• Ocean Systems Engineering
• /
• 제1권4호
• /
• pp.355-372
• /
• 2011

Based on the fully nonlinear velocity potential theory, the liquid sloshing in a three dimensional tank under random excitation is studied. The governing Laplace equation with fully nonlinear boundary conditions on the moving free surface is solved using the indirect desingularized boundary integral equation method (DBIEM). The fourth-order predictor-corrector Adams-Bashforth-Moulton scheme (ABM4) and mixed Eulerian-Lagrangian (MEL) method are used for the time-stepping integration of the free surface boundary conditions. A smoothing scheme, B-spline curve, is applied to both the longitudinal and transverse directions of the tank to eliminate the possible saw-tooth instabilities. When the tank is undergoing one dimensional regular motion of small amplitude, the calculated results are found to be in very good agreement with linear analytical solution. In the simulation, the normal standing waves, travelling waves and bores are observed. The extensive calculation has been made for the tank undergoing specified random oscillation. The nonlinear effect of random sloshing wave is studied and the effect of peak frequency used for the generation of random oscillation is investigated. It is found that, even as the peak value of spectrum for oscillation becomes smaller, the maximum wave elevation on the side wall becomes bigger when the peak frequency is closer to the natural frequency.

• 한국해양공학회지
• /
• 제27권1호
• /
• pp.93-101
• /
• 2013

The incident bore impact loads acting on a tall structure is simulated using the refined Moving Particle Simulation (MPS) method. The particle method is more feasible and effective than conventional grid-based methods for the violent free-surface problems. In the present study, the simulation results for the temporal change of the hydrodynamic force on the structure and longitudinal velocity component around the structure are compared with the experiments (Radd and Bidoae, 2005). And the mitigation effects by installation of various obstacles in front of the main structure are investigated and discussed form the simulation results.

• Journal of the Korean Wood Science and Technology
• /
• 제28권2호
• /
• pp.19-24
• /
• 2000

본 논문에서는 목재시편의 횡단연적과 수분경사가 라디에타파인 심재와 번재의 초음파 전달속도에 미치는 효과를 조사하였다. 각 수분경사 모델시편은 함수율이 다른 다섯 개의 소편을 배합하여 만들었다. 횡단면적이 작아질수록 초음파 전달속도는 심재와 변재 모두 4~8% 감소하였다. 수분경사 모델시편을 투과한 초음파 신호를 분석한 결과, 횡단면적이 클수록 저주파 신호가 고주파 신호보다 분명한 주류률 이루었다. 평균 함수율이 같더라도 수분경사가 다르면 시편의 초음파 전달속도는 다르게 나타났다. 초음파 전달속도와 수분경사 모델시편의 내층 평균 함수율의 분포는 함수율에 따라 세 가지 서로 다른 형태를 나타냄이 밝혀졌다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2011년도 한국우주과학회보 제20권1호
• /
• pp.29.3-29.3
• /
• 2011

The turbulence in the nonlinear regime of the electromagnetic ion-cyclotron (EMIC) instability are investigated via a particle-in-cell (PIC) simulation. EMIC instability arises from anisotropic ion temperature and excites the Alfven ion-cyclotron (AIC) waves. The excited AIC waves undergo inverse-cascade via the nonlinear wave interaction of two AIC and one ion density modes. Induced ion density modes are the normal and second harmonic ion-acoustic (IA) waves. They have the same group velocity, but the second harmonic IA mode only generates the longitudinal electric field.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2002년도 추계학술대회 논문집
• /
• pp.109-112
• /
• 2002

The supersonic jet discharging from a petal nozzle is known to enhance mixing effect with the surrounding gas because it produces strong longitudinal vortices due to the velocity difference from both the major and minor axes of petal nozzle. In the present study, the supersonic free jet discharging from the petal nozzle is investigated experimentally. The nozzles used are 4, 6, and 8 lobed petal nozzles with a design Mach number of 1.7, and the flow fields are compared with a circular nozzle with the same design Mach number. The pitot impact pressures are measured using a fine pilot probe. The flow fields are visualized using a Schlieren optical method. The results show that the petal nozzle has more increased supersonic length compared with the circular jet.

• 대한기계학회논문집A
• /
• 제38권10호
• /
• pp.1125-1131
• /
• 2014

복합 구조물의 충격 진동 특성을 이용한 취약성 분석 기법을 제안하였다. 프레임 요소로 구성된 구조물의 충격 거동을 파악하기 위해서 스펙트럴요소법을 적용하였다. 티모센코 보함수를 이용해 고속충돌에 의한 고주파 성분을 포함하는 충격파 전파 특성을 시뮬레이션하였다. 구조물의 결합부분에서는 종방향과 횡방향 파동의 상호 작용을 고려한 파동 전달을 해석하였다. 충격력이 구조물에 작용할 경우 주파수 및 시간 응답을 얻고 전체 구조물에서 충격에너지 전파 특성을 파악하였다. 구조물의 위치별로 계산된 최대가속도 크기와 시스템을 구성하는 주요 부품의 허용 가속도 기준에 의한 취약확률 함수를 정의하고 시스템의 취약 확률을 계산하였다. 제안된 취약성 분석 절차를 이용해 3 차원 전투 차량의 충격 응답을 얻고 충격에 취약한 구조물 위치를 파악하였다.

