• Title/Summary/Keyword: Loss of Self-control

Search Result 159, Processing Time 0.029 seconds

Effects of a Memory Training Program Using Efficacy Sources on Memory Improvement in Elderly People. (노인의 효능자원을 이용한 기억훈련프로그램의 효과)

  • Kim, Jeong-Hwa
    • Journal of Korean Academy of Nursing
    • /
    • v.30 no.5
    • /
    • pp.1170-1180
    • /
    • 2000
  • This study was a quasi-experimental study to confirm the effects of a memory training program using efficacy sources. The purpose was to develop an effective memory training program for elderly people and to identify the effects of the memory training program. This study was carried out between February 24 and July 18, 1999 and the subjects of the study were 102 elderly people who were participants at a welfare institute in Seoul. The experimental group (51) and the control group (51) were assigned by means of participation order. The control group was matched to the experimental group and was selected considering age, sex, and religion. The experimental group participated in the memory training program. The memory training program was based on the literature of Fogler & Stern (1994), Wang & Lee (1990), Lee (1991) and Lee (1993). The memory training program was given twice a week for two weeks with each program lasting two hours. Task centered memory self-efficacy was measured using the Memory Self-Efficacy Scale developed by Berry & Dennehey (1989) and Meta Memory was measured by the MIA developed by Dixon et al. (1988) Memory performance was measured by the word list developed by Cho Sung Won (1995) and the face recognition task (Face Recognition Task developed for this study). Data were analyzed by SPSS PC and the results are described below. 1. The experimental group which participated in the Memory Training Program showed higher task centered memory self-efficacy scores as compared to the control group (t=4.354, P=.0001). 2. The experimental group which participated in the Memory Training Program showed higher metamemory scores as compared to the control group (t=4.733, P=.0001). 3. The experimental group which participated in the Memory Training Program showed higher memory performance scores as compared to the control group (t=7.500, P=.0001). The memory performance involved an immediate word recall task, a delayed word recall task, a word recognition task, and the face recognition task. 4. In the experimental group, there was significant correlation between the task centered memory self-efficacy scores and the metamemory scores (r=.382, P=.006), but the correlation between the task centered memory self-efficacy scores and the memory performance scores and between the metamemory scores and the memory performance scores were not significant. The results showed that task centered memory self-efficacy, meta memory and memory performance improved following the Memory Training Program including the memory process, changes in memory with aging, and appropriate use of memory strategies. Memory Training Program is an effective nursing intervention for improving memory in elderly people and, also, in people with complaints of memory loss.

  • PDF

Transformer-Reuse Reconfigurable Synchronous Boost Converter with 20 mV MPPT-Input, 88% Efficiency, and 37 mW Maximum Output Power

  • Im, Jong-Pil;Moon, Seung-Eon;Lyuh, Chun-Gi
    • ETRI Journal
    • /
    • v.38 no.4
    • /
    • pp.654-664
    • /
    • 2016
  • This paper presents a transformer-based reconfigurable synchronous boost converter. The lowest maximum power point tracking (MPPT)-input voltage and peak efficiency of the proposed boost converter, 20 mV and 88%, respectively, were achieved using a reconfigurable synchronous structure, static power loss minimization design, and efficiency boost mode change (EBMC) method. The proposed reconfigurable synchronous structure for high efficiency enables both a transformer-based self-startup mode (TSM) and an inductor-based MPPT mode (IMM) with a power PMOS switch instead of a diode. In addition, a static power loss minimization design, which was developed to reduce the leakage current of the native switch and quiescent current of the control blocks, enables a low input operation voltage. Furthermore, the proposed EBMC method is able to change the TSM into IMM with no additional time or energy loss. A prototype chip was implemented using a $0.18-{\mu}m$ CMOS process, and operates within an input voltage range of 9 mV to 1 V, and an output voltage range of 1 V to 3.3 V, and provides a maximum output power of 37 mW.

Finite Element Analysis for Hysteresis Motors (히스테리시스 전동기의 유한요소해석)

  • Hong, Sun-Ki;Won, Jong-Soo
    • Proceedings of the KIEE Conference
    • /
    • 1995.11a
    • /
    • pp.15-17
    • /
    • 1995
  • Hysteresis motor is a synchronous machine which has simple structure and self-start characteristic but also has serious difficulties in numerical analysis. In this study, a finite element analysis for hysteresis motor considering the hysteresis characteristics is presented. The hysteresis model is the magnetization-dependent Preisach model which explains hysteresis phenomena very well. From this, we estimate the instantaneous torque, average torque and hysteresis loss of the rotor, considering slot and winding distribution.

