• 한국산학기술학회논문지
• /
• 제14권9호
• /
• pp.4602-4609
• /
• 2013

온도차가 극심한 하절기와 동절기 콘크리트 타설의 경우 각종 균열의 발생, 콘크리트 품질불량, 내구성 및 강도저하 등 다양한 문제를 야기 시키고 있다. 특히 원전콘크리트의 경우 대량의 타설로 인한 4계절 연속시공이 이루어져 서중환경에서 콘크리트 품질관리에 많은 문제점이 발생되고 있는 실정이다. 이에 본 연구에서는 서중환경에서 많이 사용되어지는 프리쿨링 공법 중 배합수 냉각방법과 지연제 사용이 원전콘크리트의 특성에 미치는 영향을 검토하였다. 배합수 냉각방법은 냉수 $5^{\circ}C$와 Ice Flake 50% 치환사용 하였으며, 지연제 사용에 따른 원전콘크리트의 굳지 않은 콘크리트 및 경화 후 콘크리트의 특성을 검토하였다. 굳지 않은 콘크리트 특성으로는 슬럼프, 공기량, 응결시간 및 경화 후 압축강도를 측정하였으며, 단열거푸집을 제작하여 손실되는 열을 최소화시켜 각 온도조건하에서 수화열을 측정하였다. 실험결과, 슬럼프 및 공기량 경시변화 종료시간은 $20^{\circ}C$에서 120분, $40^{\circ}C$에서 40분으로 나타났으며, 관입 저항에 의한 응결시간은 배합수 냉각방법 및 지연제 사용 모두 초결과 종결을 지연시키는 것으로 나타났으나, 외기온도가 상승할수록 지연폭은 감소하는 것으로 나타났다. 수화열은 배합수 냉각방법 모두 최고온도의 저감과 도달시간을 지연시키는 것으로 나타났으나, 지연제 사용의 경우 최고온도 저감효과는 없는 것으로 나타났다. 또한 재령별 압축강도의 경우 3일, 7일의 초기재령에서 Plain과 비교하여 낮은 강도 값을 나타내었으나, 재령 28일에서는 설계기준강도를 모두 만족시키는 것으로 나타났다.

• Journal of Chest Surgery
• /
• 제34권6호
• /
• pp.454-464
• /
• 2001

배경: 개심술 시 체외순환회로 및 산화기의 합성표면에 대한 혈액의 접촉은 백혈구를 활성화시켜 전신 염증 반응을 일으키며, 활성화된 백혈구에 의해 생성된 산소유리기는 수술 후 심장 및 폐기능 손상의 주요 원인이 된다. 저자들은 체외순환동안 백혈구 제거필터 사용에 따른 임상효과를 평가하기 위해 본 연구를 실시하였다. 대상 및 방법: 성인 심장질환 환자 30명을 대상으로 백혈구 제거필터를 체외순환 회로에 포함시켜 수술한 필터군(n=15)과 필터를 사용하지 않은 대조군(n=15)으로 분류한 뒤, 테외순환 동안 말초혈액 내 백혈구 및 혈소판 수의 변화, 체외순환 전과 후의 관상정맥동혈액 내 malondialdehyde(MDA), troponin-T(TnT), 5'-nucleotidase(5'-NT의 농도변화, 대동맥 교차차단 해제 후 심박동 자연회복률, 수술 전과 후의 심장지수 및 폐혈관 저항의 변화, 수술 후 출혈량, 혈액제제 사용량과 창상 합병증 발생률 등을 양 군간에 비교하였다. 결과: 체외순환 종료 시 총 백혈구 수는 필터군이 대조군에 비해 유의하게 낮았으나(9,567$\pm$842/㎣ vs 13,573$\pm$1,167/㎣, p<0.01), 혈수판 수는 양 군간에 차이가 없었다(138,133$\pm$10,519/㎣ va 156,733$\pm$10,735/㎣, p=0.22). 수술 직후 관상정맥동 혈액내 MDA(3.78$\pm$0.31$\mu$mo1/L vs 5.86$\pm$0.65$\mu$mo1/L, p<0.01), TnT(0.40$\pm$0.04 ng/mL vs 0.59$\pm$0.08 ng/mL, p<0.05), 그리고 5'-NT(3.88$\pm$0.61 U/L vs 5.08 $\pm$0.90 UL, p<0.05) 등의 활성도는 필터군이 대조군 보다 더 낮았다(p<0.05). 수술후 심장지수는 필터군이 대조군보다 높았고(3.26$\pm$0.18 L/$m^2$/min vs 2.75$\pm$0.17 L/$m^2$/min, p=0.05), 폐혈관 저항은 필터군이 대조군 보다 낮았다(65.87$\pm$7.59 dyne/sec/ $cm^{5}$ vs 110.80$\pm$12.22 dyne/sec/$cm^{5}$ , p.0.01). 수술 후 심박동 자연회복률은 필터군이 대조군 보다 높았고(12명 vs 8명, p<0.05), 수술 후 창상합병증 발생률은 필터군이 대조군보다 낮았다(1명 vs 4명, p<0.05). 수술 후 첫 24시간 출혈량은 필터군이 대조군보다 많았다.(614$\pm$ 107 mL vs 380$\pm$71 mL, p=0.05).

