• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.791-796
• /
• 2011

In order to understand long range wave propagation in railway tracks, it is required to identify how far vibrations can travel along a rail. To answer this question, the attenuation characteristics of the main propagating waves are required as a function of distance. In this work, it is identified which wave types predominantly propagate on various regions of the rail cross-section. Then decay rates of propagating waves in railway tracks are investigated for frequencies up to 80 kHz. A numerical method called the Wavenumber Finite Element (WFE) method is utilized to predict dispersion curves and decay rates for a rail on a continuous foundation. In order to validate the simulated results, measurements have been performed on a test track and an operational railway track. The measured results are compared with the output of the simulations and good agreements are found between them.

• International Journal of Safety
• /
• 제8권2호
• /
• pp.1-4
• /
• 2009

Various falling prevention systems with vertical guided rail have been supplied in order to prevent falling accidents and acquire the long life and cost down for the maintenance. Almost the imported system is composed of a guided rail and the comfort components. It has the mechanism that cannot be dismounted from the guided rail at the accident site. Thus, the aim of this study is to develop a falling prevent system that has a direct dismounting function, which can release easily from the falling accident point. This system has a high durability and robust. And the cost efficiency of the system and safety for workers also are improved remarkably. From the results, we showed the proposed new falling system is sufficiently safety and satisfies the KOSHA regulation through the numerical stress analysis. Also it is expected as the useful and effective safety device for workers.

• 한국재난정보학회 논문집
• /
• 제8권3호
• /
• pp.267-275
• /
• 2012

본 논문은 한반도에 처음으로 철도가 등장한 이래 검토하지 않았던 국가철도망 계획을 추진한 것이 1998년도로 이를 통하여 새로운 철도시대가 시작되었다. 그 후 반복적인 국가철 도망 계획이 수립되어 국가기간교통망으로 그 역할을 대행하면서 철도의 가치를 제시하고 있다. 그러나 이러한 국가철도망 계획은 예산의 제약 속에서 선구별 그리고 연간 단위당 재원투입 양의 제약, 열차운행의 정합성 등으로 문제가 있으나 시설중심의 계획이 반복되고 있다. 따라서 1998년도에 국가철도망계획이 처음 수립된 이후 수정 등에 새로운 방안 그리고 사회간접자본에 대한 인식의 변화 등으로 고려한 방안의 검토가 필요하다. 따라서 본 논문은 국가철도망 구축에 따른 시간적 변화에 따른 사회간접자본에 대한 시각차이, 국가사회경제적 기반의 변화, 자연재해에 대한 인식의 차이 등의 관점에서 그 변화를 검토하는 것이 그 내용이다.

• Journal of Power Electronics
• /
• 제5권2호
• /
• pp.166-172
• /
• 2005

The basic equations of a doubly-fed long-stator linear motor for a shuttle-based railway system are established. They show which degrees of freedom exist for controlling the motor. The ratio of stator and rotor current proves to be an important parameter in determining the design of motors, converters and mechanics.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.54-60
• /
• 2012

In this paper, a new permanent-magnet (PM) linear motor is proposed, in which both the magnets and armature windings are placed in the short mover, while the long stator consists of iron core only. Hence, this new PM linear motor can be called a primary permanent-magnet linear motor. It exhibits the advantages of robustness, low cost, high efficiency, high power factor, and high thrust force density. It is especially suitable for long stator applications such as urban rail transit. In this paper, the topology and operation principle of this motor are discussed in detail. The steady-state characteristics including field distributions, flux-linkage, back-EMF, phase inductance and thrust force are investigated. In addition, the technique of skewing stator teeth is adopted to improve the electromagnetic performance. Results from finite element method (FEM) verified the theoretical analysis results.

• 한국산학기술학회논문지
• /
• 제17권11호
• /
• pp.202-207
• /
• 2016

장대 터널 및 급곡선 구간과 같은 시계 확보가 어려운 지역에서 위험 및 안전 정보를 함께 공유하기 위해서는 기관사, 열차 관제사 및 현장 작업자 사이에 보조적인 실시간 열차 정보 통신시스템의 개발이 필요하다. 이에 적합한 열차 정보 통신시스템을 개발하기 위하여 본 연구에서는 작은 노이즈와 신호 감쇄를 동시에 갖도록 하는 레일 전력선 통신을 제안하였다. 이에 대한 레일 전력선 통신의 기초 연구 일환으로서, 본 통신기법의 전송 특성을 향상할 수 있는 레일에 대한 임피던스 측정 및 정합특성 평가가 중요하다. 본 연구에서는 자체 제작한 임피던스 정합 트랜스포머와 네트워크 분석기를 이용하여 레일에 대한 반사 및 전파 특성을 평가하였다. 대향 접속방식의 임피던스 반사특성 시험결과로부터 레일 전력선 통신에 적합한 정합용 트랜스포머의 정합비율은 1:3.28임을 알 수 있었다. 또한, 제작한 임피던스 정합용 트랜스포머는 레일 전력선통신에서 투과 신호 전송을 향상할 수 있음을 확인하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권2호
• /
• pp.186-192
• /
• 2012

