• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.209-220
• /
• 2023

Recently, defects that occurred during the construction of apartment houses have become a social issue. Defects in apartment houses lead to waste of resources and economic loss, causing psychological and physical damage to customers, and a decrease in reliability and financial loss to construction companies. The purpose of this study was to analyze the impact of defect occurrence according to the difference in project management level in the apartment housing construction stage, and to investigate the extent to which the project manager's experience affects the defect occurrence rate. For the empirical analysis of the study, statistical analysis was conducted using data collected from 130 actual projects. The results of the analysis showed that schedule management, cost management, and quality management had a positive effect on reducing the defect occurrence rate in the execution stage of apartment housing construction, while human resource management productivity had a negative effect. This study theoretically demonstrated the importance of project management, and in practice, showed that schedule management, cost management, and quality management should be faithfully performed in the execution stage to reduce the rate of defects after project completion. It was also suggested that hiring an experienced project manager would help reduce project defects.

• The Plant Pathology Journal
• /
• v.15 no.4
• /
• pp.210-216
• /
• 1999

TREGRO, a computer simulation model of individual tree growth, was applied to estimate ozone ($\textrm{O}_3$) effects on aspen(Populus tremuloides) growth under ambient and 1.7 times ambient $\textrm{O}_3$ of Seoul in 1996. The three highest $\textrm{O}_3$ (Kuui-dong, Ssangmun-dong, Sungsoo-dong) and the two lowest $\textrm{O}_3$ sites (Mapo-dong, Namgajwa-dong) were evaluated. The current ambient $\textrm{O}_3$ did not affect aspen growth compared to simulation without $\textrm{O}_3$. The only effect was 6.6 percent of total assimilated carbonloss at Ssangmun-dong where the level of $\textrm{O}_3$ was greatest among the 21 sites examined. Decrease as much as 50 percent of total carbon gain was calculated at 1.7 times ambient $\textrm{O}_3$ of the three highest sites. The carbon loss by $\textrm{O}_3$ came from biomass of tissues and total nonstructural cabron (TNC) such as starch and sugar. The most sensitive fraction was TNC and the next was root biomass. Foliage mass was not affected by $\textrm{O}_3$. Structural biomass loss was at best 1 to 3 percent at 1.7 times ambient $\textrm{O}_3$ at the two lowest sites. The daily carbon simulation was affected by $\textrm{O}_3$ mainly during Growth Period 4 (Jul. 21-Oct. 26). Correlations between site, dose, and the simulated responses of aspen (tissue biomass, TNC, respiration, and senescence) ranged from -0.703 to -0.973 depending on the plant responses. The ozone effects on poplar in Seoul are not severe currently, but are probably measurable at Ssangmun-dong. However, severe $\textrm{O}_3$ effects on biomass would occur if $\textrm{O}_3$ levels increase to 1.7 times ambient $\textrm{O}_3$ in Seoul. In addition, v could weaken the trees thus increasing susceptibility to pathogens or insects.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.175-183
• /
• 2014

This study investigates the response of structures to tunnelling-induced ground movements in clay ground, varying tunnel excavation condition (tunnel depth and diameter), tunnel construction condition (ground loss), and tunnel ground condition (soft clay and stiff clay). Four-story block-bearing structures have been used because the structures can easily be characterized of the extent of damages with crack size and distribution. Numerical parametric studies have been used to investigate of the response of structures to varying tunnelling conditions. Numerical analysis has been conducted using Discrete Element Method (DEM) to have real cracks when the shear and tensile stress exceed the maximum shear and tensile strength. The results of structure responses from various parametric studies have been integrated to consider tunnel excavation condition, tunnel construction condition, and tunnel ground condition and provide a relationship chart among them. Using the chart, the response of structures to tunnelling can easily be evaluated in practice in clay ground.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.4 no.2
• /
• pp.13-19
• /
• 2008