• 한국식품과학회지
• /
• 제33권5호
• /
• pp.567-573
• /
• 2001

본 연구에서는 한국인 분변으로 부터 분리, 동정된 Lactobacillus 속 균주의 종별 출현빈도, 산 생성능, 인공 위액 및 인공 담즙에 대한 내성, cholesterol 저하능력 등이 검토되었다. 생후3일부터 37세까지의 총 13명의 남·여의 분변으로부터 총 52균주의 Lactobacilli가 분리되었고 이 중 L. acidophilus가 19주로 가장 많았으며 다음으로 L. plantarum 순이었다. 분리주 중 L. acidophilus로 동정된 17주와 L. casei로 동정된 3주에 대해서 생리적 특성을 검토한 바 각각 다음과 같은 결과가 얻어졌다. 인공위액에 대한 내성 실험결과 L. acidophilus a-4는 pH 2.5에서 3시간 경과 후에도 전혀 사멸하지 않고 100% 생존하는 것으로 나타났으며, L. acidophilus a-2와 L. casei b-3도 75%이상의 높은 생존율을 나타내었다. 나머지 13주는 40%이하의 생존율을 나타내어, 균주 별로 인공위액에 대한 내성은 큰 차이를 나타났다. 내 담즙성을 측정한 결과 L. acidophilus a-3를 포함한 4주는 성장에 지장을 받지 않았으나 대부분의 분리 균주는 생균수가 처리전 보다 $54{\sim}99%$ 정도로 감소되는 것으로 나타나 인공위액 내성과 마찬가지로 균주에 따라 편차가 큰 것으로 나타났다. 환원 탈지유를 이용한 산생성능에 있어서는 두 L. acidophilus 균주 (a-2 및 a-16)가 60시간 경과 후 $2.1{\sim}2.3%$의 적정 산도까지 도달하였고 이때 pH는 $3.5{\sim}3.6%$이었다 60시간 배양 후 적정 산도가 0.8%에 도달하지 못한 것은 총 20주중 10주였다. 한편 cholesterol 저하능을 측정한 결과 공시한 20개 분리주 중에서 L. acidophilus a-2 주와 a-6 주가 70% 이상의 우수한 저하능력을 나타냈고, 12균주가 60% 이상의 저하능을 나타냈다. cholesterol 저하능은 동일 균종이라 하더라도 분리원(사람)은 물론 동일 분리원에서 유래된 균주 간에도 큰 차이가 나타났다. 담즙산에 대한 내성과 cholesterol 저하능력과의 관련성은 상호간의 유의적인 관계가 없는 것으로 나타났다. 결론적으로 본 실험에서 얻은 몇 균주는 인체에 섭취될 경우 사멸하지 않고 소화관 하부까지 도달할 수 있는 잠재성이 있었으며, 따라서 이들 분리주는 정장제로 이용될 수 있다고 생각되었다.

