• 제목/요약/키워드: Long tunnel

검색결과 646건 처리시간 0.02초

소음 및 진동을 고려한 도심지 내 대단면 수직구 발파설계 사례 -싱가포르 Transmission Cable Tunnel EW2 공구- (Blasting Design for Large Shaft in Urban Area Considering Noise and Vibration -Singapore Transmission Cable Tunnel EW2-)

  • 김지연;이효;김도훈;고태영;이승철
    • 화약ㆍ발파
    • /
    • 제31권1호
    • /
    • pp.55-63
    • /
    • 2013
  • 싱가포르 전력구 터널 건설공사는 싱가포르 내의 전력수요 증가에 대응하기 위해 지하에 400kV의 고압 전기 케이블 등 송전설비 설치를 위한 터널을 건설하는 공사이다. 본 전력구는 총연장 35km의 터널로서 18.5km의 North-South Line의 3개 공구 (NS1, NS2, NS3)와 16.5km의 East-West Line의 3개 공구 (EW1, EW2, EW3)로 나누어 건설된다. 총 6개의 공구 중 SK건설은 EW2 공구와 NS2 공구를 수주하여 현재 시공중이다. 본 프로젝트의 과업 중 지상과 고압 송전 케이블 터널을 연결하는 수직구가 공구당 3~4개소가 있으며, 시공 중에는 TBM 발진용으로 활용된다. 지하 전력구는 싱가포르 내 도심 한복판을 가로질러 건설되며, 수직구 또한 대부분 도심지 내에 있어 수직구 굴착 시 발파 효율의 극대화와 동시에 싱가포르 소음 및 진동 기준을 만족하는 최적의 발파 설계가 요구된다. 싱가포르 전력구 터널 EW2 공구의 수직구 발파는 현지 허용 진동속도기준을 준수하고 국내의 우수한 발파 설계기술을 적용하여 설계되었으며 본 설계를 통하여 국내의 우수한 발파 설계 및 시공 기술을 전파할 좋은 기회가 될 것으로 기대된다.

연약암반에서 암반의 특성을 고려한 광산갱도의 최적 설계 (Optimized Design of Mine Span Considering the Characteristics of Rockmass in Soft Ground)

  • 장명환;하태욱;정희선
    • 터널과지하공간
    • /
    • 제28권2호
    • /
    • pp.125-141
    • /
    • 2018
  • 장기적 광산 개발계획을 위하여 광산의 갱도설계는 장비계획, 운반계획, 운영계획 등의 기본이 되므로 매우 중요하다. ${\bigcirc}{\bigcirc}$광산은 생산성 향상에 중점을 둔 갱도설계가 이루어짐으로써 채광계획 변경이 매우 어렵고, 굴착갱도를 유지하기 위한 많은 노력이 필요하였다. 본 연구에서는 암반의 역학적 특성을 고려한 최적갱도를 설계하고 지보계획을 수립하고자 하였다. 이를 위하여 암반의 역학적 변수(팽윤압력, 변형계수, 지압계수)들에 대한 추정, 다양한 현장조사와 분석 등을 수행하였다. 그 결과 roof bolt 등을 활용하여 갱도유지를 하려면 갱도단면 축소 등을 고려할 필요가 있었으며, 현 갱도규격을 유지하기 위해서는 지보재와 지보방법에 대한 다양한 기능적 기술들이 필요할 것으로 분석되었다.

Safety Evaluation of the Lighting at the Entrance of a Very Long Road Tunnel: A Case Study in Ilam

  • Mehri, Ahmad;Hajizadeh, Roohalah;Dehghan, Somayeh Farhang;Nassiri, Parvin;Jafari, Sayed Mohammad;Taheri, Fereshteh;Zakerian, Seyed Abolfazl
    • Safety and Health at Work
    • /
    • 제8권2호
    • /
    • pp.151-155
    • /
    • 2017
  • Background: At the entrance of a tunnel, reflection of sunlight from the surrounding environment and a lack of adequate lighting usually cause some vision problems. The purpose of this study was to perform a safety evaluation of lighting on a very long road in Ilam, Iran. Methods: The average luminance was measured using a luminance meter (model S3; Hagner, Solna, Sweden). A camera (model 108, 35-mm single-lens reflex; Yashica, Nagano, Japan) was used to take photographs of the safe stopping distance from the tunnel entrance. Equivalent luminance was determined according to the Holliday polar diagram. Results: Considering the average luminance at the tunnel entrance ($116.7cd/m^2$) and using Adrian's equation, the safe level of lighting at the entrance of the tunnel was determined to be 0.7. Conclusion: A comparison between the results of the safe levels of lighting at the entrance of the tunnel and the De Boer scale showed that the phenomenon of black holes is created at the tunnel entrance. This may lead to a misadaptation of the drivers' eyes to the change in luminance level at the entrance of the tunnel, thereby increasing the risk of road accidents in this zone.

