매체순환식 가스연소기 산소공여입자로 NiO 계열 산소공여입자를 사용할 경우 고온 조건(> $900^{\circ}C$)에서 온도가 증가함에 따라 환원반응 배출기체 중 CO 농도가 증가하게 되며, 이에 의해 연료전환율과 $CO_2$ 선택도가 감소하게 된다. 이러한 고온 환원반응성 저하를 개선하기 위한 방법으로 매체순환 가스연소기에 적용 가능한 금속산화물들에 대해 온도변화에 따른 평형 CO 농도를 계산 및 비교하여 반응성 개선이 가능한 금속산화물을 선정하였다. 선정된 금속산화물을 NiO 계열 산소공여입자와 물리적으로 혼합하는 방법을 적용하여 고온 환원반응성 개선이 가능한지를 회분식 유동층 실험장치를 이용하여 측정 및 해석하였다. $900{\sim}1000^{\circ}C$ 범위에서 기존 NiO 계열 입자(OCN706-1100) 만을 사용한 경우에 비해 $Co_3O_4$ 계열 입자($Co_3O_4/CoAl_2O_4$)를 10% 혼합한 경우가 연료전환율 및 $CO_2$ 선택도가 높게 나타났으며 환원반응 배출기체 중 CO의 농도가 감소하는 경향을 나타내어 $Co_3O_4$ 계열 산소공여입자를 함께 사용하는 방법으로 고온 환원반응성 개선이 가능함을 확인할 수 있었다.
The three-reactor chemical-looping process (TRCL) for the production of hydrogen from natural gas is attractive for both $CO_2$ capture and hydrogen production. In this study, redox property of $Fe_2O_3$ and $WO_3$ supported with $ZrO_2$ and $MgAl_2O_4$ were studied with temperature programmed oxidation/reduction (TPO/R) experiment. All metal oxides were prepared by ball mill method. Metal oxides supported with $ZrO_2$ showed the good redox property in TPO and TPR tests. Reduction behavior was matched well the theoretical reduction mechanism. Metal oxides supported with $MgAl_2O_4$ formed a solid solution ($MgFe_{0.6}Al_{1.4}O_4$, $MgWO_4$). $Fe_2O_3$ showed more narrow reaction range and lower reaction temperature than $WO_3$.
A fully automatic computer simulation technique of axisymmetric multi-stage compound forging processes was presented in this paper. A penalty rigid-viscoplastic finite element method was employed together with an improved looping method for automatically remeshing with quadrilateral finite-elements only. An application example of six-stage axisymmetric forging processes involving one cold and two hot forging processes, two piercing processes and a sizing process was given with emphasis on automatically tracing the metal flow lines through the whole simulation.
A loop structure optimization algorithm is proposed for generting a set of efficient codes for loop structure in order to optimize RISC compiler codes. Since there are so many loop structure in the program, most of the execution time is used to process looping codes. Thus, reduction of loop instructions is more effective than optimizing codes outside the loop. The proposed algorithm presents a method to combine several different loops into a simple loop. Therefore, rather than executing each loop independently, loops in the program are serached, analyzed, and finally created some relative informtion such as dependency and range. In doing so, the loops in the program can efficiently be recombined and restructured. As a result, the overall execution time for the program of the sequential programming language is reduced.
An automatic mesh generation scheme has been developed for finite element analysis with two-dimensional, quadrilateral elements. The basic strategies of the method are to transform the analysis domain into loops with key nodes and the loops are recursively subdivided into subloops with the use of best split lines. Finally by using the basic loop operators, the meshes are completed. In this algorithm an eight-node loop operator is proposed, which is useful in the area where the change of element size is large and the splitting criteria for subdividing the loops have also been modified to the existing algorithms. Lines, arcs, and cubic spline curves are used to define the boundaries of analysis domain. Sample meshes for several geometries are presented to demonstrate the robustness of the algorithm.
중소 PCB 제조업체에서는 외부 생산 환경 변화, 복수개의 제약공정, 많은 공정수, 긴 리드타임, 동일공정 반복생산 등의 특징으로 인하여 효과적인 생산 스케쥴 작성에 많은 어려움을 겪고 있다. 최근 TOC 이론에서 제시하고 있는 DBR기법을 PCB 생산라인에 적용하고자 하는 시도는 진행되고 있으나, 제약공정을 1개만 설정하도록 하는 일반적인 DBR로서는 PCB 생산라인의 특성상 충분한 효과를 기대할 수 없는 현실이다. 따라서 본 논문에서는 PCB 생산라인에서 효과적인 생산스케줄링을 수립하기 위하여 TOC의 DBR기법을 발전시킨 복수 DBR기법을 제시하였다. 또, 실제로 국내 중소 PCB 제조업체에 복수 DBR을 적용하여 제조 리드타임을 20%이상 단축함을 확인하였다.