• 대한화장품학회지
• /
• 제42권2호
• /
• pp.111-118
• /
• 2016

여드름은 면포, 구진, 낭종, 결절, 색소 침착 등 다양한 피부병변으로 나타나는 모낭피지선의 만성 염증질환으로 사춘기부터 성인기까지 발생 연령대가 다양해지고 있다. 한편, 약물 부작용으로 여드름이 발생하기도 하는데, 표피성장인자(epidermal grouwth factor, EGF) 수용체 억제제 항암제를 사용할 경우 75 ~ 100%에서 여드름양 모낭염이 발생된다고 보고되고 있다. 여드름의 치료로 항생제, 레티노이드 경구 복용 및 외용 약제 도포 등 다양한 방법이 이용되고 있다. 그러나 최근 들어 레티노이드 기형 유발 가능성 및 Propionibacterium acne의 항생제 내성률 증가는 기존 치료의 한계로 여겨진다. 따라서 본 연구는 최근 여드름양 발진에 효과가 있다고 알려진 EGF를 함유한 외용제가 여드름 치료에 미치는 효과와 안정성을 평가하였다. 한국 성인 10 ~ 29세 23명을 대상으로 EGF 함유 제품(트러블컨트롤 EGF)과 3종 제품(트러블컨트롤 클래리파잉 클렌징폼, 트러블컨트롤 올-클리어 필링토너, 레드롤 카밍 모이스처)을 하루 두 번 사용하도록 하였다. 사용 후 영상 피지량, 경표피수분손실량, 피부 홍조 측정, 전문가 육안 평가, 사용 후 만족도 설문조사를 평가하였다. 최종 측정 시, 피부 피지량, 경피수분손실량, 피부 홍조가 통계학적으로 감소하였으며, 전문가 육안 평가에서 여드름 병변(면포, 구진)도 통계학적으로 감소하였다. 연구동안 심각한 부작용은 관찰되지 않았다. 표피성장인자 함유 외용제는 경도의 여드름에 안전하면서도 효과적으로 사용할 수 있을 것으로 생각된다.

• 산업식품공학
• /
• 제15권1호
• /
• pp.56-63
• /
• 2011

쌀국수 제품의 품질을 향상시키기 위한 방법으로서 기존의 쌀국수에 파스타가 지닌 물성 및 조리 상의 장점을 접목하고자 파스타의 제조원료인 세몰리나를 글루텐이 소량 첨가된 쌀가루에 대해 함량을 달리하여(0-20%, w/w) 대체하여 생면을 제조하였다. 제조된 생면을 끓인 조리면의 품질을 측정한 결과 전분노화가 다소 억제되며, 씹는 맛("ldente")이 증가하고, 끓이는 과정에서 일어나는 전분유출이 감소하여 전반적으로 제품의 품질이 향상되었다. 생면의 제조과정에서는 반죽의 점성 이 커져 반죽이 잘 뭉치고 단단해져 면대형성이 향상되는 효과가 기대되었다. RVA 측정에 따른 전분혼합액의 호화개시온도(pasting time)는 10% 첨가까지는 거의 영향이 없다가 20% 첨가구에서 최고 1.2 증가한 반면 최고점도(peak viscosity)는 첨가량 15% 이상부터 큰 폭으로 감소하였다. 전분의 breakdown값 역시 세몰리나 첨가량이 늘수록 급격히 줄어 shear thinning이 줄어들며 10% 이상 첨가구에서 최종점도(final viscosity)와 setback값 차이가 크게 줄어 노화억제에 의해 조리면이 딱딱해지는 정도가 감소하는 효과가 예상되었다. 생면을 끓일 때 국수에 의한 수분흡수가 낮아져 조리면의 중량 및 부피 변화가 감소되었으며 국물의 탁도가 증가되지 않아 전분침출 억제기능이 확인되었다. 조리면의 색도에 명도(L)는 감소하였으며 적색도(a)와 황색도(b)가 증가하였으나 일정 수준(15%) 이상이 되면 그 영향이 적게 나타났다. 적은 양(5%)의 세몰리나 첨가에 의해서도 Texture Analyzer로 측정된 경도(hardness), 탄력성(springiness), 응집성(cohesiveness), 검성(gumminess) 및 씹힘성(chewiness)과 같은 모든 텍스쳐 특성치 및 인장강도가 소량(5%)의 첨가에 의해서도 현저히 증가하였으나 10% 이상에서는 변화폭이 줄어는 공통적인 변화양상을 보였다. 이상의 결과를 토대로 세몰리나를 첨가한 쌀국수를 제조하는 경우 원료비용 및 기능성을 고려할 때 쌀가루:세몰리나 최적 첨가비율은 9:1(10%, w/w)로 제시되었다.

