• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2396-2406
• /
• 2021

The Pacific Earthquake Engineering Research (PEER) Center has been developing a performance-based earthquake engineering (PBEE) methodology, which is based on explicit determination of performance, e.g., monetary losses, in a probabilistic manner where uncertainties in earthquake ground motion, structural response, damage estimation, and losses are explicitly considered. To carry out the PEER PBEE procedure for a component of the nuclear power plant (NPP) such as the cable tray system, hazard curve and spectra were defined for two hazard levels of the ground motions, namely, operation basis earthquake, and safe shutdown earthquake. Accordingly, two sets of spectral compatible ground motions were selected for dynamic analysis of the cable tray system. In general, the PBEE analysis of the cable tray in NPP was introduced where the resulting floor motions from the time history analysis (THA) of the NPP structure should be used as the input motion to the cable tray. However, for simplicity, a finite element model of the cable tray was developed for THA under the effect of the selected ground motions. Based on the structural analysis results, fragility curves were generated in terms of specific engineering demand parameters. Loss analysis was performed considering monetary losses corresponding to the predefined damage states. Then, overall losses were evaluated for different damage groups using the PEER PBEE methodology.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.50-54
• /
• 2018

We analyzed the temperature dependency of the AC losses in high temperature superconducting (HTS) coils. In the case of a short sample of an HTS tape, the magnetization loss at 4.2 K could be higher than the one at 77 K for a same transport current. It happens when the perpendicular magnetic field is above a certain magnitude. The AC loss characteristics of solenoidal coils have been analyzed at the temperatures of 65 K and 77 K. They were categorized by the aspect ratios. The operating current of a solenoid was normally set about 70 % of the critical current. An HTS solenoid with the same operating current of 77 K causes larger AC losses at 65 K in the most cases of the HTS solenoids. We also analyzed the AC loss characteristics due to the temperature variations for three types of superconducting magnetic energy storages. Two of them were solenoidal types and the other was toroidal type. The results showed the tendency for the coils to have higher AC losses at lower temperature with the same operating currents and scenarios.

• 전력전자학회논문지
• /
• 제27권1호
• /
• pp.56-62
• /
• 2022

In this paper, the effect of pulse width modulation methods on thermal loadings and power losses of single-phase five-level NPC inverters for photovoltaic systems are analyzed. The pulse width modulation methods affect the power losses of the NPC inverters and thus lead to different thermal loadings of NPC inverters. To identify the reliability-critical power device with respect to thermal stress, the thermal loadings of I- and T-type NPC inverters are analyzed by applying the unipolar pulse modulation method. Then, the effect of the discontinuous pulse width modulation method on power losses and thermal loadings of power devices of I- and T-type NPC inverters are analyzed. Finally, the operation of NPC inverters applying the discontinuous pulse modulation method is confirmed by experiments. The results show that the discontinuous pulse modulation method is able to improve the reliability of NPC inverters by reducing thermal loadings of reliability-critical power devices and it is more effective for T-type NPC inverters than I-type NPC inverters.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.192-194
• /
• 2015

The growing size and complex process in construction project recently leads to increase risk and the losses as well. Even though researchers have identified the major risk indicators, there is lack of comprehensive and quantitative research for identifying the relationship between the risk indicators and economic losses associated with construction projects. To address this shortage of research, this study defines risk indicators and create a framework to assess the influence of economic losses from the indicators. An insurance company's claim payout record was accepted as the dependent variable to reflect the real economic losses. Based on the claims, we categorized the causes and results of accidents. To establish framework, built environment vulnerability indicators and geographical vulnerability indicators were employed as the risk indicators. A Pearson correlation analysis was adopted to validate the relationship with loss ratio and risk indicators. Consequently, this framework and its results may offer significant references for under writers of insurance companies and loss prevention activities.

• 한국콘텐츠학회논문지
• /
• 제17권4호
• /
• pp.95-107
• /
• 2017

최근 기후변화의 영향에 의해 재난의 규모가 점차 대형화 되어감에 따라 사회 및 국민경제에 미치는 영향이 증대되고 있다. 그러나 기존의 재해손실 통계는 직접적인 인명피해를 제외하면 물리적인 피해에만 국한되어 있어 피해규모가 과소 집계되는 문제가 있다. 이로 인해 피해자의 보상 및 정부 지자체의 재난정책 수립에도 장애요소로 작용되고 있다. 따라서 본 연구는 그동안 간과되어 온 사회경제적 직 간접 손실의 피해항목을 조사 분석하여 국내의 실정에 맞는 기본통계 항목을 도출하는 데 그 목적이 있다. 이를 위해 국내외의 재해피해 통계 현황과 선행연구 등을 검토하여 사회경제적 직 간접 손실에 대한 개념 및 프레임워크를 설정하고, 예비 통계항목을 도출하였다. 이후, 통계항목의 선별기준을 정립하여 최종 통계항목을 선정하였다. 본 연구의 결과는 풍수해의 사회경제적인 영향과 피해규모를 산정하고 예측하는 기술개발 연구에 기초자료로 활용될 수 있다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.297-305
• /
• 2006

본 논문에서는 터빈의 형상 변수에 따른 부분흡입형 초음속 터빈 손실 특성을 분석하기 위하여 초음속 노즐 형상, 축방향 간극 길이, 로터 앞전의 모서리각에 따른 초음속 터빈내 유동 해석을 실시하였다. 먼저 축방향 간극을 진행하면서 발생하는 유동의 익렬 팁방향의 휘어짐은 초음속 노즐 형상에 크게 영향을 받는다. 다음으로 모서리각은 익렬 앞전에서 발생하는 충격파등의 강도를 결정한다. 마지막으로 축방향 간극에서 발생하는 유동의 확산 및 혼합은 축방향 간극 길이에 크게 영향을 받았다. 따라서 터빈내에서 발생하는 손실 중 유체역학적 손실은 노즐 형상과 로터 앞전의 모서리각에 의해 결정되었으며, 부분 흡입 손실은 노즐 형상 및 축방향 간극 길이에 영향을 받았다.

