• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.668-673
• /
• 2005

This paper proposes a simple actuator with a spherical rotor for robot's eyeball, which has two degrees of freedom. It features that both permanent magnets and coils are equipped in a stator and the spherical rotor with steps on its surface is driven by reaction of Lorentz force acting on the fixed coils. Such a structure is helpful to design a simple actuator and particularly suitable for a spherical actuator. Based on the FEM analysis, design parameters such as the sizes of core and permanent magnet, the width of step, coil turns and maximum current, are determined so as to maximize the torque and rotating angle. For the experimental verification of the feasibility, a prototype is manufactured and its operating characteristicsareinvestigated.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.876-877
• /
• 2007

This paper presents the MHD characteristics of the liquid metal flow using an electromagnetic force. The flow velocity has been calculated by treating the Lorentz force as a source term in the Navier-Stokes equation. The liquid metal flow in duct using an electromagnetic pump was analyzed with the Lorentz force varied.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.9
• /
• pp.1341-1349
• /
• 2001

In this paper, 3 D.O.F. actuator, which has three degrees of freedom in one joint, is proposed. The proposed 3 D.O.F. spherical actuator is composed of the rotor and atator. The upper plate of the stator supports the rotor and five electromagnets are located at the base of the stator. The rotor has two permanent magnets, and each rotational axis of the rotor gimbal system is supported by the bearing. To find out the governing equations for the torque generation, Coulombs law and Lorentz force with respect to magnetism is applied. As the experimental results, if the distance between electromagnet and permanent maget is far enough, the force between these magnets can be expressed from current of coils and z-axial distance. For the purpose of control 3 D.O.F. actuator, PID control law is applied. The experimental results are presented to show the validity of the proposed 3 D.O.F. actuator.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.9-10
• /
• 2007

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.125-128
• /
• 1994

One of the abnormal motions of the projectile in the coil gun is spinning. It is found that the spinning force is closely related with air gap distance. Modified and detail analysis for the spinning is suggested in this paper. Two reasons for spinning force and Lorentz force affecting on the spinning are introduced. Nutation, which is a result of spinning, is explained there after.

• Journal of The Korean Association For Science Education
• /
• v.27 no.2
• /
• pp.126-133
• /
• 2007

The 'Science and Technology Mania' award program is an annual nationwide award activity organized to provide teenagers with opportunities for engaging in a high-technology-based long-term project work. The task involves designing a model ship propelled by the Lorentz force (a Lorentz ship) that allows diverse approaches irreducible to one right answer, and thus adopts features of science and technology in-the-making, In this study, we attend to opportunities for learning science that the uncertain aspects of artifact-designing project provide with participants, particularly when students communicate with scientists about their design practices. We analyze oral presentation sessions of the program and articulate two findings. First, students articulate embodied knowing in the presence of scientists. Second, students enact discursive resources deployed in concrete action. We conclude that students' design practices constitute referent that communication is directed toward and therefore become resources for developing scientific discourse.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.5
• /
• pp.658-665
• /
• 2002

This paper presents a new winding method in electronic descaling (ED) technology. Conventional ED technology Produces an oscillating electric field via Faraday's law to provide the necessary molecular agitation to dissolve mineral ions. However, the proposed method produces an additional agitation force for mineral ions, called Lorentz's force. Experiments were performed using various Renolds numbers. A series of tests was conducted to measure the pressure drop across the test section and the overall heat transfer coefficient as a function of time. In order to accelerate the rate of fouling, artificial hard water, 1000ppm CaCO$_3$, was used throughout the tests. The results show that the new winding method accelerates the collision of the mineral ions, thereby improving the system efficiency. The present study can develope more effective fouling-removing equipment with change of estabishment method of coil.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.7
• /
• pp.733-740
• /
• 2013

The high-velocity electromagnetic forming (EMF) process is based on the Lorentz force and the energy of the magnetic field. The advantages of EMF include improved formability, wrinkle reduction, and non-contact forming. In this study, numerical simulations were conducted to determine the practical parameters for the EMF process. A 2-D axis-symmetric electromagnetic model was used, based on a spiral-type forming coil. In the numerical simulation, an RLC circuit was coupled to the spiral coil to measure various design parameters, such as the system input current and the electromagnetic force. The simulation results show that even though the input peak current levels were at the same level in each case, the forming condition varied due to differences in the frequency of the input current. Thus, the electromagnetic forming force was affected by the input current frequency, which in turn, determined the magnitude of the current density and the magnetic flux density.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.12 s.243
• /
• pp.1567-1573
• /
• 2005

This paper introduces a new active magnetic bearing(AMB) that can provide both radial and axial control functions in one bearing unit without axial disk. It has a structure of double four-pole AMB or a four-pole AMB where each core is split into two axially. The cores have two kinds of coil winding; they independently generate fluxes on the planes perpendicular or parallel to the shaft. For the radial control action, it works just like a conventional four-pole AMB. Meanwhile, for the axial control, it uses the Lorentz force generated by the interaction of the bias flux for radial control and the axial control flux. In this paper, the proposed structure, principle, and design process based on magnetic flux analysis are introduced, and its feasibility is experimentally verified by using a simple PD control algorithm with a feedforward loop to compensate the coupled flux effect.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.12 s.243
• /
• pp.1561-1566
• /
• 2005

In this paper, a new compact active magnetic bearing(AMB) is proposed in which radial and axial bearings are integrated in one bearing unit. It consists of four U-shaped cores circumferentially connected by yokes and two-layer coils for radial and axial controls. For the radial control action, it has the same principle as conventional homopolar AMBs, while for the axial control, it uses the Lorentz force generated by the interaction of the bias flux for radial control and the axial control flux. The proposed structure makes it easy to design a compact AMB because it has no disk for axial control. This paper introduces the proposed structure, principle, and design process based on the magnetic flux analysis. By using a control algorithm with feedforward action to compensate the coupled flux effect, the feasibility of the proposed AMB is experimentally verified.