• 한국농공학회지
• /
• 제31권2호
• /
• pp.104-115
• /
• 1989

In an effort to clarify the wetted patterns of sandy loam soil under trickle irrigation conditions, the distance of wetted zone, infiltration capacity and soil wetted patterns, etc. were measured by gypsum block as soil moisture sensor located every 5 cm vertically and horizontaly in the soil bin under the such conditions as a). irrigation rates set to 2, 4, 6, 8 liters per hour b). total amount of water applied fixed to 14.62 liters per soil bin c) the hearing force of soil measured by plate penetrometer ranging from 1.04 to 1.22kg/cm$_2$ The results can be summarized as follows ; 1. The wetted distance in horizontal direction(H), the wetted distance in vertical direction(D), the horizontal infiltration capacity (iH) and the vertical infiltration capacity(in)could by explained as a function of time t. 2. The horizontal wetted distance (H) is explained by an exponetial function H= a$.$ t where b was found ranging from 021 to 026 under surface trickle irrigation, which was considered a lotlower than the classical value of 0.5 and these measurements were indifferent to the increasing irrigation rates. 3. As for the surface trickle irrigation where horizontal infiltration capacity(iH) is explained as iH = A $.$ t h, the coefficient A increases with respect to irrigation rates within the limits of 0.89~1.34. 4. In terms of surface trickle irrigation of the ratio of Dm Which is maximum vertical wetted distance to Hm, which is maximum horizontal wetted distance, found to be within range of 1.0 to 1.21. It was also noted that the value of Dm decreses when irrigation rates increases while the value of Hm changes the opposite direction. 5. The optimum location of sensors from emitter for surface trickle irrigation should he inside of hemisphere whose lateral radius is 28~30cm long and vertical radius is 10~12cm long. The distance between emitters should be within 60cm long. 6. In the study of vertical wetted distance( D) where D= a $.$ tb, the exponential coefficient b ranged from 0.61 to 0.75 in surface trickle irrigation, and from 0A9 to 0.68 for subsurface trickle irrigation. These measurements showed an increasing tendency to with respect to irrigation rates. 7. In case of vertical infiltration capacity( in), where iD= A $.$ t 1-h, the coefficient A for surface trickle irrigation found to be within range of 0.16 to 0.19 and did not show any relationships with varying degree of irrigation rates. However, the coefficient was varying from 0.09 to 0.22 and showed a tendency to increase vis-a-vis irrigation rates for subsurface trickle irrigation, in contrast. 8. In the observation of subsurface trickle irrigation, it was found that Dm/Hm ratio was within 1.52 to 1.91 and showed a decreasing tendency with respect to increasing rates of irrigation. 9. The location of sensors for subsurface trickle irrigation follows same pattern as above, with vertical distance from emitter being 10~17cm long and horizontal 22~25cm long. The location of emitter should be 50 cm. 10.The relationship between VS which is the volume of wetted soil and Q which is the total amount of water when soil is reached field capacity could be explained as VS= 2.914Q0.91and the irrigation rates showed no impacts on the above relationship.

• 조명전기설비학회논문지
• /
• 제30권1호
• /
• pp.87-95
• /
• 2016

Recently, the interests of the precise localization are rapidly increasing, which are linked to IoT(Internet of Things) sensors. The precise localization in indoor environment can be utilized in navigation, security, anti-collision, and various location based services etc. However, conventional positioning sensors, such as PIR, ultrasonic, microwave etc. are vulnerable to weather or insensitive to direction of subject movement or low precision performance. In this paper we implement a UWB-IR localization system for long distance and high-precision localization, which is not affected by temperature, light and weather. The proposed system was divided and designed by H/W, Antenna, S/W parts, each of which was designed based on an accurate analysis and simulation. As a result, we can implemented and verified UWB IR system with precise localization performance.

