• 한국산업융합학회 논문집
• /
• 제15권3호
• /
• pp.83-86
• /
• 2012

This study have cross checked the change of internal sludge-recycle in Full-scale Anaerobic-Digestion, and researched about not only the improvement of Bio-gas production from the digested sludge but also the efficient method of sludge minimization. Ultimate aim of the study is to reduce the amount of sludge by the improved efficiency of contact with the organic-matter and the microbes in Anaerobic-Digestion. The sludge-recycle fluidized sludge layer and raised the activity of the sludge, The sludge-recycle ratio of optimum was 500%, VS and COD removal ratio respectively appeared with 67.8% and 70.4%. Through these result of this study, it may be positive view to treat waste sludge by the sludge-recycle ratio in terms of minimization and circulation of resources.

• The International Journal of Costume Culture
• /
• 제7권2호
• /
• pp.77-86
• /
• 2004

The purpose of this study is to characterize physical and tensile properties according to a knitting method as basic materials for solving the difficulties that occur due to the fact that the crosswise elongation is most different among knit stitch at the time of measuring elongation of knitwear. The sample used for this study was wool $100\%$ and was knitted into two, that is, controlled loop length controlled to properties of structure and fixed loop length by using Shimaseiki SES-124S 12G computer automatic flat knitting machine with DSCS device. Also, the density of rib fabric was 12gauge and its quantity was a total of seven of $0{\times}0,\;1{\times}1,\;2{\times}1,\;2{\times}2,\;3{\times}3,\;4{\times}4$ and including plain fabric, and knitted 2 pieces of sample of 300 wale${\times}400$ course. In conclusion, rib stitch has the much higher stretch rate in the direction of the course than other stitches.

• 대한전자공학회논문지
• /
• 제24권4호
• /
• pp.548-552
• /
• 1987

The constraint condition of the loop filter is persented for the convergence of the random jitter accumulation fo the 2-nd order PLL (phase-locked loop) circuit used in digital regenerative repeater. This condition is confirmed under the assumption that the number of repeater chain is 5, bandwidth is 100. 0KHz, the power spectral density of white Gaussian noise is 1.0x10**-6 [W/Hz]. Also, it is shown that if the condition is satisfied, the accumulated random jitter and the alignment jitter will have the saturation characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.90-92
• /
• 2001

The lift and drag forces on various magnet moving with a velocity is developed above a closed loop coil. These forces are affect by resistance and inductance of circuit, velocity of magnet. To obtain strong magnetic flux density, the magnet is replaced by Halbach array. This paper presents analysis of force between linear motion Halbach array and a closed loop having the constant resistance and inductance as a various speed.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.309-314
• /
• 2008

increased heat dissipation and higher heat density of electronic equipment and/or parts released. A loop heat pipe(LHP) has been payed closer attention to the potential candidate of an electronic cooling. As of the LHP with a circular plate type evaporator developed, this study focused on its operating characteristics on the steady state in accordance with charging different working fluid. The relationship between working fluid and operating characteristics is discussed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권12호
• /
• pp.5103-5115
• /
• 2015

In radar imaging, a target is usually consisted of a few strong scatterers which are sparsely distributed. In this paper, an improved sparse signal recovery algorithm based on smoothed l₀ (SL0) norm method is proposed to achieve high resolution ISAR imaging with limited pulse numbers. Firstly, one new smoothed function is proposed to approximate the l₀ norm to measure the sparsity. Then a single loop step is used instead of two loop layers in SL0 method which increases the searching density of variable parameter to ensure the recovery accuracy without increasing computation amount, the cost function is undated in every loop for the next loop until the termination is satisfied. Finally, the new set of solution is projected into the feasible set. Simulation results show that the proposed algorithm is superior to the several popular methods both in terms of the reconstruction performance and computation time. Real data ISAR imaging obtained by the proposed algorithm is competitive to several other methods.

