used in production of chemicals, electroplating, photographic development, making plastics, fumigating ships, and some mining processes. We experienced of Hydrogen cyanide inhalation injury. A 45-year-old man worked at electroplating. As soon as he mixed sodium cyanide with acid, cyanide produced hydrogen cyanide, occasionally he inhaled Hydrogen cyanide and he lost his consciousness. He was moved to near hospital and took emergency treatment and then was transferred to our hospital. On arrival he had severe dyspnea, metabolic acidosis, and tachycardia. After he was treated with supportive method he recovered his consciousness in 20 hours at emergency room.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.48-53
• /
• 1993

At present, the manufacturing industry is in a process of a great change. There is a demand for a variety of types and shorter product life. The change increases the number of different tools and frequencies of tool changes. For the most part, the tools are presetted and offset values are entered manually or via punched tapes to NC machines. Thus a large amount of capital is tied up in the tool area and considerable productive time is lost. Consequently, there is a need for improvement in tool management. This paper describes a computer controlled tool data management system which include: 1) tool identification with bar code. 2) computer aided management and updating of tool data. 3) tool data communication with tool presetter, CNC, etc.