• 제어로봇시스템학회논문지
• /
• 제19권3호
• /
• pp.268-274
• /
• 2013

In this paper, the performance analysis of optics-based sensor node localization using ToF (Time of Flight) scheme is conducted. Generally, the position of the sensor node is calculated on the base station. And the base station scans neighboring sensor nodes with a laser. The laser which is reflected from one sensor node, however, can be reached to the base station at different angles according to the scanning resolution. This means that the error of the reached angle can increase and one node may be recognized as different nodes. Also the power of laser can decrease because the laser signal spread. Thus the sensor node which is located at a long distance from the base station cannot be detected. In order to overcome these problems which can be occurred in localization using ToF, the beam spot, the scanning resolution, the size of reflector and the power of laser at the sensor node were analyzed. It can be expected that the consequence of analysis can be provided in acquisition of accurate position of sensor node and construction of optics-based sensor node localization system.

• 한국항해학회지
• /
• 제25권4호
• /
• pp.371-379
• /
• 2001

We have reported the new measurement system which was substituted digital filter for the analog filter in order to develop the optimal system that could find the time delay between each sensors with high accuracy. And also we have confirmed through the experiments that the accuracy of measurements were differentiated by the methods what kind of digital filter had been adopted. This paper suggests two algorithms which approximate the sound source's bearing and distance. One is that sound source's relative bearing can be approximately regarded as the gradient of hyperbolic asymptote, the other is that the source's range can be approximated under the condition of a long range source relative to the sensor's interval. And a series of experiments were carried out with the source's distance 22.42meters and the random bearing interval within the limits of $-90^{\circ}$~$+90^{\circ}$. As a result, we have recognized that the approximation methods could measure the bearing and distance with higher accuracy than the method using trigonometric relation could do.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 춘계학술발표대회
• /
• pp.1283-1285
• /
• 2007

A wireless sensor network is the combination of a large number of deployed sensors over an area. Communication between the sensors is the most important factor for a successful sensor network. It is mandatory that long distance and multi-hop communication will occur between sensors. Generally sensors relay the sensed data of a particular territory to the command center via a base station. For the non uniformed deployment of sensors many sensors may deploy in hostile areas surrounded by full of obstacles or in other condition it may be out of the direct communication range of the base station. It seems a critical problem for routing data to and from those sensors to the base station. This paper proposes a route management scheme using a dynamic load balancing approach based on residual energy of each agent sensors.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.501-512
• /
• 2018

Radio frequency identification (RFID) sensor tag provides several advantages including battery-less operation and low cost, which are suitable for long-term monitoring. This paper presents a self-powered RFID temperature sensor tag for online temperature monitoring in substation. The proposed sensor tag is used to measure and process the temperature of high voltage equipments in substation, and then wireless deliver the data. The proposed temperature sensor employs a novel phased-locked loop (PLL)-based architecture and can convert the temperature sensor in frequency domain without a reference clock, which can significantly improve the temperature accuracy. A two-stage rectifier adopts a series of auxiliary floating rectifier to boost its gate voltage for higher power conversion efficiency. The sensor tag chip was fabricated in TSMC $0.18{\mu}m$ 1P6M CMOS process. The measurement results show that the proposed temperature sensor tag achieve a resolution of $0.15^{\circ}C$/LSB and a temperature error of $-0.6/0.7^{\circ}C$ within the range from $-30^{\circ}C$ to $70^{\circ}C$. The proposed sensor tag achieves maximum communication distance of 11.8 m.

