• Journal of the Korean Geotechnical Society
• /
• v.35 no.11
• /
• pp.75-95
• /
• 2019

The numerical analysis on PHC piles socketed into weathered rocks through sandy soil layers was conducted to propose the table solution or the chart solution to obtain the mobilization capacity. The mobilization capacity was determined at the settlement of 5% pile diameter and applied a safety factor of 3.0. In order to utilize the excellent compressive strength of the PHC pile effectively, it is recommended that the allowable bearing capacity of ground would be designed to be more than the long-term allowable compressive pile load. A procedure for determining an allowable pile capacity for PHC piles socketed into weathered rocks through sandy soil layers is given by the sum of the allowable skin friction of the sandy soil layer and the weathered rock layer and the allowable end bearing capacity of the weathered rock layer. The design efficiency of the PHC pile is about 85% at the reasonable design stage in the verification of the newly proposed method. Thus, long-term allowable compressive load (P_all) level of PHC piles can be utilized in the optimal design stage.

• Journal of Technology Innovation
• /
• v.24 no.4
• /
• pp.221-248
• /
• 2016

In this study, we conducted an in-depth literature review of the innovation characteristics of nuclear technology. We understood that the main issue may be a transition of fourth generation nuclear energy technology. We also analyzed a present status of Korean policy on nuclear energy technology and identified some implications for a successful settlement of the fourth generation nuclear energy technology. This study could provide some policy implications for maintaining the sustainable competitiveness of the fourth generation nuclear energy technology in Korea. According to our study, the factors that influence on a transition of nuclear energy technology are a policy-induced market for technical application and demonstration, stable and long-term resource allocation, constant interaction among stakeholders of innovation, accumulation of skill and know-how for an entire system. In addition, we conducted a case analysis on policy for Korean fourth generation nuclear energy technology. According to this case study, it would be necessary for Korea to pursue systematic training of human resources, active response to a social acceptance and reaction, establishment of specific plan for technical demonstration, long-term policy suggestion, and active promotion of constant interaction between stakeholders.

• Journal of Korean Library and Information Science Society
• /
• v.53 no.3
• /
• pp.95-117
• /
• 2022

This study was conducted as basic research for establishing a mid to long term development plan for libraries in Uiseong-gun, designated as a depopulated area. First, the social, cultural, and environmental characteristics of Uiseong-gun were analyzed and compared with the library infrastructure of depopulation areas similar in size with Uiseong-gun. In addition, a survey was conducted on the perception of users to understand the usage status of libraries, satisfaction with services and improvement plans, non-use factors, and demands for new libraries. Based on this process, the direction of Uiseong-gun library policy was presented. Specifically, four strategic directions for the development of libraries (future orientation, community revitalization, service specialization of the information poor, enhancement of local humanities and spiritual culture) and five key service tasks (building library brand, implementing innovative spaces and services, expanding library functions for improvement of settlement conditions of residents, developing and providing services for the elderly reflecting local characteristics, promoting reading culture) were derived. The proposed core tasks focused on future-oriented library services to overcome the limitations of a population decrease area and develop the potential of Uiseong-gun.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.4
• /
• pp.79-88
• /
• 2008

Recently, the high speed railway comes into the spotlight as the important and convenient traffic infrastructure. In Korea, Kyung-Bu high speed train service began in bout 400 km section in 2004, and the Ho-Nam high speed railway will be constructed by 2017. The high speed train will run with a design maximum speed of 300-350 km/hr. Since the trains are operated at high speed, the differential settlement of subgrade under the rail is able to cause a fatal disaster. Therefore, the differential settlement of the embankment must be controlled with the greatest care. Furthermore, the characteristics and causes of settlements which occurred under construction and post-construction should be investigated. A considerable number of studies have been conducted on the settlement of the natural ground over the past several decades. But little attention has been given to the compression settlement of the embankment. The long-term settlement of compacted fills embankments is greatly influenced by the post-construction wetting. This is called 'hydro collapse' or 'wetting collapse'. In spite of little study for this wetting collapse problem, it has been recognized that the compressibility of compacted sands, gravels and rockfills exhibit low compressibility at low pressures, but there can be significant compression at high pressures due to grain crushing (Marachi et al. 1969, Nobari and Duncan 1972, Noorany et al. 1994, Houston et al. 1993, Wu 2004). The characteristics of compression of fill materials depend on a number of factors such as soil/rock type, as-compacted moisture, density, stress level and wetting condition. Because of the complexity of these factors, it is not easy to predict quantitatively the amount of compression without extensive tests. Therefore, in this research I carried out the wetting collapse tests, focusing on various soil/rock type, stress levels, wetting condition more closely.

