• Journal of Environmental Science International
• /
• v.31 no.5
• /
• pp.389-404
• /
• 2022

The purpose of this study is to evaluate the vegetation recovery status of Mudeungsan National Park Jungmeorijae, Jeungsimsa district restoration site, and the Shimwon Valley ecological landscape restoration site in Jirisan National Park. Compared to the control plots, the Jungmeorijae restoration site was analyzed to have height growth of about 73.5%, the average species diversity index of about 75.2%. and the average similarity index was recovered to 7.75%. In the case of the restoration site in Jeungsimsa district, the height growth compared to the control plots was about 69.2%, the average species diversity index was about 55.0%. and the average similarity index was recovered to 25.65%. In the case of the Shimwon Valley ecological landscape restoration area, the height growth compared to the control plots was about 32.6%, the average species diversity index about 176.7%. and the average similarity index was recovered to 0.85%. The restoration site of the Jeungsimsa district was planted with relatively large trees during restoration work, and it took a relatively long time(20 years). Also, the site had less limiting factors due to the low elevation, allowing the degree of vegetation recovery to be higher than that of other sites.

• Journal of The Geomorphological Association of Korea
• /
• v.26 no.1
• /
• pp.15-26
• /
• 2019

In this study, we investigated the grain size, lithological type, and shape of coarse bed materials in the upper and middle reaches of Gongneungcheon River. For this purpose, 11 sampling points were selected along the river. For 100 samples of the coarse bed materials at each point, three axes (long, intermediate, and short) of samples were measured, and their lithological types were also identified. By measuring grain size, the sphericity and flatness of samples were calculated. Finally, every particle was classified into four shape categories: sphere, disc, blade and rod. We found that the grain size in incised meandering reach is the largest. This is mainly due to the supply of coarse materials from steep valley sides along the meandering channel. According to the lithological analysis, all samples were identified as granite, gneiss and schist, and quartz. The proportion of granite decreased, whereas the proportion of gneiss and schist increased downstream. These patterns indicate that the bedrock distribution within the study area accounts for the downstream lithological variation of coarse bed materials. With regard to the grain shape, sphericity gradually decreased while flatness gradually increased downstream. In the case of the shape classification, unlike the general downstream pattern of grain shape, the proportion of the sphere type decreased and the proportion of the blade type increased downstream. Such a reversal change in the downstream direction turns out to be determined by the lithology (such as foliation, bedding and the pattern of weathering) of coarse bed materials.

• Korea Journal of Hospital Management
• /
• v.13 no.3
• /
• pp.1-16
• /
• 2008

According to Myers (1984) and Myers and Majluf(1984), there exists a financial hierarchy from internal to external financing, from long-tenn debt to equity, due to information costs. The purpose of this study is to assess the profit-making corporation of healthcare institutions. Data was collected from 130 hospital presidents and financial managers. We analysed the frequency and one way ANOVA by SPSS Windows 14.0K. The major findings of the study were as follows: We found that the priorities which a healthcare institutions financing were internal financial, other allowance, a credit loan, a security loan, and a lease through this study. The priorities which a healthcare institutions raised the capital differed as to the number of beds and revenues. The priorities were no difference from ownership, location and an annual business.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.180-182
• /
• 2005

Fingerprint-based identification is known to be used for a very long time. Owing to their uniqueness and immutability, fingerprints are today the most widely used biometric features. Therefore, recognition using fingerprints is one of the safest methods as a way of personal identification. But fingerprint identification system has a critical weakness. Since the fingerprint identification time dramatically increase when we compare the unknown fingerprint's minutiae with fingerprint database's minutiae. In this paper, a ridge orientation extraction method using Index table is proposed to solve the problem. The goal of fast direction image extraction is to reduce the identification time and to improve the clarity of ridge and valley structures of input fingerprint image.

• Earthquakes and Structures
• /
• v.3 no.6
• /
• pp.853-867
• /
• 2012

In this paper, a new type of passive energy dissipating system similar to added damping and stiffness (ADAS) and triangular added damping and stiffness (TADAS) is proposed and implemented in the analytical model of a building with hybrid structural system in the structure's base which we call it; Telescopic column. The behavior and performance of a high rise R.C. structure equipped with this system is investigated and compared with conventional base isolation systems such as rubber isolator bearings and friction pendulum bearings. For this purpose a series of ground acceleration records of the San Fernando, Long Beach and Imperial Valley earthquakes are used as the disturbing ground motions in a series of numerical simulations. The nonlinear numerical modeling which includes both material and geometric nonlinearities were carried out by using SAP2000 program. Results show suitable behavior of structures equipped with telescopic columns in controlling the upper stories drifts and accelerations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.530-532
• /
• 2002