In order to predict a remaining life of a plant, it is necessary to select the components that are critical to the plant life. The remaining life of those components shall be evaluated by considering the aging effect of materials used as well as numerous factors. However, when evaluating reliability of nuclear structural components, some problems are quite formidable because of lack of information such as operating history, material property change and uncertainty in damage models. Accordingly, if structural integrity and safety are evaluated by the deterministic fracture mechanics approach, it is expected that the results obtained are too conservative to perform a rational evaluation of plant life. The probabilistic fracture mechanics approaches are regarded as appropriate methods to rationally evaluate the plant life since they can consider various uncertainties such as sizes and shapes of cracks and degradation of material strength due to the aging effects. The objective of this study is to evaluate the structural integrity for a reactor pressure vessel under the small break loss of coolant accident by applying the deterministic and probabilistic fracture mechanics. The deterministic fracture mechanics analysis was performed using the three dimensional finite element model. The probabilistic integrity analysis was based on the Monte Carlo simulation. The selected random variables are the neutron fluence on the vessel inside surface, the content of copper, nickel, and phosphorus in the reactor pressure vessel material, and initial RTNDT.

• Computers and Concrete
• /
• v.22 no.2
• /
• pp.167-182
• /
• 2018

The modeling of loss of bond between reinforcing bars (rebars) and concrete due to corrosion is useful in studying the behavior and prediction of residual load bearing capacity of corroded reinforced concrete (RC) members. In the present work, first the possibility of using different methods to simulate the rebars-concrete bonding, which is used in three-dimensional (3D) finite element (FE) modeling of corroded RC beams, was explored. The cohesive surface interaction method was found to be most suitable for simulating the bond between rebars and concrete. Secondly, using the cohesive surface interaction approach, the 3D FE modeling of the behavior of non-corroded and corroded RC beams was carried out in an ABAQUS environment. Experimental data, reported in literature, were used to validate the models. Then using the developed models, a parametric study was conducted to examine the effects of some parameters, such as degree and location of the corrosion, on the behavior and residual capacity of the corroded beams. The results obtained from the parametric analysis using the developed model showed that corrosion in top compression rebars has very small effect on the flexural behaviors of beams with small flexural reinforcement ratio that is less than the maximum ratio specified in ACI-318-14 (singly RC beam). In addition, the reduction of steel yield strength in tension reinforcement due to corrosion is the main source of reducing the load bearing capacity of corroded RC beams. The most critical corrosion-induced damage is the complete loss of bond between rebars and the concrete as it causes sudden failure and the beam acts as un-reinforced beam.

• The Journal of Internal Korean Medicine
• /
• v.44 no.6
• /
• pp.1139-1149
• /
• 2023

Objectives: This study is designed to verify the effects of Mannyeon-hwan (MNH) on acetic acid-induced colitis in rats. Methods: Colitis was induced in male Sprague-Dawley rats weighing approximately 250 g by injecting acetic acid through the anus. The rats were classified into four groups: normal group, acetic acid (AA) group, AA+MNH (L) (low concentration) group, and AA+MNH (H) (high concentration) group. The body weight, visual evaluation of the colonic mucosa, anatomical histological changes, and changes in the expression of cytokines in the colon tissue were compared and analyzed. Results: Compared with the normal group, weight loss was observed in mice induced with colitis. Compared with the AA group, weight loss recovery occurred in the AA+MNH (L) and AA+MNH (H) groups, and significant changes were observed after the sixth day. In the visual evaluation of the colonic mucosa, a significant decrease in damage indicators was observed in the AA+MNH (L) and AA+MNH (H) groups compared with the AA group. In terms of anatomical histological changes and changes in the expression of tumor necrosis factor-α and interleukin-6 in colon tissue, a significant decrease was observed in the AA+MNH (L) and AA+MNH (H) groups compared with the AA group. A more pronounced decrease was observed in the AA+MNH (H) group compared with the AA+MNH (L) group. Conclusion: The effects of MNH on colitis were confirmed through research. MNH can be used as a first-line treatment for patients complaining of colitis who visit oriental medicine clinics.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1541-1549
• /
• 2013

