• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.769-774
• /
• 2004

In this paper, the main factors affect on the longitudinal rail force are discussed. Considering rail-bridge interaction, analytical and experimental evaluation of track behavior has been achieved. It is concluded that the horizontal ballast strength, the expansion length of the bridge span, and the stiffness of the bridge sub-structure are the significant parameters affecting the stability of the continuous welded rail (CWR) track. And, it is suggested that the ballast resistance forces should be maintained to ensure the track stability during the service.

• 콘크리트학회지
• /
• 제10권5호
• /
• pp.159-165
• /
• 1998

중트럭 통행으로 인한 철근콘크리트 교량바닥판의 열화는 교량구조물을 유지보수하는데 있어 심각한 문제 중 하나이며, 프리캐스트 바닥판을 이용한 교량바닥판의 시공 및 교체 방법이 실용적이며 효과적인 방법으로 인식되고 있다. 본 연구에서는 횡방향 ddusruf부에 종방향 프리스트레싱을 도입한 프리캐스트 바닥판의 모델을 제작하여 바닥판간 횡방향 연결부의 강성 평가 및 연결부의 피로 거동을 파악하기 위해서 피로실험을 수행하여 피로하중하에서의 휨강성의 변화, 균열발생 및 파괴하중 등을 측정하였다. 실험결과를 통해서 피로하중하에서 프리스트레스 프리캐스트 부재의 프리스트레스 효과를 평가하였으며, 현장타설에 의해서 시공되는 일반 RC 부재에 비해서 우수한 구조적 거동을 보여주는 적정량의 종방향 프리스트레스 크기를 결정하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.379-382
• /
• 2005

Composite behavior between FRP-concrete composite deck and girder is investigated by numerical analysis and parametric experiments. Compared to reinforced concrete deck, the weight of FRP-concrete composite deck is about 64$\%$ but the performance of composition is 90$\%$. Therefore the FRP-concrete composite deck has the advantage of longitudinal section stiffness increase in case of composition to the girder. The experiment, according to the variation of stud diameter, stud length and bedding thickness, is carried out. As a result, the static failure strength increases as stud diameter and length increase and bedding thickness decreases.

• Structural Engineering and Mechanics
• /
• 제15권4호
• /
• pp.437-449
• /
• 2003

The aim of this study is to develop an analytical model of a beam with open cracks and external strengthening which is able to predict its modal scheme components (natural frequencies and mode shapes). The model is valid as far as the excitation level is low enough not to activate non linear effects. The application field of the model are either the prediction of the efficiency of the reinforcement or the non destructive assessment of the structural properties. The degrees of freedom associated to the fault lips must be taken into account in order to introduce the effect of the external strengthening. In a first step, an analytical formulation of a beam with thin notches is proposed according to the references. The model is then extended to incorporate the strengthening consisting in a longitudinal stiffness applied in the vicinity of the cracks. In a second step, the analytical results are compared with these obtained from a finite element simulation.

• 대한족부족관절학회지
• /
• 제18권3호
• /
• pp.93-99
• /
• 2014

Acquired adult flatfoot deformity is characterized by flattening of the medial longitudinal arch and dysfunction of the posteromedial soft tissues, including the posterior tibial tendon. When the non-operative treatment fails to result in improvement of symptoms, surgery should be considered. Operative techniques include flexor digitorum longus tendon transfer, calcaneal medial slide osteotomy, lateral column lengthening, and arthrodesis of the hindfoot. The principle of correcting the deformity while avoiding overcorrection and excessive stiffness is important in achievement of good outcomes in these patients.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권1호
• /
• pp.16-20
• /
• 2006

The proposed paper presents an integrated linear actuator which combines Transverse Flux Linear Motor(TFLM) for Household elelctric applications. They both use the same primary magnetic circuit, but they have different secondary movers. The paper presents a new design of linear motor for a new electromagnetic linear actuator, an tintegrated TFLM. The calculated tthrust force is good agreement with experiments. We have studied a transient response of a linear actuator with a damping ratio, spring constant and specially a pressed power patterns for a constant stroke control.