• International Journal of High-Rise Buildings
• /
• v.1 no.1
• /
• pp.37-51
• /
• 2012

New generation of tall and complex buildings systems are now introduced that are reflective of the latest development in materials, design, sustainability, construction, and IT technologies. While the complexity in design is being overcome by the availability and advances in structural analysis tools and readily advanced software, the design of these buildings are still reliant on minimum code requirements that yet to be validated in full scale. The involvement of the author in the design and construction planning of Burj Khalifa since its inception until its completion prompted the author to conceptually develop an extensive survey and real-time structural health monitoring program to validate all the fundamental assumptions mad for the design and construction planning of the tower. The Burj Khalifa Project is the tallest structure ever built by man; the tower is 828 meters tall and comprises of 162 floors above grade and 3 basement levels. Early integration of aerodynamic shaping and wind engineering played a major role in the architectural massing and design of this multi-use tower, where mitigating and taming the dynamic wind effects was one of the most important design criteria established at the onset of the project design. Understanding the structural and foundation system behaviors of the tower are the key fundamental drivers for the development and execution of a state-of-the-art survey and structural health monitoring (SHM) programs. Therefore, the focus of this paper is to discuss the execution of the survey and real-time structural health monitoring programs to confirm the structural behavioral response of the tower during construction stage and during its service life; the monitoring programs included 1) monitoring the tower's foundation system, 2) monitoring the foundation settlement, 3) measuring the strains of the tower vertical elements, 4) measuring the wall and column vertical shortening due to elastic, shrinkage and creep effects, 5) measuring the lateral displacement of the tower under its own gravity loads (including asymmetrical effects) resulting from immediate elastic and long term creep effects, 6) measuring the building lateral movements and dynamic characteristic in real time during construction, 7) measuring the building displacements, accelerations, dynamic characteristics, and structural behavior in real time under building permanent conditions, 8) and monitoring the Pinnacle dynamic behavior and fatigue characteristics. This extensive SHM program has resulted in extensive insight into the structural response of the tower, allowed control the construction process, allowed for the evaluation of the structural response in effective and immediate manner and it allowed for immediate correlation between the measured and the predicted behavior. The survey and SHM programs developed for Burj Khalifa will with no doubt pioneer the use of new survey techniques and the execution of new SHM program concepts as part of the fundamental design of building structures. Moreover, this survey and SHM programs will be benchmarked as a model for the development of future generation of SHM programs for all critical and essential facilities, however, but with much improved devices and technologies, which are now being considered by the author for another tall and complex building development, that is presently under construction.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.1
• /
• pp.43-51
• /
• 2013

Recently, engineering problems such as long-term settlement, differential settlement, and the resultant structural damage, have been frequently reported at construction sites. Use of Sand Compaction Piles(SCP) and Granular Compaction Piles(GCP) are good at remedying existing problems, improving bearing capacity and promoting consolidation. However, such compaction piles have the potential for clogging, which would limit their usability. Investigations into the potential for clogging in SCP, GCP, and GCP mixed with sand has not been thoroughly conducted and is the objective of this current study. Large scale direct shear tests were performed on sections of SCP, GCP, and sand mixed GCP to evaluate bearing capacity. Discrete Element Method analyses were conducted with PFC3D and Finite Element Analyses were conducted with MIDAS GTS to propose an algorithm to help reduce clogging in the granular compaction piles. Results from the large scale direct shear test and multiple simulations suggest a 70% gravel and 30% sand mixing ratio to be optimal for bearing capacity and reducing clogging.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.4
• /
• pp.33-43
• /
• 2014

Recently, the case to construct the structure on the soft clayey ground has increased and in order to the reduction of the cost of construction and maintenance on the social infrastructure facilities we have been trying to improve the soft clayey ground using the existing methods such as the pre-loading method and the vertical drain method. Like this, when various ground improvement methods are applied on the soft clayey ground, a long-term consolidation settlement will be key issue due to low permeability coefficient of cohesive soil. According to existing research results that relate to the consolidation settlement, the loading periods for existing the standard consolidation test (Oedometer test) to obtain the consolidation parameters are needed for minimum ten days or more. Therefore, in this study, the standard consolidation test (24 hours step-loading) and constant strain rate consolidation test changed by strain rate was performed using the remolded marine clay on Gwangyang bay composed of a soft clayey ground of the south-west coast. From the laboratory test results, the characteristics of compression, strain-effective stress relations by constant strain rate and the variation characteristic of the pore water pressure by different of loading speed and the relation between consolidation parameters and constant strain rate are compared and analyzed.