This paper presents an optimum design of herringbone grooved journal bearing for spindle motor of hard disk drive (HDD) system. In addition to the conventional “rectangular” groove, various groove profiles are designed. The stiffness and damping coefficients of the oil film and frictional torque are calculated and compared for tile various groove profiles. The “circular”, “valley”, and “reversed saw tooth” grooves do not produce high direct stiffness, since they partly increase the groove depths in the direction of lubricant flow, causing to reduce the pumping action of the bearing. The maximum direct stiffness can be obtained by the “rectangular”, “saw tooth”, and “step” grooves. With the same cross sectional area of the grooves, these three grooves have the same maximum stiffness, damping coefficients, and frictional torque. Among these recommendable grooves, the saw tooth groove may keep its original profile for long, enduring metal-to-metal contact during startup and shutdown.

• Journal of the Korean Society of Food Culture
• /
• v.9 no.1
• /
• pp.61-69
• /
• 1994

Northern Kyungbuk around Andong is a mountainous and more or less dry region geomorphogically. Since this area located in the valley was less invaded by foreign countries, the folk traditions have been maintained for a long time. Also as the center of Confucian culture, this region respects ceremonies and so, the simple and noble ceremonial-foods such as Ddok, Hankwas, and Buchiki have been firmly preserved in many distinguished families. And besides Andong-Soju, many traditional liquors produced in different methods can be found in this region. As Gogi-Sikhae(a fermented beverage utilizing rice and fish) is still preserved in eastern coastal area, Sosikhae(Sikhae without fish) is maintained in this region and furthermore the unique Andong Sikhae developed by modifying Sosikhae is being consumed currently. Since it is difficult to get fish here geographically, the soybean foods were developed for protein intake, for example, various fermented soybean pastes, Andong-Songuksu(a hand-made noodle using raw soybean flour), and Siragiguk(a vegetable soup).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.1
• /
• pp.59-65
• /
• 2018

A new single-stage flyback power converter with PFC for electrolytic capacitor-less LED driver is proposed in this study. This method minimizes the peak-to-average ratio of the LED driving pulsating current by adding the LED driving current near the LED current valley area, as well as the third harmonic component injection into the input current. The reduced peak current value of the LED drive current minimizes the thermal stress of the LED itself, thereby increasing the reliability of the LED, as well as achieving a long lifetime. Simulation and experimental results show the usefulness of the proposed topology.

• Journal of Korean Society of Forest Science
• /
• v.77 no.4
• /
• pp.401-413
• /
• 1988

To investigate the users' activity, impact and psychology in Naejang Temple district at Mt. Naejang National Park in Korea, users' density and questionnaire survey at three major picnic areas and passenger counting at major pass were executed and environmental impacton on the site was surveyed. The total number of visitors showed stability at the level of one million persons every year after 1984. Users' impact was much severe along the main trail, the upper cablecar station and the slope from the observatory to Keumsun Valley, The maximum momentary number of users was estimated as 53,000 persons in autumn. Approximately 20% of the total number of visitor used Keumsun Valley and Weonjeok Valley area and 80% of visitors left after using only grassland and cablecar. The visitors' characteristics was similiar to the type of long-distanced national park and the main visiting purpose was to see autumn leaves. The psychological satisfaction did not very significantly as to increasing user's speace. As a result of varimax rotated factor analysis, the 1st factor, most affecting users' psychological satisfaction, was related to landscape and consisted of nature disturbance, crowdedness, noisiness, cleanness, in order of importance. The 2nd factor was related to facilities and consisted of number of toilet, number of waste-baskets, amount of drinking water, safety, in order of importance.

• Korean Journal of Environment and Ecology
• /
• v.33 no.6
• /
• pp.686-694
• /
• 2019

This study was carried out to identify the long-term changes to beech forest due to climate change in Ulleung-do. To study the traits of the stand structure of beech forest with micro-topography, we investigated the distribution of the basal area, important values, and indicated species in a small ridge between Albong basin and Seongin-bong peak, and 1-ha stands (20 m × 20 m, 25 sites) dominated beech species including on the upper slope and valley parts. The result showed that the indicator species characterizing the vegetation communities were Tsuga sieboldii, Rhododendron brachycarpum, and Mitchella undulata in the small ridge and Celtis jessoensis, Dryopteris crassirhizoma, and Ulmus laciniata in the valley part. Moreover, the individuals with the total DBH < 10 cm were more predominant in the small ridge and upper slope than in the valley part, the individuals with DBH = 10-25 cm were predominant in the small slope, and individuals with DBH = 25-45 cm and DBH > 45 cm were predominant in the upper slope. The reason for the predominant distribution of beech stand with DBH<10 cm in all terrains is suggested to be germination by nutritional propagation rather than secondary succession caused by artificial disturbances and seed propagation.