Half-rail stacked drivers are used to reduce power consumption of the drivers for synchronous buck converters. In this paper, the stacked driver is optimized by matching the average charging and discharging currents used by high-side and low-side drivers. By matching the two currents, the average intermediate bias voltage can remain constant without the aid of the voltage regulator as long as the voltage ripple stays within the window defined by the hysteresis of the regulator. Thus the optimized driver in this paper can minimize the power consumption in the regulator. The current matching requirement yields the value for the intermediate bias voltage, which deviates from the half-rail voltage. Furthermore the required capacitance is also reduced in this design due to decreased charging current, which results in significantly reduced die area. The detailed analysis and design of the stacked driver is verified through simulations done using 5V MOSFET parameters of a typical 0.35-${\mu}m$ CMOS process. The difference in power loss between the conventional half-rail driver and the proposed driver is less than 1%. But the conventional half-rail driver has excess charge stored in the capacitor, which will be dissipated in the regulator unless reused by an external circuit. Due to the reduction in the required capacitance, the estimated saving in chip area is approximately 18.5% compared to the half-rail driver.

• 한국분무공학회지
• /
• 제21권3호
• /
• pp.155-161
• /
• 2016

Injected fuel pressure waves of a common rail injector with various current profiles supplied to the injecor were measured using Bosch method. In order to drive the common rail injector, the current in the solenoid should be controlled using what is known as a peak and hold pattern, which consists of a high current level with a short time duration (peak) in the first step and a low current level with a long time duration (hold) in the subsequent step. The current profile can be shaped by swithcing an injector driving power source with the peak and hold waves. The capture, compare and PWM (CCP) pin in the microprocessor was used to generate the combined peak and hold waves. The PWM square wave generated from the CCP pin has a duty ratio of 100% for the peak current and 10% or 30% for the hold pattern. Five patterns of the current profile were generated by combining the peak and hold wave. The common rail pressure is controlled at 75, 100, and 130 MPa. As the fuel rail pressure increases, the variations of the measured fuel injection pressure wave according to the current profiles decrease.

• 한국소음진동공학회논문집
• /
• 제25권9호
• /
• pp.620-627
• /
• 2015

Long continuous bridge deck can become contracted considerably as temperature drops, which can lead to a large expansion of sleeper span at the end of it. Since this huge sleeper span then can cause problems both with safety of train operation and structural stability of tracks, it is necessary to take the issue into consideration systematically in the designing process of the bridge. In this paper, an evaluation process through the analysis of train-track interaction was presented which can basically review the effects of the expansion of sleeper span at the end of long continuous bridge deck on the safety of the train and the structural stability of the track. The analyses of the interaction between the light rail train and tracks were carried out targeting the sleeper span as a main parameter. The safety of train operation and structural stability of tracks in a light rail system due to the expansion of the sleeper span were evaluated by comparing the numerical results with the related criteria.

• 한국도시철도학회논문집
• /
• 제6권4호
• /
• pp.339-350
• /
• 2018

도시철도에서 지하 터널의 미세먼지는 여러 가지 요인에 의하여 발생하고 있다. 도시철도 미세먼지 발생량을 예측하기 위하여 여러 가지 발생요인 중 레일 마모량 분석에 관한 연구를 수행하였다. S호선 구간(약 45km)에서 1년 6개월 간 레일마모측정장치에서 측정된 레일 마모 데이터를 곡선반경(R)의 변화에 따라 약 170개 구간으로 구분하였으며, 레일 마모 측정값 중에서 직마모량(C0)와 편마모(V0)량을 이용하여 곡선반경에 따른 레일 마모량 관계를 분석하고, 직선구간과 곡선구간에서 각각 구간평균 편 직마모량과 노선평균 편 직마모량을 산출하였다. 레일 마모량과 레일 단면적의 상관관계를 분석하여 단면적에 대한 근사식을 구하고, 레일 C0와 V0의 변화량을 이용하여 레일 마모에 의한 미세먼지 발생량을 산정하였다.