• Tuberculosis and Respiratory Diseases
• /
• 제42권3호
• /
• pp.277-294
• /
• 1995

연구 배경: 우리나라에서 과거 30년 동안 결핵 유병률은 현저히 감소되어 왔으나 비결핵항산균에 의한 질병의 발생빈도는 아직 정확하게 알려져 있지 않다. 대한결핵 및 호흡기학회는 전국 실태조사를 통하여 현재까지 확인된 전국의 비결핵항산균증 발생 현황을 파악하고 이를 분석하여 외국의 보고와 비교함으로써 일반 개업의 및 내과 전문의의 진료 활동에 도움이 되도록 하고자 본 사업을 시행하였다. 방법: 조사와 분석은 1981년 1월부터 1994년 10월까지 대한결핵협회 결핵연구원에 의뢰된 검체중 비결핵항산균의 종(species)이 확인된 158예를 대상으로 검사를 의뢰한 병원의 진료의에게 증례 기록지를 보내어 정확한 임상 및 검사 정보를 기록하여 회신 하도록하는 후향적 조사 방법으로 그 결과를 수집 분석하였다. 결과: 1) 연도별로 보면 1981년에 1예, 1982년 2예 등으로 1990년 이전에는 매년 10예 미만 이던 것이 1991년에 14예, 1992년 10예, 1993년 4예, 1994년에는 96예로 1990년 이후가 전체의 84.2%를 차지하였다. 2) 연령은 10대 1예, 20대 6예, 30대 15예, 40대 19예, 50대 27예, 60대 51예, 70세 이상 39예로 60세 이상이 전체의 57%를 차지하였다 성별 분포는 남자 114예(72.1%), 여자 44예(27.9%) 이었다. 3) 병원별 분포는 복십자의원 61예(38.6%), 보건소 42예(26.6%), 3차기관 21예(13.3%), 2차기관 15예(9.5%), 1차기관 10예(6.3%) 이었으며, 지역별 분포는 서울 98예(62%), 경상북도 17예(10.8%), 경기도 12예(7.6%), 충청남도 8예(5.1%), 경상남도와 충청북도 각각 5예(3.2%), 기타 지역이 6예(3.8%) 이었다. 4) 선행 폐 질환은 폐결핵 113예(71.5%), 기관지확장증 6예(3.8%), 만성 기관지염 10예(6.3%), 폐섬유증 6예(3.8%) 등이었다. 폐결핵의 발병 시기는 1년 이내가 7예(6.2%), 2~5년전 32 예(28.3%), 6~10년전 29예(25.7% ) 등으로 2~10년전이 전체의 54%를 차지하였다. 폐결핵의 치료 기간은 3개월 이내가 6예로 5.3%이었으며, 4~6개월이 17예(15%), 7~9개월 16예(14.2%), 10~12 개월 11예(9.7%), 1~2년 21예(18.6%), 2년 이상 8예로 7.1% 이었다. 폐결핵의 치료 결과는 완치가 44예(38.9%), 치료 설패가 25예(22.1%) 이었다. 5) 동반된 폐외질환은 만성 간질환과 만성 산부전이 함께 있었던 경우 각각 1예를 포함하여 당뇨병이 9예(5.7%)에서 있었으며, 심혈관계질환 2예(1.3%), 장기간 스테로이드를 투여 받은 경우 2예(1.3%) 그리고 만성 간질환, 만성 신부전, 대장염 및 진폐증이 각 1예(0.6%)씩 있었다. 6) 비결핵항산균증이 발현한 임상상은 만성 폐 감염증 86예(54.4%), 경부 및 기타 임파선염 1예(0.6%), 기관지 결핵 3예(1.9%), 장결핵 1예(0.6%) 이었다. 7) 임상 소견은 기침 62%, 객담 61.4%, 호흡곤란 30.4%, 객혈 및 혈담 20.9%, 체중 감소 l3.3%, 발열 6.3%, 기타 4.4% 등 이었다. 8) 흉부 X-선 소견은 정상 7예(4.4%), 경증 20예(12.7%), 중등증 67예(42.4%), 중증 47예(29.8%)이었으며, 공동은 43예(27.2%)에서 동반되었고, 흉막염은 18예(11.4%)에서 동반되었다. 9) 비결핵항산균이 확언된 검사물은 객담 143예(90.5%), 객담 및 기관지세척액 4예(2.5%), 기관지세척액 1예(0.6%) 이었다. 