• 제목/요약/키워드: Loss analysis model

검색결과 1,704건 처리시간 0.03초

동해 천해환경에서 측정된 중주파수 전달손실 측정: Rayleigh 및 HFBL 모델과의 비교 (Measurements of mid-frequency transmission loss in shallow waters off the East Sea: Comparison with Rayleigh reflection model and high-frequency bottom loss model)

  • 이대혁;오래근;최지웅;김성일;권혁종
    • 한국음향학회지
    • /
    • 제40권4호
    • /
    • pp.297-303
    • /
    • 2021
  • 천해 환경에서 음파가 장거리 전파되는 경우, 해저면의 비균질성으로 인해 일반적으로 사용하는 Rayleigh reflection 모델을 적용한 음파전달 모의 결과보다 더 큰 전달손실을 보이는 것으로 알려지고 있다. 이에 따라 미 해군은 경험식 기반의 해저면 반사손실(High-Frequency Bottom Loss, HFBL) 모델을 적용하여 음파 전달을 예측하고 있다. 본 연구에서는 여름철 동해 천해환경에서 중주파수(2.3 kHz, 3 kHz)를 이용한 해상실험 전달손실 측정 및 분석이 수행되었다. BELLHOP 모델을 통해 고유음선을 추적한 결과, 임계각보다 낮은 수평입사각에 대해서만 음파가 수 km 이상 장거리 전파되었으며, Rayleigh reflection 모델 기반의 전달손실 예측값과 실측 전달 손실 값과의 차이는 전달거리가 증가함에 따라 점차 증가하는 경향을 보였다. 큰 수평입사각 영역에서 Rayleigh reflection 모델과 HFBL 모델을 비교하여 HFBL의 입력값인 해저면 province 값을 추정한 후, 이를 적용한 전달 손실을 모의하여 실측 전달 손실 값과 비교하였다. 그 결과 BELLHOP 모델의 반사 손실 모델로 경험식 기반의 HFBL을 적용하여 전달 손실을 모의했을 때, 실측 전달 손실과 일치하는 것을 확인할 수 있었다.

Analysis of Radio Interference through Ducting for 2.5 GHz WiMAX Service

  • Son, Ho-Kyung;Kim, Jong-Ho;Kim, Che-Young
    • Journal of electromagnetic engineering and science
    • /
    • 제12권1호
    • /
    • pp.94-100
    • /
    • 2012
  • Radio interference has been occurring in mobile communication services on the southern seashore in Korea. Monitoring the radio interference signal revealed that the main reason for the radio interference was a radio ducting signal coming from the seaside of Japan. In this paper, we have analyzed the effect of interference on WiMAX service using a 2.5 GHz frequency band between Korea and Japan. We focus on the interference scenario from base station to base station and we use the Minimum Coupling Loss (MCL) method for interference analysis and the Advanced Propagation Model (APM) for calculating the propagation loss in ducts. The propagation model is also compared with experimental measurement data. We confirm that the interfering signal strength depends on the antenna height and this result can be applied to deployment planning for each system with an interference impact acceptable to both parties.

아몰퍼스 변압기의 철손해석 (Analysis of Iron Loss in a Amorphous Transformer)

  • 임달호;권병일;윤상백;박승찬;이중호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
    • /
    • pp.79-81
    • /
    • 1993
  • In this paper, the iron loss of a amorphous transformer is calculated by the specific iron loss curve, after calculating flux densities in core using magnetic equivalent circuit method and FEM. In iron loss analysis using FEM, lamination model of amorphous transformer is transformed into anisotropy model, and it is known that the result is almost equal compared with the result of analysis using magnetic equivalent circuit method.

  • PDF

고장 발생에 따른 HVDC 시스템용 TP 케이블의 절연체 수명 손실 분석 (Analysis of Insulation Life Loss due to Fault Occurrence of TP Cable for HVDC Systems)

  • 정우희;이재인;이석주;딘민차우
    • 한국산업정보학회논문지
    • /
    • 제29권4호
    • /
    • pp.55-66
    • /
    • 2024
  • HVDC (high-voltage direct current) 시스템에 TP (thermoplastic) 케이블을 안전하게 사용하기 위해서는 다양한 연구와 테스트를 통해 운전 중 발생할 수 있는 시스템 고장으로 인한 케이블의 수명 손실률 분석이 필요하다. 본 논문에서는 HVDC 시스템 운영 중에 발생할 수 있는 고장 유형에 따른 TP 케이블의 절연체 수명 손실률을 분석하였다. TP 케이블 모델에 고장으로 인한 전력을 인가하고, 2D 유한요소법을 통한 분석 결과를 바탕으로 Arrhenius-IPM (Inverse Power Model)을 적용하여 절연체의 수명 손실률을 분석하였다. 분석결과 절연체 수명 손실률은 전기장 세기의 영향이 높았으며, 고장 발생 시 절연체 내부 측에서 손실률이 가장 높았다. 이러한 결과는 TP 케이블 상용화를 위한 초기 설계 단계에서 중요한 특성으로 사용될 수 있다.