  • PDF

Test Point Insertion with Control Point by Greater Use of Existing Functional Flip-Flops

  • Yang, Joon-Sung;Touba, Nur A.
    • ETRI Journal
    • /
    • v.36 no.6
    • /
    • pp.942-952
    • /
    • 2014
  • This paper presents a novel test point insertion (TPI) method for a pseudo-random built-in self-test (BIST) to reduce the area overhead. Recently, a new TPI method for BISTs was proposed that tries to use functional flip-flops to drive control test points instead of adding extra dedicated flip-flops for driving control points. The replacement rule used in a previous work has limitations preventing some dedicated flip-flops from being replaced by functional flip-flops. This paper proposes a logic cone analysis-based TPI approach to overcome the limitations. Logic cone analysis is performed to find candidate functional flop-flops for replacing dedicated flip-flops. Experimental results indicate that the proposed method reduces the test point area overhead significantly with minimal loss of testability by replacing the dedicated flip-flops.

How Does Body-Shape Perception Affect the Weight Control Practices?: 2012 Korea National Health and Nutrition Examination Survey (주관적 체형인식이 체중조절방법 선택에 미치는 영향: 2012년 국민건강영양조사 자료를 이용하여)

  • Yoo, Jeong-Eun;Oh, Dal-Seok;Kim, Nam-Kwen
    • Journal of Korean Medicine for Obesity Research
    • /
    • v.14 no.1
    • /
    • pp.29-35
    • /
    • 2014
  • Objectives: This study was to investigate how body-shape perception could influence to weight control practice both in normal and obese group. Methods: We used 2012 Korea National Health and Nutrition Examination Survey to analysis 1) weight control practices of population; 2) consistency between body-shape perception and body mass index; 3) comparison weight control practices between normal group and body mass index (BMI) obese group in perceptional obese group; 4) odds ratio of BMI obese group using herbal drugs for weight control practice in perceptional obese group. Results: We found that study population tends to choose exercise, dietary restriction, meal skip, health functional food, one-food, drug, herbal drug, fasting and self-medication in order of frequency to control weight. The agreement between body-shape perception and BMI within obese group was approximately 64% with 0.40 of Cohen's Kappa coefficient, ranging from 0.384 to 0.423. Within perceptional obese group, choosing each weight control practice methods ratios between normal BMI group and obese BMI group were not significantly different. Within perceptional obese group, obese BMI group showed significant odds ratio (2.58, 95% confidence intervals, 1.38~4.85) than normal BMI group in choosing herbal medication for weight loss when adjusting other variables. Conclusions: We concluded that body-shape perception might be an important factor for choosing weight control program, and roles of Korean medical doctors thought to be enhanced for using herbal medication for weight loss.

A Magnetic Energy Recovery Switch Based Terminal Voltage Regulator for the Three-Phase Self-Excited Induction Generators in Renewable Energy Systems

  • Wei, Yewen;Kang, Longyun;Huang, Zhizhen;Li, Zhen;Cheng, Miao miao
    • Journal of Power Electronics
    • /
    • v.15 no.5
    • /
    • pp.1305-1317
    • /
    • 2015
  • Distributed generation systems (DGSs) have been getting more and more attention in terms of renewable energy use and new generation technologies in the past decades. The self-excited induction generator (SEIG) occupies an important role in the area of energy conversion due to its low cost, robustness and simple control. Unlike synchronous generators, the SEIG has to absorb capacitive reactive power from the outer device aiming to stabilize the terminal voltage at load changes. This paper presents a novel static VAR compensator (SVC) called a magnetic energy recovery switch (MERS) to serve as a voltage controller in SEIG powered DGSs. In addition, many small scale SEIGs, instead of a single large one, are applied and devoted to promote the generation efficiency. To begin with, an expandable mathematic model based on a d-q equivalent circuit is created for parallel SEIGs. The control method of the MERS is further improved with the objective of broadening its operating range and restraining current harmonics by parameter optimization. A hybrid control strategy is developed by taking both of the stand-alone and grid-connected modes into consideration. Then simulation and experiments are carried out in the case of single and double SEIG(s) generation. Finally, the measurement results verify that the proposed DGS with SVC-MERS achieves a better stability and higher feasibility. The major advantages of the mentioned variable reactive power supplier, when compared to the STATCOM, include the adoption of a small DC capacitor, line frequency switching, simple control and less loss.