• Smart Structures and Systems
• /
• 제16권2호
• /
• pp.243-262
• /
• 2015

Optimal sensor placement (OSP) is a critical issue in construction and implementation of a sophisticated structural health monitoring (SHM) system. The uncertainties in the identified structural parameters based on the measured data may dramatically reduce the reliability of the condition evaluation results. In this paper, the information entropy, which provides an uncertainty metric for the identified structural parameters, is adopted as the performance measure for a sensor configuration, and the OSP problem is formulated as the multi-objective optimization problem of extracting the Pareto optimal sensor configurations that simultaneously minimize the appropriately defined information entropy indices. The nondirective movement glowworm swarm optimization (NMGSO) algorithm (based on the basic glowworm swarm optimization (GSO) algorithm) is proposed for identifying the effective Pareto optimal sensor configurations. The one-dimensional binary coding system is introduced to code the glowworms instead of the real vector coding method. The Hamming distance is employed to describe the divergence of different glowworms. The luciferin level of the glowworm is defined as a function of the rank value (RV) and the crowding distance (CD), which are deduced by non-dominated sorting. In addition, nondirective movement is developed to relocate the glowworms. A numerical simulation of a long-span suspension bridge is performed to demonstrate the effectiveness of the NMGSO algorithm. The results indicate that the NMGSO algorithm is capable of capturing the Pareto optimal sensor configurations with high accuracy and efficiency.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권4호
• /
• pp.35-43
• /
• 2016

최근 지속적으로 증가하는 생활폐기물의 배출과 처리가 사회적인 문제로 대두됨에 따라 새로운 폐기물의 수거 및 운반방식으로 쓰레기 이송관로시스템이 최근 부각되고 있다. 이러한 이송관로시스템은 긴 연장을 갖기 때문에 이송관로에 문제가 발생할 경우 즉각적으로 해당 위치를 파악하여 조치할 수 있는 적절한 장기계측시스템을 적용하는 것이 필요하다. 본 연구에서는 FBG 광섬유 변형률 센서를 이용한 계측시스템의 적용성을 검토하고, 이를 이용한 최적의 계측시스템을 도출할 수 있는 자료를 확보하기 위한 실험적 연구로서, 이송관로에 발생할 수 있는 대표적인 손상유형으로 압력누출, 관로변형 및 관로폐색의 3가지 현상을 실제규모의 모형 이송관로실험체에 모사한 후 관로에 설치된 FBG센서로부터 응답을 측정하였다. 실험결과를 바탕으로 실험변수로 적용한 각각의 손상유형에 따른 효과적인 센서설치 방법과 배치방법을 도출하였다. 특히 관로변형실험 결과는 변형발생지점으로부터의 센서와의 거리에 따른 응답 상관관계를 통해 센서배치간격을 산출하여 FBG센서를 이용한 계측설계를 수행하였다.

• 문화기술의 융합
• /
• 제6권4호
• /
• pp.747-752
• /
• 2020

지역 모니터링에 사용되는 센서 네트워크는 광범위한 지역에 설치되므로, 시스템의 유지 관리가 문제가 되어 왔다. 이 연구에서는 로봇을 이용하여 센서 네트워크에 에너지를 공급하는 시스템을 제시하고, 센서 네트워크의 에너지 소모율, 로봇의 에너지 전달률, 로봇의 이동 거리 등을 변수로 하여 센서 네트워크의 유지 조건을 규명하였다. 수식을 이용한 수치 검증과 로봇 충전 시뮬레이션 검증을 통해, 도출된 시스템 유지 조건이 타당함을 보이고, 실제 충전 실험을 통해 로봇을 이용한 센서 네트워크 유지 관리 방법의 실현 가능성을 검증하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권1호
• /
• pp.138-146
• /
• 2019

LoRa LPWAN 네트워크 시스템은 비면허 무선통신을 이용하고, Mems 기반 통합센서를 통하여 Data 계측 및 기존 계측센서의 무선통신을 구현한 시스템이다. 본 시스템은 기존의 무선계측시스템 대비 장거리 통신과 기존망을 활용한 기술적/경제적인 우수성을 갖고 있으며, 유선계측시스템 대비 시스템 구축장비의 최소화로 경제성을 확보하였다. 경제성 검토항목에서 기존 유선계측 시스템 대비 약 41%의 경제적인 절감효과가 가능하다는 것을 확인하였다. 또한 유지관리 및 운영적인 측면에서도 우수하기 때문에 향후 국내에서도 많은 교량에 설치가 된다면, 교량의 유지관리 분야의 우수한 시스템으로 발전되고, 재난(지진 산사태 등), 환경(오염물 측정 및 관리 등), 플랜트 분야(화재 안전 등)에도 폭넓게 사용되길 기대한다.