3상 유도 전동기에서의 열손실 사상법을 이용한 열전달-전자기장 연계 수치 해석 모델 개발 (The Model Development of Coupled Thermo-Electromagnetic Analysis in Three-phase Induction Motors by using Heat loss Mapping Method)

  • 김동희;김치원;정혜미;이주;엄석기
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.788-789
    • /
    • 2011
  • A comprehensive thermo-electromagnetic model has been developed to estimate temperature and electromagnetic distribution in an three-phase induction motor under steady state operation. Electromagnetic modeling enables us to predict thermal dissipation rates by eddy-current loss and copper loss in induction motors. Non-uniform temperature distributions are investigated to account for the strong effect of local temperature build-up on the motor performance and expected life-span. For more accurate thermal modeling purpose, Heat loss mapping method, which is matched up with electromagnetic losses and volumetric heat source, is developed and performed analysis. Heat loss mapping method can be greatly used as a design or diagnostic tool for three-phase induction motors with complex structural electromagnetic fields.

  • PDF

네트워크형 복층 도로터널 환기에서의 충격 손실 평가를 위한 수치해석적 연구 (Numerical Analysis on the Estimation of Shock Loss for the Ventilation of Network-type Double-deck Road Tunnel)

  • 박상훈;노장훈;김진
    • 터널과지하공간
    • /
    • 제27권3호
    • /
    • pp.132-145
    • /
    • 2017
  • 과거 도로터널 환기에 있어서 충격 손실은 설계에 반영되지 않았지만, 터널 내 네트워크형 구조로 인해 분기 합류부가 존재하는 복층 도로터널에서는 충격 손실에 의한 압력 손실이 크게 발생할 것이다. 이에 본 연구에서는 네트워크형 구조를 가지는 복층 도로터널 최적 환기 설계를 위하여 분기 합류 지점에서 발생하는 충격 손실에 대한 3D 전산유체역학(CFD) 수치해석 연구를 수행한다. 이를 위해 복층 도로터널 표준단면을 적용한 실제 스케일 모델을 활용하여 전산 유체 역학을 수행하였고 다양한 각도와 차도폭에 대한 충격 손실 계수를 도출하여 기존의 설계 값과 비교 분석하였다. 연구 결과, 분기 구간에서는 30도의 분류 각도를 가진 모델의 충격 손실 계수가 높게 측정되었고, 합류 구간에서는 2차선으로 설계된 모델의 충격 손실 계수가 낮게 측정됨을 확인할 수 있었다. 따라서 분기 합류 각도와 차도폭이 충격 손실 산정에 있어서 중요한 설계 요소가 될 수 있으므로 환기기 용량 산정에 있어서 정확한 설계 인자를 제시할 것으로 판단된다. 본 연구는 3D 전산유체역학(CFD)를 활용하여 확폭 교차 유 무에 따른 분기 합류 지점에서의 충격 손실 계수를 도출하고, ASHRAE 설계 값과 결과를 비교 분석하였다. 확폭 구간이 반영되지 않은 모델은 ASHRAE 값에 비해 최대 3배의 충격 손실 값을 확인하였고, 확폭 구간이 반영된 모델은 최대 2배의 값을 확인할 수 있었다.

Wi-Fi 방송 서비스를 위한 방송 패킷 전송률에 따른 버스트 손실 특성 분석 (Analysis of Bursty Packet Loss Characteristic According to Transmission Rate for Wi-Fi Broadcast)

  • 김세미;김동현;김종덕
    • 한국통신학회논문지
    • /
    • 제38B권7호
    • /
    • pp.553-563
    • /
    • 2013
  • IEEE 802.11 무선 랜 기반 방송 서비스를 제공 할 때 한정적인 무선 자원을 이용하여 다수의 사용자들에게 원활하게 서비스하기 위해 유니캐스트 패킷 대신 방송 패킷을 이용한다. 방송 패킷은 일정한 대역폭을 사용하여 다수의 사용자들에게 동시에 패킷을 전송 할 수 있지만 손실 복원이 어려운 단점 있기 때문에 손실 특성 분석을 통한 효율적인 패킷 복원 방안이 요구 된다. 손실의 특성 중에서 일정 구간에서 다수의 패킷이 연속적으로 손실 되는 구간이 있는데 이를 버스트 손실 구간이라고 한다. 평균 패킷 손실율을 가지더라도 랜덤 손실과 버스트 손실의 특성에 따라 구간별 손실에 차이가 발생하기 때문에 같은 손실 복원 기법을 적용하더라도 복원율의 차이가 발생한다. 따라서 손실의 본질을 분석 하고 이를 고려한 손실 복원 방안에 대한 연구가 필요하다. 본 논문에서는 전송률에 따른 Wi-Fi 방송 실험을 통해 생성된 실제 손실 패턴을 바탕으로 4-상태 마코프 모델을 이용하여 버스트 손실의 특성을 분석 하였다.