This study investigates the response of structures to tunnelling-induced ground movements in sand ground, varying tunnel excavation condition (tunnel depth and diameter), tunnel construction condition (ground loss), ground condition (loose sand and dense sand). Four-story block-bearing structures have been used because the structueres can easily be characterized of the extent of dmages with crack size and distribution. Numerical parametric studies have been used to investigae of the response of structures to varying tunnelling conditions. Numerical analysis has been conducted using Discrete Element Method (DEM) to have real cracks when the shear and tensile stress exceed the maximum shear and tensile strength. The results of structure responses from various parametric studies have been integrated to consider tunnel excavation condition, tunnel construction condition, and ground condition and provided as a relationship chart. Using the chart, the response of structures to tunnelling can easily be evaluated in practice in sand ground.

• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.496-504
• /
• 2015

Roadheader that excavates ground using pick cutters installed on the cutting head is one of the partial-face machines. A conical cutter among pick cutters is excavation tool decreasing the loss of cutter using tungsten carbide insert at the tip of the cutter and it has been widely used in the roadheaders. In this study, durability performance for three kinds of conical cutters was evaluated in copper mines composed of Manto and conglomerate. After field test, the visual inspection as well as the weight loss measurement of pick cutters was carried out to investigate the damage of pick cutters. In addition, CT scan and SEM were performed to check whether or not crack and apertures in pick cutters. As results, the conical cutter with hardfacing was evaluated as having the best durability performance and it was unable to find cracks in all cutters investigated.

• Molecules and Cells
• /
• v.38 no.12
• /
• pp.1079-1085
• /
• 2015

Originally, activins were identified as stimulators of FSH release in reproduction. Other activities, including secondary axis formation in development, have since been revealed. Here, we investigated the influence of activin ${\beta}_A$ on the body, including the gastro-intestinal (GI) tract. Initially, the activin ${\beta}_A$ protein was detected in the serum proportional to the amount of pCMV-rAct plasmid injected. The induced level of activin ${\beta}_A$ in muscle was higher in female than male mice. Subsequent results revealed that stomach and intestine were severely damaged in pCMV-rAct-injected mice. At the cellular level, loss of parietal cells was observed, resulting in increased pH within the stomach. This phenomenon was more severe in male than female mice. Consistent with damage of the stomach and intestine, activin ${\beta}_A$ often led to necrosis in the tip of the tail or foot, and loss of body weight was observed in pCMV-rAct-injected male but not female mice. Finally, in pCMV-rAct-injected mice, circulating activin ${\beta}_A$ led to death at supraphysiological doses, and this was dependent on the strain of mice used. Taken together, these results indicate that activin ${\beta}_A$ has an important role outside of reproduction and development, specifically in digestion. These data also indicate that activin ${\beta}_A$ must be controlled within a narrow range because of latent lethal activity. In addition, our approach can be used effectively for functional analysis of secreted proteins.

• The Korean Journal of Archival Studies
• /
• no.52
• /
• pp.277-313
• /
• 2017

With the enactment of regulations on confidential records management, the management of confidential records has become more important than ever. However, there remains no management method in the field of records management that takes the feature and values of confidential records into consideration. For this, this study processed electronically confidential records managed in a non-electronic environment. In addition, we developed a system that will allow public institutions to manage confidential records independently, that will prevent loss of information because of loss of or damage to the confidential records, and that can be used conveniently in the digital security environment of authorized users to establish a foundation for commercial management. In this study, we analyzed the system configuration requirements according to the international standard for the records management of a confidential records management system and system-related issues such as system design based on the analyzed requirements, system security and encryption, and metadata, the overall process of establishing and outputting secret management records and standard management.