• Nuclear Engineering and Technology
• /
• 제17권4호
• /
• pp.279-289
• /
• 1985

U-tube 증기 발생기 내부의 재순환 loop에서의 밀도파 진동 형태의 불안정성 분석을 하고자 한다. 단상과 2상 영역에서의 압력 강하의 섭동치를 계산하기 위하여, 상간의 slip과 비균일 열유랑 그리고 heated wall dynamics를 고려하여 drift-flux model에 근거를 둔 노드 내의 섭동 보즌 방정식이 유도되었다. Loop를 통한 일정 압력강하 경계조건하에 Nyquist 조건을 사용하여 안정성이 분석되었다. SASG computer program을 개발하여 고리 1호기의 증기 발생기에 대한 안정성을 분석하였으며, 아울러, 중요한 계통인자들의 안정성 여유도에 미치는 영향도 분석하였다.

• 한국자기학회지
• /
• 제24권3호
• /
• pp.76-80
• /
• 2014

토로이드 형태의 자성분말합금 코어의 경우 major B-H loop을 측정하기 위해서는 수십 kA/m 이상의 높은 자화력을 인가하여야 한다. 이 경우 측정과정에서 일차코일에 권선된 에나멜 동선에서 발생하는 열 때문에 측정이 매우 어렵다. 본 연구에서는 토로이드 형태의 자성분말합금 코어 major B-H loop을 직접 측정할 수 있는 장치를 설계 제작하고, 그 성능을 측정하였다. 수십 kA/m 이상의 자화력을 인가하기 위하여 최대 전류가 $100A_P$인 전력 증폭기와 측정 시간 중에 높은 전류에 의하여 코일 권선에서 발생하는 열 문제를 해결하기 위하여 실시간으로 자기 이력 곡선을 측정 할 수 있게 실시간으로 B-H 신호를 디지털신호로 변환하여 컴퓨터 소프트웨어에서 자속밀도 B 와 자화력 H 값을 계산하고, 이 값들로 부터 주요 자기 특성인 최대자속밀도 $B_{max}$, 최대 자화력 $H_{max}$, 보자력 $H_c$, 잔류자속밀도 $B_r$ 및 형상인자(FF)를 계산하여 가상계측기(VI)창으로 표시 할 수 있게 하였다. 제작된 장치를 이용하여 외경이 134 mm, 내경이 77 mm, 높이가 42 mm인 자성분말코어에 일차 코일을 직경이 1 mm인 에나멜 동선을 401회 권선하고 이차 코일을 직경이 0.2 mm인 에나멜 동선 5회 권선하여 측정을 하여 본 결과 최대 인가 자기장을 50 kA/m까지 인가하면서 자기이력곡선을 측정 할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.56-58
• /
• 1996

The Preisach model needs a density function to simulate the hysteresis phenomena. To obtain this function, many experimental data obtained from the first order transition curves are required to get accurate density function. However, it is difficult to perform this procedure, especially for the hard magnetic materials. In this paper, we compare the density function obtained from the experimental data with that computed from the mathematical function like the Gaussian function, and propose a simple technique to get mathematical equation of the density function or Everett function which is obtained from the initial curve, major and minor loop.

• Progress in Superconductivity
• /
• 제14권1호
• /
• pp.1-10
• /
• 2012

We fabricated a closed coils by using resistive-joint method and the joint resistance of the coils were estimated by field decay technique in liquid nitrogen. We used the Runge-kutta method for the numerical analysis to calculate the decay properties. The closed coil was wound by $(Bi,Pb)_2Sr_2Ca_2Cu_3O_x$/Ag tape. Both ends the tape were overlapped and soldered to each other. The current was induced in a closed coils by external magnetic flux density. Its decay characteristic was observed by means of measuring the magnetic flux density generated by induced current at the center of the closed coil with hall sensor. The joint resistance was calculated as the ratio of the inductance of the loop to the time constants. The joint resistances were evaluated as a function of critical current of loop, contact length, sweep time, and external magnetic flux density in a contact length of 7 cm. It was observed that joint resistance was dependent on contact length of a closed coil, but independent of critical current, sweep time, and external magnetic flux density. The joint resistance was measured to be higher for a standard four-probe method, compared with that for the field decay technique. This implies that noise of measurement in a standard four-probe method is larger than that of field decay technique. It was estimated that joint resistance was $8.0{\times}10^{-9}{\Omega}$ to $11.4{\times}10^{-9}{\Omega}$ for coils of contact length for 7 cm. It was found that 40Pb/60Sn solder are unsuitable for persistent mode.