MARS-KS 코드를 사용한 ATLAS 실험장치의 MSGTR-PAFS 사고 분석 (Analysis of MSGTR-PAFS Accident of the ATLAS using the MARS-KS Code)

  • 정현준;김태완
    • 한국안전학회지
    • /
    • 제36권3호
    • /
    • pp.74-80
    • /
    • 2021
  • Korea Atomic Energy Research Institute (KAERI) has been operating an integral effects test facility, the Advanced Thermal-Hydraulic Test Loop for Accident Simulation (ATLAS), according to APR1400 for transient experimental and design basis accident simulation. Moreover, based on the experimental data, the domestic standard problem (DSP) program has been conducted in Korea to validate system codes. Recently, through DSP-05, the performance of the passive auxiliary feedwater system (PAFS) in the event of multiple steam generator tube rupture (MSGTR) has been analyzed. However, some errors exist in the reference input model distributed for DSP-05. Furthermore, the calculation results of the heat loss correlation for the secondary system presented in the technical report of the reference indicate that a large difference is present in heat loss from the target value. Thus, in this study, the reference model is corrected using the geometric information from the design report and drawings of ATLAS. Additionally, a new heat loss correlation is suggested by fitting the results of the heat loss tests. Herein, MSGTR-PAFS accident analysis is performed using MARS-KS 1.5 with the improved model. The steady-state calculation results do not significantly differ from the experimental values, and the overall physical behavior of the transient state is properly predicted. Particularly, the predicted operating time of PAFS is similar to the experimental results obtained by the modified model. Furthermore, the operating time of PAFS varies according to the heat loss of the secondary system, and the sensitivity analysis results for the heat loss of the secondary system are presented.

RNN모델에서 하이퍼파라미터 변화에 따른 정확도와 손실 성능 분석 (Analysis of Accuracy and Loss Performance According to Hyperparameter in RNN Model)

  • 김준용;박구락
    • 융합정보논문지
    • /
    • 제11권7호
    • /
    • pp.31-38
    • /
    • 2021
  • 본 논문은 감성 분석에 사용되는 RNN 모델의 최적화를 얻기 위한 성능분석을 위하여 하이퍼파라미터 튜닝에 따른 손실과 정확도의 추이를 관찰하여 모델과의 상관관계를 연구하였다. 연구 방법으로는 시퀀셜데이터를 처리하는데 가장 최적화된 LSTM과 Embedding layer로 히든레이어를 구성한 후, LSTM의 Unit과 Batch Size, Embedding Size를 튜닝하여 각각의 모델에 대한 손실과 정확도를 측정하였다. 측정 결과, 손실은 41.9%, 정확도는 11.4%의 차이를 나타내었고, 최적화 모델의 변화추이는 지속적으로 안정적인 그래프를 보여 하이퍼파라미터의 튜닝이 모델에 지대한 영향을 미침을 확인하였다. 또한 3가지 하이퍼파라미터 중 Embedding Size의 결정이 모델에 가장 큰 영향을 미침을 확인하였다. 향후 이 연구를 지속적으로 이어나가 모델이 최적의 하이퍼파라미터를 직접 찾아낼 수 있는 알고리즘에 대한 연구를 지속적으로 이어나갈 것이다.

A Realistic Path Loss Model for Real-time Communication in the Urban Grid Environment for Vehicular Ad hoc Networks

  • Mostajeran, Ehsan;Noor, Rafidah Md;Anisi, Mohammad Hossein;Ahmedy, Ismail;Khan, Fawad Ali
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제11권10호
    • /
    • pp.4698-4716
    • /
    • 2017
  • Wireless signal transmission is influenced by environmental effects. These effects have also been challenging for Vehicular Ad hoc Network (VANET) in real-time communication. More specifically, in an urban environment, with high mobility among vehicles, a vehicle's status from the transmitter can instantly trigger from line of sight to non-line of sight, which may cause loss of real-time communication. In order to overcome this, a deterministic signal propagation model is required, which has less complexity and more feasibility of implementation. Hence, we propose a realistic path loss model which adopts ray tracing technique for VANET in a grid urban environment with less computational complexity. To evaluate the model, it is applied to a vehicular simulation scenario. The results obtained are compared with different path loss models in the same scenario based on path loss value and application layer performance analysis. The proposed path loss model provides higher loss value in dB compared to other models. Nevertheless, the performance of vehicle-vehicle communication, which is evaluated by the packet delivery ratio with different vehicle transmitter density verifies improvement in real-time vehicle-vehicle communication. In conclusion, we present a realistic path loss model that improves vehicle-vehicle wireless real-time communication in the grid urban environment.