• 한국결정학회지
• /
• 제12권2호
• /
• pp.76-80
• /
• 2001

Ba(Mg/sub 1/3/Nb/sub 2/3/)O₃분말을 columbite precursor 법으로 합성하고 열처리 조건을 달리하여 소결 한 다음 1 : 2 양이온 배열의 장거리 규칙도의 변화를 조사하였다. 1350℃ 소결 시편에서는 소결 시간의 증가에 의해 장거리 규칙도가 감소하였으며 1500℃-4h의 조건에서 열처리한 시편의 경우는 0.94정도의 높은 규칙도를 가졌다.

• Applied Microscopy
• /
• 제28권3호
• /
• pp.415-424
• /
• 1998

[ $Pb(Mg_{1/3}Nb_{2/3})O_3$ ] (PMN) 고용체의 고분해능 격자 이미지에 있어서 장거리 규칙도의 의존성을 컴퓨터 이미지 시뮬레이션을 이용하여 연구하였다. 컴퓨터 이미지 시뮬레이션은 multislice 방법으로 시편 두께, 초점 거리, 장거리 규칙도를 변화시켜 실시하였다. PMN에 있어서, 규칙격자 구조를 가지는 격자 이미지는 장거리 규칙도에 주로 의존하는 것을 발견하였다. 완전한 규칙격자 구조를 가지는 이미지는 유사 육방정 형태를 보였다 장거리 규칙도가 감소함에 따라, 유사 육방정 형태로부터 직사각형 형태로 변화되었고, 완전한 불규칙격자 구조를 가지는 이미지는 직사각형 형태를 보였다. 또한, 한 주어진 장거리 규칙도에서 시뮬레이션으로 얻은 이미지는 B-위치 양이온의 함량에 관계없이 거의 동일하였다.

• Applied Microscopy
• /
• 제27권1호
• /
• pp.101-109
• /
• 1997

La이 첨가되고 또한 첨가되지 않은 $Pb(Mg_{1/3}Nb_{2/3})O_3$ 고용체에서 Mg과 Nb의 비화학양론적인 구조 규칙화 현상이 고분해능 전자현미경과 컴퓨터 이미지 시뮬레이션에 의해 연구되었다. 고분해능 격자 이미지는 여러 이미지 형성 조건과 대물렌즈 구경에서 얻었다. 컴퓨터 이미지 시뮬레이션은 여러 시편 두께, 초점 거리, 장거리 규칙도에서 실시되었다. 규칙격자 구조를 가지는 영역의 격자 이미지는 장거리 규칙도에 크게 의존되는 것이 발견되었다. 규칙격자 구조를 가지는 영역에 있어서, 실험 격자 이미지와 컴퓨터 시뮬레이션 이미지의 비교로부터, 규칙격자 구조를 가지는 영역의 장거리 규칙도는 $0.2\sim0.7$의 간을 가지고 있는 것이 관찰되었다. 또한 규칙격자는 $(NH_4)_3FeF_6$ 결정구조를 가지고 있었다.

• 한국결정학회지
• /
• 제13권1호
• /
• pp.36-40
• /
• 2002

중성자회절법을 이용하여 여러 다른 조건으로 열처리한 (Fe/sub 0.61/Ni/sub 0.39/)₃V 합금 분말시료의 장거리 규칙도를 측정하여 규칙-불규칙 상전이의 정도를 조사하였다. 조사 결과 680℃-94 h 열처리 시료는 완전 불규칙 상태로 상전이가 발생하지 않았으며 면심입방구조를 보였다. T < 640℃의 조건에서 열처리한 시료들은 모두 장거리 규칙도 0 < S < 1으로 면심입방구조의 일부가 단순입방구조로 상전이 함을 보여주었다. 또한 Cowley의 S-T/T/sub c/ 관계식으로부터 465℃-144 h 으로 열처리한 시료가 열평형상태에 가장 근접하였음을 확인하였다

• Transactions on Electrical and Electronic Materials
• /
• 제14권3호
• /
• pp.111-115
• /
• 2013

The dielectric anisotropy and dispersion of the real and imaginary part of the permittivity of commercially important nematic mixture E-24 and its polymer composite were investigated in the frequency range from 1 kHz to 10 MHz, and temperature range $14^{\circ}C$ to $55^{\circ}C$. The percentage optical transmittance and density have also been measured for both the systems. The results have been explained by assuming molecular rotation about the long molecular axis, under a hindering nematic potential. The dielectric anisotropy ${\Delta}{\varepsilon}$ is positive, and the mean dielectric permittivity falls with rising temperature. ${\Delta}{\varepsilon}$ is also used to determine the order parameter with varying temperature.

• Journal of Magnetics
• /
• 제19권1호
• /
• pp.1-4
• /
• 2014

We report the correlation between the magnetic properties and lattice parameter of $Fe_xCo_{100-x}$ alloys as a function of constituent concentration. The saturation magnetization increases with Fe content and has a maximum value at approximately x=70 at.%. However, collapse in relative saturation magnetization is observed at approximately 30 at.% to 70 at.% of Fe in $Fe_xCo_{100-x}$ alloys. The collapse is due to the formation of Co-Co and Fe-Fe antibonding states instead of Fe-Co bonds. The lattice parameter also shrinks at approximately 30 at.% to 70 at.% of Fe. This shrinkage is due to an increase in the number of nearest neighbor antisite atoms, which then leads to a decrease in the long range order parameter.

