• 한국항공우주학회지
• /
• 제33권10호
• /
• pp.104-110
• /
• 2005

본 논문에서는 보다 빠른 속도의 무인주행과 이를 가능케하는 안전한 항법구현에 주력하여 시스템을 개발하고 알고리즘을 적용한 결과를 보이고 있다. 또한 본 논문에서는 9개의 초음파 센서를 사용하여 가상역장 알고리즘을 적용한 험로주행용 차량의 무인주행에 적용한 시스템의 구성과 적용방법을 기술하고 실차실험을 통한 시스템의 성능과 향후 연구방향을 제시하였다.

• 자동차안전학회지
• /
• 제14권2호
• /
• pp.57-69
• /
• 2022

Recently, as interest in self-driving cars has increased worldwide, research and development on the Advanced Driver Assist System is actively underway. Among them, the purpose of Adaptive Cruise Control (ACC) is to minimize the driver's driving fatigue through the control of the vehicle's longitudinal speed and relative distance. In this study, for the research of the ACC test in the real environment, the real-road test was conducted based on domestic-road test scenario proposed in preceding study, considering ISO 15622 test method. In this case, the distance measurement method using the dual camera was verified by comparing and analyzing the result of using the dual camera and the result of using the measurement equipment. As a result of the comparison, two results could be derived. First, the relative distance after stabilizing the ACC was compared. As a result of the comparison, it was found that the minimum error rate was 0.251% in the first test of scenario 8 and the maximum error rate was 4.202% in the third test of scenario 9. Second, the result of the same time was compared. As a result of the comparison, it was found that the minimum error rate was 0.000% in the second test of scenario 10 and the maximum error rate was 9.945% in the second test of scenario 1. However, the average error rate for all scenarios was within 3%. It was determined that the representative cause of the maximum error occurred in the dual camera installed in the test vehicle. There were problems such as shaking caused by road surface vibration and air resistance during driving, changes in ambient brightness, and the process of focusing the video. Accordingly, it was determined that the result of calculating the distance to the preceding vehicle in the image where the problem occurred was incorrect. In the development stage of ADAS such as ACC, it is judged that only dual cameras can reduce the cost burden according to the above derivation of test results.

• 한국자동차공학회논문집
• /
• 제23권6호
• /
• pp.633-641
• /
• 2015

The ROM (roll over mitigation) system is a next-generation suspension system that can improve vehicle-driving stability and ride comfort. Currently, mass-produced safety systems, such as ESC (electronic stability control) and ECS (electronic control suspension), enable measurements of longitudinal and lateral acceleration as well as yaw rate through inertial sensor clusters, but they lack direct measurements of the roll angle. Therefore, in this paper, a roll angle estimation algorithm from ESC system sensors and tire normal force has been proposed. Furthermore, this study presents a method for roll over mitigation force distribution between the front and rear of a ROM system. Performance and reliability of the roll angle estimation and roll over mitigation force distribution were investigated through simulations. The simulation results showed that the proposed control algorithm and strategy are reliable during vehicle rollovers.

• 해양환경안전학회지
• /
• 제27권2호
• /
• pp.211-218
• /
• 2021

본 연구는 종방향과 횡방향에서 규칙파가 외란으로 입사하는 선박의 종동요 및 횡동요를 억제하는 문제를 다룬다. 선박의 안전 운항을 위해서 파랑 중 선박의 종동요 및 횡동요를 안정화시키는 것은 필수적인 과제로 여겨진다. 종동요 및 횡동요 거동에서 중요한 특징 중에 하나는 공진인데, 이 현상은 특정한 조건에서 예상치 못한 큰 응답을 초래한다. 종동요와 횡동요는 두 운동이 상호 결합되어 있고 복원항이 강한 비선형을 갖고 있음으로 계의 파라미터에 따라 다양한 동적 거동을 보이는 것이 중요한 특징인데, 특히 종동요에서 이 특성이 두드러지게 나타난다. 무엇보다, 선박의 조종성능 및 안전을 위해 선박의 종동요 가속도 응답을 완전히 억제하는 것은 상당히 도전적인 과제이다. 이 연구에서는 준 슬라이딩 모드 제어 기법을 이용하여 종동요와 횡동요를 줄임으로 파랑 중의 선박을 안정적인 직립 상태로 유지시키고, 아울러 채터링을 감소시키는 목적을 달성하였다. 리아프노프 이론으로 준 슬라이딩 모드 제어의 안정성을 판명하였고, 수치 시뮬레이션으로 제어 방식의 유효성을 증명하였다. 제시한 기법으로 종동요 및 횡동요 응답의 수렴 및 채터링 감소라는 두 가지 목표가 효과적으로 달성되었다.