• Land and Housing Review
• /
• v.3 no.2
• /
• pp.127-136
• /
• 2012

The Korean government designated 10 innovation cities throughout the country in 2005 in order to resolve concentration on the capital region and to promote balanced development of localities. An innovation city is a future-type city equipped with environment for innovation and high-quality settlement environment in terms of residence, education and culture by accommodating public institutions and facilitating close cooperation among companies, universities and research institutes. Thus, for the early settlement and activation of innovation cities, this study suggested a plan to operate the current innovation city business centers from a mid- and long-term viewpoint rather than for a limited time. Through this study, we attempt to establish the roles of the centers so that they can play central roles in the move of public institutions, the development of industry-university-research institute clusters, the creation of innovations, and the spread of innovations, which are the goals of the development of public institutions, after the sites have been prepared.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.5
• /
• pp.75-83
• /
• 2019

In order to fulfill the obligation to voluntarily reduce greenhouse gas emissions under the Paris Climate Agreement, the proportion of coal and nuclear power generation is reduced worldwide and national efforts are being made to spread renewable energy including solar power generation. Korea also intends to increase the proportion of renewable energy generation to 30~35% by 2040 by introducing laws and regulations. In addition, while the country is trying to apply solar power generation to sidewalks and roads, there is no research related to it in Korea. Therefore, as a precedent study to develop solar power generation roads, solar power generation concrete blocks applicable to sidewalks and plazas were developed and the applicability was evaluated by constructing them on the site. As a result of indoor experiment, compressive strength was measured by 25.5~35.7MPa and flexural strength was measured by 5.1~10.5MPa, which showed that all domestic standards were satisfied. However, the higher the unit cement amount, the lower the strength was measured according to the mixing of the broken fine aggregate. The absorption rate was 5.7%, which satisfied the domestic standard of 7% or less. As a result of the freeze-thawing test, the reduction rate of the compressive strength after 100 cycles was up to 6.3%. As a result of measuring the settlement amount after construction, the maximum of 2.498mm was measured and irregular settlement occurred in the overall area, which is because the resolution of the sand layer was poor during construction. Maintenance techniques of sidewalk concrete block and solar panel need to be established more efficiently through long-term operation in the further.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.38
• /
• pp.303-325
• /
• 2008

China's "Foreign Trade law" 16.4 revised in 2004 like "Foreign Trade law" 16.2 in 1994 is still stipulated resource restriction to protect domestic resources and it does not satisfy the introduction of article 20 and section (g) of GATT 1994. Through an interpretation of related regulations and China-EU cokes dispute, the paper points out that China's "Foreign Trade law" 16.4 has no validity of the introduction of article 20 and section (g) of GATT 1994. Comparing China's "Foreign Trade law" 16.4 to GATT 1994 20(g), China's "Foreign Trade law" 16.4 does not include important conditions of GATT 1994 20 introduction such as not being arbitrary or unjustifiable discrimination and disguised restriction on international trade. For example, based upon China's "Foreign Trade law" , if she restricts or prohibits important natural resources that Korea mainly relies on China, it will effects not only trade between two countries but also our lives and securities. Hence, it is highly time to analyze China's the Validity of the China's Resource Export-Quota Restrictive Measures under the GATT/WTO. In the process of resolving China-EU cokes dispute in 2004, ministry of Commerce of China shows well its characteristics of dispute settlement and also we can find out EU's logical countermeasures. Therefore, because of the high possibility of disputes between Korea and China in the area of natural resources, Korea needs to pay attention to the China's resource protecting policies, and if it violates GATT 1994 20 introduction and (g), we should consider to sue China to WTO. The paper believes that it will play an important role as an aggressive demand and effect on amendment of China's "Foreign Trade law" in the long term.