• Structural Engineering and Mechanics
• /
• 제65권4호
• /
• pp.465-476
• /
• 2018

This article investigates buckling behavior of a multi-phase nanocrystalline nanobeam resting on Winkler-Pasternak foundation in the framework of nonlocal couple stress elasticity and a higher order refined beam model. In this model, the essential measures to describe the real material structure of nanocrystalline nanobeams and the size effects were incorporated. This non-classical nanobeam model contains couple stress effect to capture grains micro-rotations. Moreover, the nonlocal elasticity theory is employed to study the nonlocal and long-range interactions between the particles. The present model can degenerate into the classical model if the nonlocal parameter, and couple stress effects are omitted. Hamilton's principle is employed to derive the governing equations and the related boundary conditions which are solved applying an analytical approach. The buckling loads are compared with those of nonlocal couple stress-based beams. It is showed that buckling loads of a nanocrystalline nanobeam depend on the grain size, grain rotations, porosities, interface, elastic foundation, shear deformation, surface effect, nonlocality and boundary conditions.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.932-939
• /
• 2011

This paper deal with technique of tension length calculation for 350km/h high speed catenary system. Tension length affects in facility investment. Possibility of overlap increasing a tension length and the equipment investor decreases in order to decrease. Considers the parameter which specifies and the grudge which is possible long the fact that decides a tension length is the aim which is important plans overhead contact line. The element which decides a tension length with next following; (i) Operating range of tension device, (ii) Change of the horizontal tension which affects possibility of the effect which operates to the line and span, (iii) Tension of wire material the tensile force which is relation, (iv) Wire thermal expantion which relates with a standard temperature, (v) Curve radius, (vi) Wind velocity, (vii) Thermal range of overhead contact wire and mechanical design of tension mechanism etc.

• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1346-1354
• /
• 2002

The purpose of this work is to study the effects of specularly reflecting wall under the combined radiative and laminar free convective heat transfer in an infinite square duct. An absorbing and emitting gray medium is enclosed by the opaque and diffusely emitting walls. The walls may reflect diffusely or specularly. Boussinesq approximation is used for the buoyancy term. The radiative heat transfer is evaluated using the direct discrete ordinates method. The parameters under considerations are Rayleigh number, conduction to radiation parameter, optical thickness, wall emissivity and reflection mode. The differences caused by the reflection mode on the stream line, and temperature distribution and wall heat fluxes are studied. Some differences are observed for the categories mentioned above if the order of the conduction to radiation parameter is less than order of 10$\^$-3/ fer the range of Rayleigh number studied. The differences at the side wall heat flux distributions are observed as long as the medium is optically thin. As the top wall emissivity decreases, the differences between these two modes are increased. As the optical thickness decreases at the fixed wall emissivity, the differences also increase. The difference of the streamlines or the temperature contours is not as distinct as the side wall heat flux distributions. The specular reflection may alter the fluid motion.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권1호
• /
• pp.35-41
• /
• 2006

Although reachers have studied for a long time, they don't make criteria for anesthesia depth. anesthetists can't make a prediction about patient's reaction. Therefor, patients have potential risk such as poisonous side effect late-awake, early-awake and strain reaction. EEG are received from twenty-five patients who agreed to investigate themselves during operation with Enflurane-anesthesis in progress of anesthesia. EEG are divided pre-anesthesia, before incision of skin, operation 1, operation 2, awaking, post-anesthesia by anesthesia progress step. EEG is applied pre-processing, base line correct, linear detrend to get more reliable data. EEG data are handled by electronic processing and the EEG data are calculated by bicoherence. During pre-anesthesia and post anesthesia, appearance rate of bicoherence value is observed strong appearance rate in high frequency range($15\~30Hz$). During the anesthesia of patient, a strong appearance rate is revealed the low frequency area(0~10Hz). After bicoherence is calculated by percentage of a appearance rate, that is, Bicpara$\#$1, Bicpara$\#$2, Bicpara$\#$3 and Bicpara$\#$4 parameter are extracted. In result of bicoherence analysis, Bicpara$\#$2 and Bicpara#4 are considered that the best parameter showed progress of anesthesia effectively. And each separated bicoherence are calculated by average bicoherence's numerical value, divide by 2 area, appear by each BicHz$\#$1, BicHz$\#$2, and observed BicHz$\#$1/BicHz$\#$2's change. In result of bicoherence analysis, BicHz$\#$1, BicHz$\#$2 and BicHz$\#$1/BicHz$\#$2 are considered that the best parameter showed progress of anesthesia effectively. In conclusion, I confirmed the anesthesia progress phase, concluded to usefulness of parameter on bispectrum and bicoherence analysis and evaluated the depth of anesthesia. In the future, it is going to use for doctor's diagnosis and apply to protect an medical accident owing to anesthesia.