도심지 지하철 터널의 지반보강공법 시공사례 연구 (A Case Study on the Reinforcement Method of Subway Tunnel)

  • 천병식;여유현;최현석
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1999년도 가을 학술발표회 논문집
    • /
    • pp.201-208
    • /
    • 1999
  • The NATM(New Austrian Tunnelling Method) has been used for tunnelling since 1980's. But Collapses of tunnel under construction take place frequently, especially at urban areas because of adjacent buildings, underground conduits and traffic loads. This paper is a case study on the reinforcement method of subway tunnel at urban areas. In this study, ground inspection, geological investigation, laboratory test and numerical analysis by means of FDM program were carried out. The tunnel excavation was stopped because of over excessive brake of tunnel crown and shotcrete was installed to prevent deformation of adjacent ground as the temporary method. From the result of field survey and geological investigation, it is found that the soft weathered soil was distributed to the ground of tunnel invert unlike original investigation. The results of the analysis and the study show that the SGR(Space Grouting Rocket) method and Umbrella method can be applied for the stability of tunnel excavation and in addition the reinforcement of concrete lining is required for long-term stability of tunnel.

  • PDF

수평경사계와 천단침하계에 의한 터널막장 전후방의 천단침하 계측 (Measurement of Tunnel Arch Settlements Ahead of and Behind the Tunnel Face Using a Horizontal Inclinometer and Settlement Pins)

  • 김치환
    • 터널과지하공간
    • /
    • 제23권2호
    • /
    • pp.120-129
    • /
    • 2013
  • 터널시공 중 발생한 변위를 설계단계에서 설정한 계측관리 기준변위와 비교하여 터널의 안정성을 평가할 때에는 터널막장 후방뿐만 아니라 전방에서 발생하는 변위를 포함한 총변위를 이용하여야 한다. 터널 시공 중 발생하는 총변위를 알기 위하여 터널막장에서 전방을 향해 수평경사계를 설치하여 지중침하를 계측하였고 터널 막장 후방에서는 천단침하계를 이용하여 터널의 천단침하를 계측하였다. 이를 통하여 터널시공 중 발생하는 총천단침하를 계측할 수 있었고 터널막장 전후방 종단선상의 침하곡선 특성도 분석하였다.

장대도로터널의 자연환기력 예측 사례연구 (A case study for prediction of the natural ventilation force in a local long vehicle tunnel)

  • 이창우;김상현;길세원;조우철
    • 한국터널지하공간학회 논문집
    • /
    • 제11권4호
    • /
    • pp.395-401
    • /
    • 2009
  • 장대터널의 환기 및 방재시스템 설계시 주요한 요소설계인자 중 하나인 자연환기력은 그 중요성에도 불구하고 관련 영향변수들의 상호관계는 정량화가 매우 복잡하여, 자연환기력에 의한 유입 자연풍에 관한 설계기준을 정량적 근거하에서 제시하고 있지 못하다. 최근 발생한 터널화재에 의한 문제 및 터널 이용자에 의한 보다 나은 공기질에 대한 요구 등으로 터널 환기시스템의 최적화가 시급히 필요하며, 따라서 최적화의 주요 설계인자인 자연환기력에 대한 연구가 절실히 요구된다. 본 연구에서는 국내 최장대 도로터널로 계획된 인제터널(연장 10.9 km)을 대상으로 자연환기력의 예측을 목적으로 하였다. 지형적 요인에 의한 외부풍의 풍압에 기인하는 자연환기력의 최대 가능수준을 예측할 수 있는 기압장벽고의 개념을 적용하여 외부풍에 의한 자연환기력을 추정하고 터널내외부 공기 밀도차로 인한 굴뚝효과에 따른 자연환기력을 동시에 분석하였다.

Flutter suppression of long-span suspension bridge with truss girder

  • Wang, Kai;Liao, Haili;Li, Mingshui
    • Wind and Structures
    • /
    • 제23권5호
    • /
    • pp.405-420
    • /
    • 2016
  • Section model wind tunnel test is currently the main technique to investigate the flutter performance of long-span bridges. Further study about applying the wind tunnel test results to the aerodynamic optimization is still needed. Systematical parameters and test principle of the bridge section model are determined by using three long-span steel truss suspension bridges. The flutter critical wind at different attack angles is obtained through section model flutter test. Under the most unfavorable working condition, tests to investigate the effects that upper central stabilized plate, lower central stabilized plate and horizontal stabilized plate have on the flutter performance of the main beam were conducted. According to the test results, the optimal aerodynamic measure was chosen to meet the requirements of the bridge wind resistance in consideration of safety, economy and aesthetics. At last the credibility of the results is confirmed by full bridge aerodynamic elastic model test. That the flutter reduced wind speed of long-span steel truss suspension bridges stays approximately between 4 to 5 is concluded as a reference for the investigation of the flutter performance of future similar steel truss girder suspension bridges.