• 자동차안전학회지
• /
• 제9권4호
• /
• pp.38-47
• /
• 2017

With automobiles sharply increasing worldwide, we are faced with serious social problems such as traffic accidents, traffic jams, environmental pollution, and economic inefficiency. In response, research on ITS is promoted mainly by regions with advanced automotive industry such as the US, Europe, and Japan. While Korea is working to get ahead to take global market through developing and turning into global standards systems related to ASV(Advanced Safety Vehicle), the country is not excellently prepared for such projects. The purpose of ACC is to control the vehicle's longitudinal speed and distance and minimize driver workload. Such a system should be useful in preventing accidents, as it reduces driver workload in the 21st-century world of telematics created by the development of automobile culture industry. In this light, the thesis presents a method to test and evaluate ACC system and a mathematical method to assess distance. Furthermore, for the proposed test and evaluation, theoretical values are tested with vehicle test and a database is acquired, by using vehicles equipped with an ACC system. We proposed the scenarios suitable for the domestic environment and conducted the actual road test. Theoretical evaluation criteria for developing ACC system may be employed and scenario-specific evaluation methods may find their useful application through testing the formula proposed by comparing the database and the mathematical method. and, many companies are expected to utilize the scenario in the developing stage of ACC, and be able to employ as a verification method by harnessing theoretical formula before a road test.

• 한국항공우주학회지
• /
• 제33권10호
• /
• pp.60-67
• /
• 2005

현대의 고성능 전투기는 한계받음각 내에서 적절한 조종성(Controllability) 및 안정성(Stability)을 확보하고 있어야 한다. 고받음각에서 항공기가 이탈에 진입할 수 있는 한계값은 항공기 형상설계에 직결되는 문제이다. 하지만 현대의 고성능 전투기는 전기식 비행제어계통(Digital Fly-By-Wire Flight Control System)을 사용하여 고받음각 제어법칙을 설계함으로써 한계값 내에서 항공기의 안정성을 보장하고 있다. 현재, T-50 세로축 고받음각 제어법칙에는 (+)한계받음각 이상으로의 비행을 제한하는 받음각 제한기(Angle of Attack Limiter)가 설계되어 있다. 그러나 (-)한계받음각 이상으로 비행을 제한하는 받음각 제한기는 설계되어 있지 않아, 조종사의 과도한 (-)세로축 기동에 대해 항공기가 이탈에 진입할 수 있다. 그리고 T-50 비행시험에서 PA에서 과도한 (+)세로축 기동 시, 받음각(Angle of Attack)이 현재 설계되어 있는 한계받음각을 초과하는 문제점이 발생하였다. 본 논문에서는 고받음각 제어법칙을 일부 수정하여 한계받음각 내에서 항공기의 세로축 조종성능을 향상시키고, 항공기 안정성을 확보할 수 있는 제어법칙에 관한 연구를 수행하였다.

• 한국자동차공학회논문집
• /
• 제24권3호
• /
• pp.310-318
• /
• 2016

The demands for vehicle safety systems such as ABS and ESC have been increased. Accurate vehicle state estimation is required to realized the abovementioned systems and tire-friction coefficient is crucial information. Estimation of lateral tire-road friction coefficient using pneumatic trail information is mainly dealt in this paper. Pneumatic trail shows unique characteristics according to the wheel side slip angle and these property is highly sensitive to vehicle lateral motion. The proposed algorithm minimizes the use of conventional tire models such as magic formula, brushed tire model and Dugoff tire model. The pure side slip maneuver, which means no longitudinal dynamics, is assumed to achieve the ultimate goal of this paper. A simulation verification using Carsim and Simulink is performed and the results show the feasibility of the proposed algorithms.

• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.29-37
• /
• 2008

Vehicle stability is a very important subject in vehicle design and control, because vehicle safety is closely dependent upon its dynamic stability. For the vehicle stability analysis, the nonlinear vehicle model of a mid-size car with three DOF - longitudinal, lateral and yaw - is employed. A rigorous method is used to determine the vehicle stability region in plane motion. An algorithm is used to materialize a topology theorem, which enables to find the exact stability region. A stability criterion for the critical cornering is proposed.

• 한국산업융합학회 논문집
• /
• 제22권5호
• /
• pp.575-582
• /
• 2019

Advanced driving assist system can support safety of driver and passengers which may require vehicle dynamics states as well as road geometry. It is essential to have in real-time estimation of related variables and parameters. Among the road geometry parameters, road slope angle which can not be measured is essential parameter in pose estimation, adaptive cruise control and others on sag road. In this paper, Kalman filter based method for the estimation of the vehicle dynamics and road slope angle using a nonlinear vehicle model is proposed. It uses a combination of Kalman filter as Cascade Extended Kalman Filter. CEKF uses measured vehicle states such as yaw rate, longitudinal/lateral acceleration and velocity. Unknown vehicle parameters such as center of gravity and inertia are obtained by 2 D.O.F lateral model and experimentally. Simulation and Experimental tests conducted with commercialized vehicle dynamics model and real-car.

• 수산경영론집
• /
• 제50권2호
• /
• pp.23-40
• /
• 2019

The main purpose of this study is to analyze and examine the problems of the law systems of the safety and maintenance of nuclear facilities and to propose the improvements with respect to the related problems especialy focused on safety management of aquatic products. Therefore, the results of the paper would be helpful to build an effective management law system of safety and maintenance of nuclear facilities and fisheries products. The research methods are longitudinal and horizontal studies. This study compares domestic policies with foreign policies of nuclear plants and aquatic products. Using the above methods, examining the current system of nuclear-related laws and regulations, we have found that there exist 13 Acts including "Nuclear Safety Act", etc. Safety laws related on nuclear facilities have seven Acts including "Nuclear Safety Act", "the Act on Physical Protection and Radiological Emergency", "Radioactive waste control Act", "Act on Protective Action Guidelines against Radiation in the Natural Environment", "Special Act on Assistance to the locations of facilities for disposal low and intermediate level radioactive waste", "Korea Institute of Nuclear Safety Act". "Act on Establishment and Operation of the Nuclear Safety and Security Commission". The seven laws are composed of 119 legislations. They have 112 lower statute of eight Presidential Decrees, six Primeministrial Decrees and Ministrial Decrees, 92 administrative rules (orders), 6 legislations of local self-government aself-governing body. The concluded proposals of this paper are as follows. Firstly, we propose that the relationship between the special law and general law should be re-established. Secondly, the terms with respect to law system of safety and maintenance of nuclear plants should be redefined and specified. Thirdly, it is advisable to re-examine and re-establish the Law System for Safety and Maintenance of Nuclear Facilities. and environmental rights like the French Nuclear Safety Legislation. Lastly, inadequate legislation on the aquatic pollution damage should be re-established. It is necessary to ensure sufficient transparency as well as environmental considerations in the policy decisions of the Korean government and legislation of the National Assembly. It is necessary to further study the possibilities of accepting the implications of the French legal system as a legal system in Korea. In conclusion, the safety management of nuclear facilities is not only focused on the secondary industry and the tertiary industry centering on power generation and supply, but also on the primary industry, which is the food of the people. It is necessary to prevent damage to be foreseen. Therefore, it is judged that there should be no harm to the people caused by contaminated marine products even if the "Food Safety Law for Prevention of Radiation Pollution Damage" is enacted.