동정된 비결핵항산균의 종류는 M. avium-intracellulare가 104예로 전체의 65.2%를 차지하였고 M. fortuitum 20예(12.7%), M. chelonae 15예(9.5%), M. gordonae 7예(4.4%), M. terrae 5예(3.2%), M. scrofulaceum 3예(1.9%), M. kansasii와 M. szulgai가 각각 2예(1.3%), 그리고 M. avium-intracellulare와 M. terrae가 동시에 확인된 경우가 1예(0.6%) 이었다. 10) 도말 및 배양 검사 결과는 4번의 검사 중 도말 음성, 배양 양성인 경우는 첫번째 검사상 59예로 37.3%이었고, 두번째 검사에서는 22.8%, 세번째 검사에서는 15.2%, 네번째 검사에서는 14.6% 이었으며, 도말 양성, 배양 양성인 경우는 첫번째 검사상 48예로 30.4% 이었고, 두번째와 세번째 검사에서는 각각 34예(21.5%), 네번째 검사에서는 22예(13.9%)이었다. 이상의 배양 검사 결과를 종합하면 4번 검사한 것 중에서 4회 모두 배양 양성으로 확인된 경우가 21예(13.3%)이었고 3회 배양 양성은 37예(23.4%), 2회 배양 양성은 38예(24.1%)로 2번 이상 배양 양성으로 확인된 경우는 총 96예(60.8%) 이었다. 11) 모든 비결핵항산균에 대한 약제 내성률은 INH 62%, EMB 55.7%, RMP 52.5%, PZA 34.8%, OFX 29.1%, SM 36.7%, KM 27.2%, TUM 24.1%, CS 23.4%, TH 34.2%, PAS 44.9% 이었다. M. avium intracellulare에 대한 내성률은 INH 62.5%, EMB 59.6%, RMP 51.9%, PZA 29.8%, OFX 33.7%, SM 30.8%, KM 20.2%, TUM 17.3%, CS 14.4%, TH 31.7%, PAS 38.5%이었다. M. chelonae에 대한 내성률은 INH 66.7%, EMB 66.7%, RMP 66.7%, PZA 40%, OFX 26.7%, SM 66.7%, KM 53.3%, TUM 53.3%, CS 60%, TH 53.3%, PAS 66.7% 이었다. M. fortuitum 에 대한 내성률은 INH 65%, EMB 55%, RMP 65%, PZA 50%, OFX 25%, SM 55%, KM 45%, TUM 55%, CS 65%, TH 45%, PAS 60% 이었다. 12) 비결핵항산균증의 치료는 129예(81.7%)에서 시행하였으며, 1차 치료 처방 중 INH와 RMP을 포함하는 복합 처방은 86예(66.7%) 이었고, INH 혹은 RMP 중 한가지만을 포함하는 처방은 30예(23.3%), INH와 RMP이 포함되지 않은 처방은 9예(7%)에서 있었다. 2차 치료를 시행한 65예의 처방은 2제 이하 2예(3.1%), 3제 15예(23.1%), 4제 20예(30.8%), 5제 9예(13.8%), 6제이상 19예(29.2%) 이었다. 치료 후 경과는 36예(27.9%)에서 호전, 65예(50.4%)에서 변화 없었으며, 4예(3.1%)에서 악화 4예(3.1%)에서 사망하였다. 호전된 경우 34예(94.4%)에서 균 음전이 확인되었으며, 균 음전 시기는 1개월 이내 2예(5.9%), 3개월 이내 11예(32.4%), 6개월 이내 14예(41.2%), 1년 이내 2예(5.9%), 1년 이상 1예(2.9%) 등 이었다. 결론: 비결핵항산균증 전국실태조사 결과 아직 우리나라에서 확인된 비결핵항산균 감염 예가 많지 않으나 1990년 이후 비결핵항산균증이 현저히 증가하는 경향이었으므로 앞으로 이에 대한 임상의들의 관심이 더욱 필요하리라 생각된다.