This paper presents the design technology of a Graphic Generator which drives the embedded aircraft display equipments such as HUD(Head-Up Display) and MFD (Multi-Function Display) those provide pilot with the most important mission information. The main issue of this design is how we can implement the real-time embedded graphic generator using a general purpose processor as a substitute for the obsolete the production of specific graphic processor in the military market. So we proposed two kinds of method that one is a software solution so called graphic kernel system, interpreting the display file, controlling the graphic system and pre-processing graphic primitives, the other is a hardware solution so called graphic engine, interpreting passed commands through the graphic kernel system, post-processing the looping calculation taking much of time as implemented by software. We have tested and verified the functionalities and the required performance of Graphic Generator.
This paper describes a design of cryptographic processor that implements the AES (Advanced Encryption Standard) block cipher algorithm, "Rijndael". An iterative looping architecture using a single round block is adopted to minimize the hardware required. To achieve high throughput rate, a sub-pipeline stage is added by dividing the round function into two blocks, resulting that the second half of current round function and the first half of next round function are being simultaneously operated. The round block is implemented using 32-bit data path, so each sub-pipeline stage is executed for four clock cycles. The S-box, which is the dominant element of the round block in terms of required hardware resources, is designed using arithmetic circuit computing multiplicative inverse in GF($2^8$) rather than look-up table method, so that encryption and decryption can share the S-boxes. The round keys are generated by on-the-fly key scheduler. The crypto-processor designed in Verilog-HDL and synthesized using 0.25-$\mu\textrm{m}$ CMOS cell library consists of about 23,000 gates. Simulation results show that the critical path delay is about 8-ns and it can operate up to 120-MHz clock Sequency at 2.5-V supply. The designed core was verified using Xilinx FPGA board and test system.
매체 순환식 수소제조공정은 직접 고순도의 수소를 생산하는 동시에 $CO_2$ 포집 비용을 최소화할 수 있는 고효율/친환경적인 공정이다. 본 공정은 레독스 반응을 통하여 산소를 전달하고 이때 철 산화물계 산소전달입자를 이용하게 된다. 구리 산화물이 첨가된 철-구리 산화물계 산소전달입자는 반응성 향상이 보고되어 왔으나 철 산화물과 구리 산화물 간 상호작용에 대한 이해가 부족한 실정이다. 본 연구에서는 여러 기기 분석법(SEM/EDX, XRD, BET, TPR, XPS, TGA)을 통하여 철-구리 산화물계 산소전달입자의 레독스 반응성 향상을 지배하는 주요인을 연구하였다. 첨가된 구리 산화물은 철 산화물 성장 억제제 역할 뿐만 아니라 화학적 환경 변화를 일으키는 화학적 촉매제(chemical promoter) 역할도 하는 것이 발견되었다. 철-구리 산화물계 산소전달입자의 우수한 환원 반응성은 구리 산화물의 도입으로 $Fe^{2+}$ 농도 증가 및 표면 특성 변화 때문이며, 우수한 물분해 특성은 산화 과정에서 일어나는 철 산화물의 응집을 구리 산화물이 억제시킨 것으로 판단되었다.
본 논문은 무선 센서 네트워크에 있어서 궤도 기반 매취메이킹 서비스를 위한 질의 이탈 및 이의 방지에 관한 것이다. 이러한 문제는 정보 구독 궤도를 따라 전파되는 질의가 정보 발간 궤도와 기하학적으로는 겹침에도 불구하고 정보를 획득하지 못할 때 발생한다 이에 따라 질의를 재 제출하거나 새로운 구독 궤도를 시작함으로 인한 시간 지연이 초래되어 최악에는, 궤도내의 루핑이나 네트워크 전체로의 메시지 범람을 야기한다. 이 문제를 정형적으로 다루고 그 해결책을 제시한다. 먼저, 노드들이 존재하는 영역을 논리적으로 작은 그리드들로 분할하고, 그리드 기반 멀티캐스트 다음-흡 선택 알고리즘을 제안한다. 제안 알고리즘은 궤도 설정을 직선형태로 유지하도록 시도함은 물론 수신 노드들의 분포 및 틈새 없는 그리드 단위의 멀티캐스트를 고려한다 이러한 알고리즘에 의거하여 정보 발간 및 구독을 시행하는 경우 질의 이탈이 궁극적으로 방지됨을 증명한다. 제안 알고리즘이 탐욕적 송출과 같은 비 그리드 기반 알고리즘과 GAE와 같은 고정 크기의 그리드 접근법 보다 이웃 노드들의 전력을 더 적게 소모함을 알 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.