• Coupled systems mechanics
• /
• 제12권1호
• /
• pp.41-68
• /
• 2023

The present work is concerned with the study of the influence of inhomogeneous initial stresses in a hollow cylinder containing a compressible inviscid fluid on the propagation of axisymmetric longitudinal waves propagating in this cylinder. The study is carried out using the so-called three-dimensional linearized theory of elastic waves in bodies with initial stresses to describe the motion of the cylinder and using the linearized Euler equations to describe the flow of the compressible inviscid fluid. It is assumed that the inhomogeneous initial stresses in the cylinder are caused by the internal pressure of the fluid. To solve the corresponding eigenvalue problem, the discrete-analytic solution method is applied and the corresponding dispersion equation is obtained, which is solved numerically, after which the corresponding dispersion curves are constructed and analyzed. To obtain these dispersion curves, parameters characterizing the magnitude of the internal pressure, the ratio of the sound velocities in the cylinder material and in the fluid, and the ratio of the material densities of the fluid and the cylinder are introduced. Based on these parameters, the influence of the inhomogeneous initial stresses in the cylinder on the dispersion of the above-mentioned waves in the considered hydro-elastic system is investigated. Moreover, based on these results, appropriate conclusions about this influence are drawn. In particular, it is found that the character of the influence depends on the wavelength. Accordingly, the inhomogeneous initial stresses before (after) a certain value of the wavelength lead to a decrease (increase) of the wave propagation velocity in the zeroth and first modes.

• 한국생산제조학회지
• /
• 제23권1호
• /
• pp.48-55
• /
• 2014

Many techniques are available for destructive and nondestructive measurement of mechanical hardness. The ultrasonic method could be widely applicable as a nondestructive technique. Many studies have examined how changes in the mechanical hardness affect the longitudinal velocity of ultrasonic waves. This approach aims to estimate the overall velocity variations in specimens. However, proper nondestructive examination techniques are needed as effective tools for analyzing the effects of heat treatment on the surface of the specimens. Therefore, in this study, the effect on the hardness of piston rods was nondestructively measured using surface ultrasonic waves. The hardness after heat treatment was investigated at various depths in the specimens, and the velocity of the surface ultrasonic waves was measured with respect to the hardness of the piston rods. In addition, finite element method simulations were performed to confirm the behavior of the waves.

• 한국터널지하공간학회 논문집
• /
• 제9권1호
• /
• pp.75-82
• /
• 2007

본 연구의 목적은 록볼트의 건전도를 평가하기 위하여 록볼트의 비파괴시험을 기술하고 비파괴시험의 적용성을 조사하는 것이다. 록볼트 자체와 그라우팅재를 포함한 록볼트의 건전도를 평가하기 위하여, 수치해석 및 실험적 방법을 이용한 두 가지 방법이 적용되었다. 수치해석적 방법에서는 "DISPERSE" 프로그램을 이용하여 록볼트 시스템에서 유도파 전달시의 분산성분석을 수행하였다. 분산선도 곡선은 지중근입되어 있는 록볼트에 대하여 주변암반과 그라우팅재의 강성에 따라 신호파의 진폭감쇠정도와 주파수변화대비 전파속도의 영향을 보여준다. 이로 부터 록볼트의 건전도시험을 위한 최적의 주파수를 추정할 수 있으며, 그 결과L(1)모드에서$20{\sim}70kHz$가 최적의 주파수대역으로 선정하였다. 실험적 방법에서는 시험체를 제작한 후 현장조건을 모사하여 실내비파괴시험을 실시하였다. 비파괴 실험기법으로는 록볼트 선단부에 가진 센서를 부착, 매입하여 전기신호 가진에 의한 투과법을 적용하였다. 그라우팅과 주변암반에 의해 신호파의 전파속도와 진폭에 영향이 있으며, 그라우팅과 주변암반으로의 leaking 등에 의하여 신호파의 진폭이 감쇠하는 것으로 나타났다. 또한 시험체가 그라우팅으로 피복되어 있을 경우 자유구속 및 지중근입 조건에서 공동결함 크기가 증가함에 따라 무결함부에 비하여 진폭이 증가하였다. 그리고 수진된 신호파의 초동시간이 감소하여 전파속도는 전반적으로 선형적 증가 경향을 보였으며, 진폭변화에 비하여 전파속도가 공동결함비율 변화에 더 민감한 반응을 보였다. 본 연구는 록볼트의 건전도 평가시에 비파괴시험이 매우 유용한 방법임을 확인할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.853-858
• /
• 2001

The knowledge of flame structure is essential for control of combustion instability phenomena. Some results of an experimental study on mechanism of naturally occurring combustion oscillations with a single dominant frequency are presented. Tests were conducted in a laboratory-scale dump combustor at atmospheric pressure. Sound level meter was used to track the pressure wave inside the combustor. The observed instability was a longitudinal mode with a frequency of $\sim341.8Hz$. Instability map was obtained at the condition of inlet temperature of $360^{\circ}C$, mean velocities of $8.5\sim10.8m/s$ and well premixed mixture. It showed that combustion instability was susceptible to occur in the lean conditions. In this study, unstable flame was observed from stoichiometric to 0.7 in overall equivalence ratio. At selected unstable conditions, phase-resolved OH chemiluminescence images were captured to investigate flame structure with various mean velocities. As mean velocity is increased, the flame grows and global heat release was changed. Due to these effects, combustion instability can be maintained at more lean air-fuel ratio. Also, these results give an insight to the controlling mechanism for an increasing heat release at maximum pressure.