• 한국균학회소식:학술대회논문집
• /
• 한국균학회 2015년도 춘계학술대회 및 임시총회
• /
• pp.45-46
• /
• 2015

Clubroot disease of crucifers has occurred since 1957. It has spread to the whole China, especially in the southwest and nourtheast where it causes 30-80% loss in some fields. The disease has being expanded in the recent years as seeds are imported and the floating seedling system practices. For its effective control, the Ministry of Agriculture of China set up a program in 2010 and a research team led by Dr. Yueqiu HE, Yunnan Agricultural University. The team includes 20 main reseachers of 11 universities and 5 institutions. After 5 years, the team has made a lot of progresses in disease occurrence regulation, resources collection, resistance identification and breeding, biological agent exploration, formulation, chemicals evaluation, and control strategy. About 1200 collections of local and commercial crucifers were identified in the field and by artificiall inoculation in the laboratories, 10 resistant cultivars were breeded including 7 Chinese cabbages and 3 cabbages. More than 800 antagostic strains were isolated including bacteria, stretomyces and fungi. Around 100 chemicals were evaluated in the field and greenhouse based on its control effect, among them, 6 showed high control effect, especially fluazinam and cyazofamid could control about 80% the disease. However, fluzinam has negative effect on soil microbes. Clubroot disease could not be controlled by bioagents and chemicals once when the pathogen Plasmodiophora brassicae infected its hosts and set up the parasitic relationship. We found the earlier the pathogent infected its host, the severer the disease was. Therefore, early control was the most effective. For Chinese cabbage, all controlling measures should be taken in the early 30 days because the new infection could not cause severe symptom after 30 days of seeding. For example, a biocontrol agent, Bacillus subtilis Strain XF-1 could control the disease 70%-85% averagely when it mixed with seedling substrate and was drenching 3 times after transplanting, i.e. immediately, 7 days, 14 days. XF-1 has been deeply researched in control mechanisms, its genome, and development and application of biocontrol formulate. It could produce antagonistic protein, enzyme, antibiotics and IAA, which promoted rhizogenesis and growth. Its The genome was sequenced by Illumina/Solexa Genome Analyzer to assembled into 20 scaffolds then the gaps between scaffolds were filled by long fragment PCR amplification to obtain complet genmone with 4,061,186 bp in size. The whole genome was found to have 43.8% GC, 108 tandem repeats with an average of 2.65 copies and 84 transposons. The CDSs were predicted as 3,853 in which 112 CDSs were predicted to secondary metabolite biosynthesis, transport and catabolism. Among those, five NRPS/PKS giant gene clusters being responsible for the biosynthesis of polyketide (pksABCDEFHJLMNRS in size 72.9 kb), surfactin(srfABCD, 26.148 kb, bacilysin(bacABCDE 5.903 kb), bacillibactin(dhbABCEF, 11.774 kb) and fengycin(ppsABCDE, 37.799 kb) have high homolgous to fuction confirmed biosynthesis gene in other strain. Moreover, there are many of key regulatory genes for secondary metabolites from XF-1, such as comABPQKX Z, degQ, sfp, yczE, degU, ycxABCD and ywfG. were also predicted. Therefore, XF-1 has potential of