• 동의생리병리학회지
• /
• 제19권5호
• /
• pp.1356-1362
• /
• 2005

The purpose of this study os to investigative the effect of Carrageenan-Induced Pain on lower limb muscle and ligament of rat. To evaluate pain mechanism in muscle and ligament, pain was induced by the injection of 2% $0.1m{\ell}$ carrageenan into the left lower limb muscle of rats after rats were anesthesized with 3% enflurane. Rats were killed on 72 hours after pain induction under the anesthesia. anterior rectus femoris muscle and its ligament were removed from rat hind limb. Morphological changes of them were peformed by the observation of light and electron microscopes. In the light microscopic findings, the muscle cells were polyheadral and situated with each other without small gap in control group. nucleus of cell was seen along the cell margin, and muscle cell groups were divided by regular narrow gap in cross section. In the pain-induced group, muscle cell groups were divided each other by the irregular gap, and some of groups formed larger than other cell groups by the fusion. Intercellular gap of most cell groups were increased compared with control groups. And also, perimysium of muscle cell groups was swollen in cross section. In control group, muscle cells contacted each other closely and each cell was divided by perimysium. The intracellular gaps were not seen between myofibrills, and also striations were well defined between muscle cells in longitudinal section. In pain-induced group, muscle cells were divided by the small intracellular gaps. And also, muscle cell showed many a short cross or longitudinal intercellular gaps in longitudinal section. In light microscopic findings of control group, tendon was composed with many tendon fibers contacted each other closely without gap. The free margin of tendon was fused, and apso the tendon fibers did not invaded between muscles. In pain-induced group, tendon was divided small groups by intertendinous gap, and also the margin of tendon divided by small groups. In the free margin, tendon invaded into muscle cells, and also fibroblasts between tendon fibers were long and lance-shaped. From these results, it is suggested that pain induction by carrageenan injured rat skeletal muscle and ligament by the morphological changes.

• Computers and Concrete
• /
• 제15권6호
• /
• pp.865-878
• /
• 2015

In order to construct a multiscale model for the compressive strength of plain concrete columns with circular cross section subjected to central longitudinal compressive load, a column failure mechanism is proposed based on the theory of internal instability. Based on an energy analysis, the multiscale model is developed to describe the failure process and predict the column's compressive strength. Comparisons of the predicted results with experimental data show that the proposed multiscale model can accurately represent both the compressive strength of the concrete columns with circular cross section, and the effect of column size on its strength.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권5호
• /
• pp.1037-1049
• /
• 2001

Considerable interest has evolved in the flow of non-Newtonian fluids in channels of noncircular cross section in compact heat exchanges. Analytical solution was developed for prediction of the flow rate and maximum velocity in steady laminar flow of any incompressible, time-independent non-Newtonian fluids in straight closed and open channels of arbitrary, but axially unchanging cross section. The geometric parameters and function of shear describing the behavior of the fluid model were evaluated for fluid flow among a bundle of rods arranged in triangular and square array. Numerical values of dimensionless maximum velocities, mean velocities, pressure-drop-flow parameters and friction factors were evaluated as a function of porosity and pitch-to-radius ratio.

• Computers and Concrete
• /
• 제10권2호
• /
• pp.149-171
• /
• 2012

The problem of a concrete cross section under flexural and axial loading is indeterminate due to the existence of more unknowns than equations. Among the infinite solutions, it is possible to find the optimum, which is that of minimum reinforcement that satisfies certain design constraints (section ductility, minimum reinforcement area, etc.). This article proposes the automation of the optimum reinforcement calculation under any combination of flexural and axial loading. The procedure has been implemented in a program code that is attached in the Appendix. Conventional-strength or high-strength concrete may be chosen, minimum reinforcement area may be considered (it being possible to choose between the standards ACI 318 or Eurocode 2), and the neutral axis depth may be constrained in order to guarantee a certain sectional ductility. Some numerical examples are presented, drawing comparisons between the results obtained by ACI 318, EC 2 and the conventional method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.130-135
• /
• 1997

A kinematically admissible velocity field is developed for the analysis of twisting of extruded products. The twisting of extruded product is caused by the linearly increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance and is increased linearly by longitudinal distance from die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product changes with the aspect ratio of product and increases with the decreases in die length and in eccentricity of gravity center of the cross-section of workpiece at die entrance from that of the cross-section at the die exit.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.45-48
• /
• 1997