• 한국토양비료학회지
• /
• 제42권Spc호
• /
• pp.47-50
• /
• 2009

본 연구는 경사지 밭 토양에서의 양분유실로 인한 지표수와 지하수 오염의 주요 요인인 인산과 질소에 대하여 평가하였다. 유실된 토양 중에서 흡착된 인산은 용해되어 천천히 조류들의 영양원으로 이용되고, 물에 용해된 질소와 인산은 부영양화의 주요 요인으로 조류들에 의하여 즉시 영양원으로 이용된다. 질소의 유실은 유실된 총량의 약 90%가 유출수와 침투수에 의하여 유실되고, 인산의 유실은 유실된 총량의 약 60% - 67%가 유실된 토양 입자에 흡착되어 유실되었다. 대체적으로 환경적으로 합리적인 토양 및 물 관리에 의한 적절한 토지이용, 시비관리 및 토양 보전농법은 토양 및 양분유실을 감소시킬 수 있고, 지표수와 지하수의 수질을 개선할 수 있다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.303-307
• /
• 2009

터빈 익렬 내의 2차유동손실은 터빈 익렬에서 발생하는 전체 공기역학적 손실의 $30{\sim}50%$ 차지한다. 따라서 터빈 효율 향상에 있어 개선해야 될 중요한 부분으로 인식되고 있다. 또한, 과거부터 2차유동에 의한 손실을 줄이기 위한 많은 연구들이 수행되어졌다. 본 논문에서는 2차유동손실을 일으키는 요인 중의 하나인 말굽와류의 강도를 감쇄시키기 위해 일반적인 날개 앞전에 설치한 판에 대해, 판의 설치 높이, 길이, 폭 및 두께 등의 형상변수를 설계변수로 정하여 이를 최적화 하였다. 연구를 위해 $FLUENT^{TM}$와 $iSIGHT^{TM}$를 이용하였다. 그리고 기준 모델의 경우보다 전압력 손실 계수가 약 7.5% 향상 되었다.

• International Journal of Automotive Technology
• /
• 제4권2호
• /
• pp.87-94
• /
• 2003

Recent advancements of permanent magnet (PM) materials and solid-state devices have contributed to a substantial performance improvement of permanent magnet machines. Owing to the rare-earth PMs, these motors have higher efficiency, power factor, output power per mass and volume, and better dynamic performance than induction motors without sacrificing reliability. Not surprisingly, they are continuously receiving serious considerations for a variety of automotive and propulsion applications. An electric vehicle (EV) requires a high-effficient propulsion system having a wide operating range and a capability of generating a high peak torque for short durations. The improvement of torque-speed performance for these systems is consequently very important, and researches in various aspects are therefore being actively pursued. A great emphasis has been placed on the efficiency and optimal utilization of PM machines. This requires attention to many aspects related to the machine design and overall performance. In this respect, the prediction of iron losses is particularly indispensable and challenging, especially for drives with a deep field-weakening range. The objective of this paper is to present iron loss estimations of a PM motor over a wide speed range. As aforementioned, in EV applications core losses can be significant during high-speed operation and it is imperative to evaluate these losses accurately and take them into consideration during the motor design stage. In this investigation, the losses are predicted by using an analytical model and a 2D time-stepped finite element method (FEM). The results from different analytical approaches are compared with the FEM computations. The validity of each model is then evaluated by these comparisons.

• 보건행정학회지
• /
• 제10권3호
• /
• pp.169-187
• /
• 2000

Cigarette smoking has been identified as the most important source of preventable morbidity and premature mortality (WHO, 1995), The prevalence of smoking among men is very high in Korea. This study estimated productivity losses due to smoking in Korea, 1997. The derivation of cost estimates for mortality, disability, hospitalization and use of physician services related to cigarette smoking is bas 어 on the calculation of attributable fractions suggested by MacMahon and Cole and Smoking-Attributable Mortality, Morbidity, and Economic Cost(SAMMEC) software. To estimate the number of deaths from neoplastic, cardiovascular, respiratory diseases associated with cigarette smoking, estimates for adults(aged 20 years and over) were based on 1997 mortality data, 1995 data on smoking prevalence from Korea Institute for Health and Social Affairs. Smoking-attributable indirect morbidity cost data were obtained from the National Federation of Medical Insurance. As the result of cost estimation, these productivity losses were 336-430 billion won. During 1997, 8,620-10,804 deaths were attributed to smoking. Cigarette smoking resulted in 133,991-169,422 Years of Potential Life Lost (YPLL) to life expectancy. For smoking -attributable indirect mortality costs, the present value of future earnings(PVFE) for the age at death are 299-384 billion won. Smoking-attributable indirect morbidity costs, the costs of lost productivity for persons who are disabled by smoking-related chronic diseases are 37-46 billion won. In this study the productivity losses due to smoking were restricted to the health effects of smoking. It is possible that these costs were underestimated with the limitation of the data. Smoking is the leading preventable cause of illness and death. The results of this study can be used as elementary data for antismoking policy.