An overview of several techniques employed to overcome squeezing in mechanized tunnels; A case study

  • Eftekhari, Abbas;Aalianvari, Ali
    • Geomechanics and Engineering
    • /
    • 제18권2호
    • /
    • pp.215-224
    • /
    • 2019
  • Excavation of long tunnels by shielded TBMs is a safe, fast, and efficient method of tunneling that mitigates many risks related to ground conditions. However, long-distance tunneling in great depth through adverse geological conditions brings about limitations in the application of TBMs. Among various harsh geological conditions, squeezing ground as a consequence of tunnel wall and face convergence could lead to cluttered blocking, shield jamming and in some cases failure in the support system. These issues or a combination of them could seriously hinder the performance of TBMs. The technique of excavation has a strong influence on the tunnel response when it is excavated under squeezing conditions. The Golab water conveyance tunnel was excavated by a double-shield TBM. This tunnel passes mainly through metamorphic weak rocks with up to 650 m overburden. These metamorphic rocks (Shales, Slates, Phyllites and Schists) together with some fault zones are incapable of sustaining high tangential stresses. Prediction of the convergence, estimation of the creeping effects and presenting strategies to overcome the squeezing ground are regarded as challenging tasks for the tunneling engineer. In this paper, the squeezing potential of the rock mass is investigated in specific regions by dint of numerical and analytical methods. Subsequently, several operational solutions which were conducted to counteract the challenges are explained in detail.

W-CDMA Uplink Capacity and Interference Statistics of a Long Tunnel Cigar-Shaped Microcells

  • Taha-Ahmed, Bazil;Calvo-Ramon, Miguel;Haro-Ariet, Leandro De
    • Journal of Communications and Networks
    • /
    • 제6권2호
    • /
    • pp.106-111
    • /
    • 2004
  • The uplink capacity and the interference statistics of the sectors of the cigar-shaped W-CDMA microcells are studied. A model of 9 base station, assumed to be in a long tunnel, is used for the uplink analysis. The capacity and the interference statistics of the microcells are studied for different sector ranges, different propagation exponents, different antenna sidelobe levels, and different bend losses.

터널의 기하학적 형태 및 캐노피 설치가 터널 환기 및 화재 확산에 미치는 영향 분석 (The Effects of Tunnel Geometrical Characteristics and Canopy Installation on the Ventilation and Fire Propagation)

  • 이창우;서기윤;김정욱
    • 한국터널지하공간학회 논문집
    • /
    • 제8권4호
    • /
    • pp.325-334
    • /
    • 2006
  • 시계조절이나 설해방지 목적으로 설치되는 캐노피 구간 내에서의 기류유동특성의 이해는 정상환기 뿐만 아니라 비상시 대처방안 강구를 위한 요건이다. 또한 터널 방재시스템 설계를 위하여서는 종단구배, 평면선형, 단면크기 및 형태 등과 같은 터널의 다양한 특성이 화재확산에 미치는 영향에 대한 정량적인 이해가 필요하다. 본 연구에서는 국내도로터널의 전형적인 특성을 적용한 터널에 캐노피가 된 경우와 종단 및 선형구배, 단면적 및 형태, 곡선구간이 환기 및 화재확산에 미치는 영향을 CFD분석함을 목적으로 하였다. 분석결과 145m길이의 캐노피인 경우 50%정도의 개구율이 기류유동 패턴 및 환기효과면에서 가장 바람직하였다. 1.8km 터널내에서 20MW 화재발생시 종단구배는 풍속분포와 화재연 확산에 큰 영향을 미치며 제트팬$({\varnothing}1250)$ 4대를 가동한 경우 화재발생 후 5분 경과시 하류 40m지점 부근에서의 화재연 농도는 +2% 구배에서는 13% 감소, -2% 구배의 경우에는 20%정도 증가하며 또한 backlayering거리가 45m정도에 달한다. 직사각형 단면터널의 경우, 화재연 농도 및 풍속분포는 말굽형 터널과 비교하여 현저한 차이가 관찰되지 않는다. 3차선 터널에서는 이들 변수는 모두 감소하며 100초 경과시 50m 정도의 backlayering을 보이며 이후 서서히 감소한다. 곡선터널인 경우는 화재연의 확산이 느리며 100초 경과시 50m에 달하던 backlayering현상은 급격히 사라진다.