biosynthesis for secondary metabolites surfactin, fengycin, bacillibactin, bacilysin and Bacillaene. Thirty two compounds were detected from cell extracts of XF-1 by MALDI-TOF-MS, including one Macrolactin (m/z 441.06), two fusaricidin (m/z 850.493 and 968.515), one circulocin (m/z 852.509), nine surfactin (m/z 1044.656~1102.652), five iturin (m/z 1096.631~1150.57) and forty fengycin (m/z 1449.79~1543.805). The top three compositions types (contening 56.67% of total extract) are surfactin, iturin and fengycin, in which the most abundant is the surfactin type composition 30.37% of total extract and in second place is the fengycin with 23.28% content with rich diversity of chemical structure, and the smallest one is the iturin with 3.02% content. Moreover, the same main compositions were detected in Bacillus sp.355 which is also a good effects biocontol bacterial for controlling the clubroot of crucifer. Wherefore those compounds surfactin, iturin and fengycin maybe the main active compositions of XF-1 against P. brassicae. Twenty one fengycin type compounds were evaluate by LC-ESI-MS/MS with antifungal activities, including fengycin A $C_{16{\sim}C19}$, fengycin B $C_{14{\sim}C17}$, fengycin C $C_{15{\sim}C18}$, fengycin D $C_{15{\sim}C18}$ and fengycin S $C_{15{\sim}C18}$. Furthermore, one novel compound was identified as Dehydroxyfengycin $C_{17}$ according its MS, 1D and 2D NMR spectral data, which molecular weight is 1488.8480 Da and formula $C_{75}H_{116}N_{12}O_{19}$. The fengycin type compounds (FTCPs $250{\mu}g/mL$) were used to treat the resting spores of P. brassicae ($10^7/mL$) by detecting leakage of the cytoplasm components and cell destruction. After 12 h treatment, the absorbencies at 260 nm (A260) and at 280 nm (A280) increased gradually to approaching the maximum of absorbance, accompanying the collapse of P. brassicae resting spores, and nearly no complete cells were observed at 24 h treatment. The results suggested that the cells could be lyzed by the FTCPs of XF-1, and the diversity of FTCPs was mainly attributed to a mechanism of clubroot disease biocontrol. In the five selected medium MOLP, PSA, LB, Landy and LD, the most suitable for growth of strain medium is MOLP, and the least for strains longevity is the Landy sucrose medium. However, the lipopeptide highest yield is in Landy sucrose medium. The lipopeptides in five medium were analyzed with HPLC, and the results showed that lipopeptides component were same, while their contents from B. subtilis XF-1 fermented in five medium were different. We found that it is the lipopeptides content but ingredients of XF-1 could be impacted by medium and lacking of nutrition seems promoting lipopeptides secretion from XF-1. The volatile components with inhibition fungal Cylindrocarpon spp. activity which were collect in sealed vesel were detected with metheds of HS-SPME-GC-MS in eight biocontrol Bacillus species and four positive mutant strains of XF-1 mutagenized with chemical mutagens, respectively. They have same main volatile components including pyrazine, aldehydes, oxazolidinone and sulfide which are composed of 91.62% in XF-1, in which, the most abundant is the pyrazine type composition with 47.03%, and in second place is the aldehydes with 23.84%, and the third place is oxazolidinone with 15.68%, and the smallest ones is the sulfide with 5.07%.