The kinematically admissible velocity field is developed for the eccentric extrusion of circular shaped products. The curving of product in extrusion is caused by the difference of the linearly distributed longitudinal velocity on the cross-section of the workpiece at the dies exit. The results of the eccentric extrusion by upper bound analysis show that the curvature of product increases with the increase in eccentricity of gravity center of the cross-section of workpiece at dies entrance from that of the corss-section at the dies exit end. By the DEFORMTM-3D analysis, the curving of circular shaped product in extrusion is changed by the eccentricity, die land length and the die length. The result of the analysis by DEFORMTM-3D software shows that the curvature of circular shaped product increases with the eccentricity. The two analysis and one experiment show the curving phenomenon in eccentric extrusion process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.49-52
• /
• 1997

The kinematically admissible velocity field is developed for the analysis of the curving of an eccentric extrusion. The curving of product in extrusion is caused by the difference of the linearly distributed longitudinal velocity on the cross-section of the workpiece at the dies exit. The result of the analysis show that the curvature of product increases with the increase in eccentricity of gravity center of the cross-section of the workpiece at the die entrance from that of the cross-section at the die exit. It also increase with the die land dimension. By the DEFORMTM-3D analysis, the curving of T-shaped product in extrusion is changed by the eccentricity, die land length and the friction constant. The result of the analysis by DEFORMTM-3D software shows that the curvature of circular shaped product increases with the eccentricity. The two analysis and one experiment show the curving phenomenon in eccentric extrusion process.

• 대한조선학회논문집
• /
• 제33권1호
• /
• pp.135-144
• /
• 1996

본 논문에서는 범용 전문가 시스템 쉘을 이용하여 구조설계, 특히 선박의 중앙 횡단면 구조설계를 지원할 수 있는 전문가 시스템(ESMID)을 개발하였다. 기존의 전문가 시스템과는 달리 여기서는 효율적인 설계 전문가시스템을 구현하기 위하여 지식베이스와 공학 데이타베이스, 사용자 인터페이스, 그리고 공학 계산 프로그램들이 통합된 시스템을 구현하였다. 본 시스템의 유효성을 검증하기 위하여 64K 살물선에 적용하여 구조설계를 수행하였다. 기존의 전문가시스템에 데이타베이스, 그래픽 사용자 인터페이스 등의 환경들이 접목됨으로써 초보자도 쉽게 구조설계를 수행할 수 있게 된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.241-248
• /
• 2001

The ductility of circular hollow reinforced concrete columns with one layer of longitudinal and spiral reinforcement placed near the outside face of the section and the steel tube placed on the inside face of the section is investigated. Such hollow sections are confined through the wall thickness since the steel tube is placed. The results of analytical moment-curvature analyses for such hollow sections are compared with those for the circular section with the sane diameter. In this study, moment-curvature analyses are conducted with Mandel's confined concrete stress-strain relationship in which the effect of confinement is to increase the compression strength and ultimate strain of concrete. The moment-curvature analyses confirmed that the ductility is primarily influenced on the ultimate strain. The variables influenced on the ultimate strain is the ratio and yield strength of confining reinforcement and the compression strength for confined concrete. From this ultimate strain - the transverse reinforcement ratio relationship, the transverse reinforcement ratio for circular hollow reinforced columns with confinement is proposed. The proposed transverse reinforcement ratio is confirmed by experimental results.

• Coupled systems mechanics
• /
• 제12권1호
• /
• pp.69-81
• /
• 2023

This paper considers a delamination analysis of a statically undetermined inhomogeneous beam structure of rectangular section with viscoelastic behavior under torsion. The beam is built in at its two ends. The beam has two longitudinal inhomogeneous layers with a delamination crack between them. A notch is made in the upper crack arm. The external torsion moment applied on the beam is a function of time. Under these conditions, the beam has one degree of indeterminacy. In order to derive the strain energy release rate, first, the static indeterminacy is resolved. Then the strain energy release rate is obtained by analyzing the balance of the energy with considering the viscoelastic behavior. The strain energy release rate is found also by analyzing the compliance of the beam for checkup. Solution of the strain energy release rate in a beam without a notch in the upper crack arm is derived too. In this case, the beam has two degrees of static indeterminacy (the torsion moment in the upper crack arm is treated as an additional internal redundant unknown). A parametric investigation of the strain energy release rate is carried-out.