A Study of Weight Control Attempt, Psychosocial Status, Nutrition Behavior and Related Factors among Female University Students

  • Kim, Kyung-A;Kang, Hyun-Joo;Kim, Kyungwon
    • Journal of Community Nutrition
    • /
    • v.1 no.2
    • /
    • pp.108-118
    • /
    • 1999
  • This study was designed to examined psychosocial status and nutritional factors(nutrition knowledge, dietary attitudes, eating behavior, dietary intakes) among female university students and to investigate if there were differences in these variables by weight loss attempt. A cross-sectional survey was conducted to 225 female university students in Seoul. Survey instrument was adapted or modified based on literature review, and dietary intakes were assessed using 24-hour recall and CAN-pro. Descriptive statistics, t-test x$^2$-test were used in data analysis. Mean height, weight of subjects were 162.7cm, 51.3kg, and mean BMI was 19.4. One hundred-nine students(48.4%) were grouped into weight loss attempt roup and 116 students were grouped int non-attempt group. According to BMI, 58.7% of weight loss attempt group were underweight, suggesting that unnecessary weight control is common in college women. With respect to psychosocial status, subjects received moderate degree of stress and were slightly satisfied with life. There was no significant difference in stress, social support or self-esteem between the two groups, however, students in non-attempt group were more satisfied with their life(p<0.01) and adapted better in school that students in weight loss attempt group. Subjects scored 14.9${\pm}$2.1 (highest score : 20) on nutritional knowledge, and showed favorable dietary attitudes. Overall, nutritional knowledge and dietary attitudes were not significantly different between the two groups. Common eating problems were irregular meals(71.6%), followed by unbalanced meals and eating-out. Subjects in weight loss attempt group were more likely to change eating habit after entering the university and showed more undesirable eating habit. Dietary intake data indicated hat the energy derived from fat was slightly higher than the recommended level. Most of the nutrient intake was lower than the RDA, particularly, iron and calcium intake was below the 50% of the RDA. Although this study did not reveal significant difference in nutritional knowledge or dietary intake by weight loss attempt, this study showed status of weight control, eating habit and dietary intake in female university students, and provide some information for nutrition education of college women.

  • PDF

QoS Based Enhanced Collaboration System Using JMF in MDO

  • Kim Jong-Sung
    • Proceedings of the IEEK Conference
    • /
    • 2004.06a
    • /
    • pp.281-284
    • /
    • 2004
  • This paper presents the design and implementation of a QoS based enhanced collaboration system in MDO. This is an efficient distributed communication tool between designers. It supports text communication, audio/video communication, file transfer and XML data sending/receiving. Specially, this system supports a dynamic QoS self-adaptation by using the improved direct adjustment algorithm (DAA+). The original direct adjustment algorithm adjusts the transmission rate according to the congestion level of the network, based on the end to end real time transport protocol (RTP), and controls the transmission rate by using the information of loss ratio in real time transport control protocol (RTCP). But the direct adjustment algorithm does not consider when the RTCP packets are lost. We suggest an improved direct adjustment algorithm to solve this problem. We apply our improved direct adjustment algorithm to our of QoS (Quality of Service) [1] based collaboration system and show the improved performance of transmission rate and loss ratio.

  • PDF

The Framework Development of Cloud Computing-based Integrated EHS Management System for Small and Medium Construction Companies (중소건설사를 위한 클라우드 컴퓨팅 기반 EHS 통합관리시스템 프레임워크 개발)

  • Seo, Kwang-Kyu
    • Journal of the Korea Safety Management & Science
    • /
    • v.12 no.4
    • /
    • pp.139-143
    • /
    • 2010
  • The small and medium construction companies are facing potential EHS(Environment, Health & Safety) of major accidents to cause casualties or a financial loss and increasing social responsibility. So, they have to voluntarily accomplish the EHS management system rather than passively with regard to EHS regulation. In this study, the framework of integrated EHS management system is developed based on cloud computing, and construction companies are to materialize self-regulation EHS process of construction workplace and to standardize the total EHS business process using the developed system. The proposed system also provides risk analysis, education/control and continuous improvement for EHS tasks and users can easily access the system on the web at a low price through cloud computing service. Eventually, the integrated system contributes to the managerial improvement by minimizing economic and physical loss caused by construction accidents.

The Development of Cloud Computing-Based Integrated EHS Management System for the Construction Companies (클라우드 컴퓨팅 기반 건설사용 EHS 통합관리시스템 개발)

  • Seo, Kwang-Kyu
    • Proceedings of the KAIS Fall Conference
    • /
    • 2010.11b
    • /
    • pp.859-861
    • /
    • 2010
  • The construction companies are facing potential EHS(Environment, Health & Safety) of major accidents to cause casualties or a financial loss and increasing social responsibility. So, they have to voluntarily accomplish the EHS management system rather than passively with regard to EHS regulation. In this study, the integrated EHS management system is developed based on cloud computing, and construction companies are to materialize self-regulation EHS process of construction workplace and to standardize the total EHS business process using the developed system. The proposed system also provides risk analysis, education/control and continuous improvement for EHS tasks and users can easily access the system on the web at a low price through cloud computing service. Eventually, the integrated system contributes to the managerial improvement by minimizing economic and physical loss caused by construction accidents.

  • PDF