• 한국작물학회지
• /
• 제34권s02호
• /
• pp.45-65
• /
• 1989

우리나라는 지형과 기후가 복잡다양한 데다가 하절기에는 필리핀 남양군도로부터 상습적으로 불어오는 태풍의 진로권내에 위치해 있고 년간 강우량의 대부분이 벼 재배기인 하절기에 집중적으로 내리는 관계로 이때 강우와 강풍이 단독 또는 동반하여 갖가지 풍수해양상을 일으킨다. 풍해는 조풍해, 건조풍해 및 강풍해로 구분하여 볼 때 조풍해(염풍해)는 1986년 8월 28~29일 태품 Vera호 내습시 남부 해안지방 일대에서는 강우가 그치면서 염분을 함유한 초속 6m정도의 강풍이 불어 해안으로부터 2.5km까지 도체 조기에 염분을 건물당 1.1~17.2mg 부착시켜 심한 조풍해를 일으켰다. 그리고 건조풍해는 '87년 이래로 내습한 대부분의 태풍들이 4.0~8.5m의 태풍이 남부 및 동해안에 불어 Foenhn 현상으로 건조풍이 되고 이때 출수기에 처한 벼 이삭은 심한 백수피해와 변색위피해를 받았다. 태풍해로서는 풀수기 이전의 벼 생육단계에서 경엽이 기계적으로 절상, 파열, 고사되고, 등숙기에는 도복과 탈입이 심하게 된다. 풍해경감은 태품 내습을 회피하도록 8월 15일까지 출수시키고 풍해저항성이 비교적 강한 상풍벼와 청청벼 재배가 효과적이다. 한편 수해로서는 농경지 유시, 이몰, 침관수 및 도복 등을 들 수 있으나 각종 Dam, 제방축조, 하구언공사 등으로 피해는 많이 줄었지만 국지적 집중호우나 강변유역 제방내의 내수로 인한 침관수나 도복피해는 상습적으로 일어난다. 핌관수해는 태풍과 다우가 주로 8월 말경에 내습하여 2~4일 정도 도체가 관수된다. 이따 남부 특수만식답의 벼생육단계는 생육초중기에 해당되므로 어린 생육단게일수록 피해가 크고 보통식세어는 생식생장기에 해당되므로 유수나 팬이삭은 불념이 되더라도 죽은 이삭을 갖는 경의 상위절로부터 재생경이 나와 정상이삭으로 되어 수량 감소가 가장 튼 감수분열기 피해에서도 66%의 수량보상력을 갖게 된다. 침관수피해 경감을 위해서는 사전적 조처로서 관수저항성 및 백엽고, 벼멸구, 도복저항성을 갖는 품종을 선택 재배하는 것이 효과적이다. 특히 통일형 품종은 일본형 품종에 비하여 관수시 모든 생육단게에서 관수저항성이 강한데 묘생존율이 높고, 엽신과 엽초의 이상신장력이 낮아 퇴수시 기술적 장해가 적으며 생식생장기에는 근활력, 광합성능력이 높아 피해회복이 빠르고 고위절분얼이삭에 의한 수량보상력이 높다. 이상을 종합하여 볼 때 풍수해를 최소화하기 위해서는 다음과 같은 연구가 금후 이루어져야 할 것이다. \circled1 기상예보, 풍수해 피해실태 및 그로 인한 작황 등의 원격탐사 및 전산화에 의한 분석 연구가 이루어져야 하고, \circled2 품수해와 관련된 불량환경에서 내성을 갖는 품종 육성 보급이 이루어져야 하고, \circled3 품수해 발생상습지에서는 벼 피해를 보상할 수 있는 타작물과의 함리적 작부체계 개선 연구가 이루어져야 하고, \circled4 피해도체의 활용도 증진 연구가 이루어져야 할 것이다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.