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.109-116
• /
• 2004

This paper investigates the characteristics of deflection for circular plate that has same supporting boundary condition along the width direction of plate according to the length change of supporting end. For two boundary conditions such as simple supporting and clamping on both ends, this study derives maximum deflection formula of circular plate using differential equation of elastic curve, assuming that a circular plate is a beam with different widths along the longitudinal direction. The deflection formula of circular plate is verified by carrying out finite element analysis with regard to the ratio of length of supporting end to radius of circular plate.

• International Journal of Railway
• /
• 제2권4호
• /
• pp.152-163
• /
• 2009

In this paper, the correlation between the accelerations measured at the track components and the parameters affecting the acceleration is analyzed. To do it, the accelerations of each track component such as rails, sleepers and ballast are measured in Kyong-Bu high-speed Line. The RMS values of the measured accelerations are calculated and the pad stiffness, the longitudinal irregularity, running velocity and the corrugation, are considered as the parameters affecting the acceleration. By using the linear regression, the correlation coefficients are calculated to analyze the relationship between the acceleration characteristics and the parameters. Also, the 1/3 Octave analysis is calculated to analyze the dominant frequency band of the accelerations of the track components.

• Geomechanics and Engineering
• /
• 제16권6호
• /
• pp.609-618
• /
• 2018

A new mechanical model for predicting the vibration of a pipe pile embedded in longitudinally layered visco-elastic media with radial inhomogeneity is proposed by extending Novak's plain-strain model and complex stiffness method to consider viscous-type damping. The analytical solutions for the dynamic impedance, the velocity admittance and the reflected signal of wave velocity at the pile head are also derived and subsequently verified by comparison with existing solutions. An extensive parametric analysis is further performed to examine the effects of shear modulus, viscous damping coefficient, coefficient of disturbance degree, weakening or strengthening range of surrounding soil and longitudinal soft or hard interbedded layer on the velocity admittance and the reflected signal of wave velocity at the pile head. It is demonstrated that the proposed model and the obtained solutions provide extensive possibilities for practical application compared with previous related studies.

• 해양환경안전학회지
• /
• 제22권6호
• /
• pp.615-624
• /
• 2016

본 연구는 해상에서 근접하여 계류된 직사각형 박스 형상의 두 바지선을 대상으로 유체역학적 상호작용으로 인한 선체운동 응답특성을 분석하기 위하여 수치시뮬레이션을 실시하였다. 이 수치시뮬레이션 실험에서는 DNV-GL의 SESAM 수치해석솔루션을 사용하여 결합된 강성 메트릭스항(coupled stiffness matrix terms)을 다중물체 모드(multiple body modes)의 surge 방향에 추가하였고, 실험에 적용한 바지선 모델의 1차 방사 및 산란 영향을 계산하기 위하여 퍼텐셜 이론을 적용하였다. 실험 결과, 두 바지선의 횡간격 20 m, 횡파 실험조건 경우에 1.3 rad/s에서 실험선의 피난효과(sheltering effect)가 나타나지 않았다. 실험 모델 상호간 횡간격의 영향은 종파와 천수역 실험 조건에서 분명하게 나타났지만, sway force는 횡파일 경우에 두 실험 모델선과의 접근거리 간격에 영향을 받았다. 실험모델의 횡간격이 좁아지면 종파와 사파의 경우에 sway, heave 운동과 sway force의 피크는 높은 주파수대로 이동하였다. 수심이 10 m일 때 풍하측 바지선의 sway 운동은 횡파와 사파의 경우에 0.2-0.8 rad/s 주파수대에서 큰 차이를 보였으며, 입사파의 방향이 달라져도 sway force의 피크는 보다 낮은 주파수대에서 나타났다.