• The Journal of Internal Korean Medicine
• /
• v.30 no.3
• /
• pp.510-524
• /
• 2009

Objective : This study was designed to find the correlation between Sasang Constitution and heart rate variability(HRV). Method : There were 665 subjects (280 men and 385 women), between 39 and 72 years old. in a rural community. Sasang Constitution was diagnosed by a Sasang constitutional specialist using PSSC (Phonetic System for Sasang Constitution), face and tongue photo and checkup-list. A structured-questionnaire was used to assess the general characteristics. HRV was recorded using SA-2000 (medi-core). HRV was assessed by time domain and by frequency domain analysis. Metabolic syndrome was defined on the basis of clustering of risk factors, when three or more of the following cardiovascular risk factors were included : blood pressure, fasting blood sugar, triglyceride HDL-cholesterol, and abdominal obesity (waist). Because of the skewness of the data, logarithmic transformation was performed on the absolute units of the spectral components of HRV, and the resulting logarithmic values and normalized units were compared between the groups by a logistic regression. The 95% confidence interval (CI) of the odds ratio was used and calculated from the data laid out for a cross sectional study. Results : 1. Odds ratios of Taeeumin and Soeumin in female adults below 60 years old were significantly lower than that of Soyangin in LF norm and LF/HF ratio. Odds ratios of Taeeumin and Soeumin in female adults below 60 years old were significantly higher than that of Soyangin in HF norm. 2. There was no significant correlation between HRV and Sasang Constitution in female adults from 60 years old and over. 3. There was no significant correlation between HRV and Sasang Constitution in male adults. Conclusion : There is a statistically significant correlation between the HRV and Sasang Constitution. There is a tendency of increase in the sympathetic activity in Soyangin. There is a tendency of decrease in the parasympathetic activity in Taeeumin and Soeumin.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.151-159
• /
• 2008

Performances of retroreflectivity vary place to place, according to traffic volumes and time lengths after striping, depending on pavement marking materials and colors. The present paper uses the nation wide data of retroreflectivity, which has been collected from freeways and then tries to develop the regression curve setting traffic volume and service life as independent variables and retroreflectivities as dependent variables. The DB system includes two year's measurement in $2005{\sim}2006$ over Korean freeway pavement marking at an interval of three months for the period. The mobile measurement system, a laserlux, was employed for the purpose. The DB has provided a lot of information about materials and performance of the specific pavement marking such as geometric features, traffic volumes, material characteristics and the installation date. This study provides the comparison of pavement marking performances under diversified conditions. Based on accumulated pavement marking performances, this study provides performance curves based on the diversified factors. The goal of the retroreflectivity modeling is to develop equations that can be used to estimate an average retroreflectivity of pavement markings as a function time since application and traffic volume. After representing the variation of retroreflectivities and estimating regression curves by linear, exponential, logarithmic and power function, the regression curve which had the highest coefficient of determination and the value similar to the last field measurement was regarded as the retroreflectivity decay model. As a result of verification, the decay model showed the signification within the 90% confidence level and especially showed the clear relation with field data according to increase of cumulative vehicle exposure. Accordingly, these models can be used to determine service lives, retroreflectivity degradation rates, and retroreflectivity of new markings.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.12 no.1
• /
• pp.42-62
• /
• 2008

Objectives: It is well known that some parameters of the photoplethysmogram (PPG) acquired by time domain contour analysis can be used as markers of vascular aging. But the previous studies that have been performed for frequency domain analysis of the PPG to date have provided only restrictive and fragmentary information. The aim of the present investigation was to determine whether the harmonics extracted from the PPG using a fast Fourier transformation could be used as an index of vascular aging. Methods: The PPG was measured in 600 recruited subjects for 30 second durations, To grasp the gross age-related change of the PPG waveform, we grouped subjects according to gender and age and averaged the PPG signal of one pulse cycle. To calculate the conventional indices of vascular aging, we selected the 5-6 cycles of pulse that the baseline was relatively stable and then acquired the coordinates of the inflection points. For the frequency domain analysis we performed a power spectral analysis on the PPG signals for 30 seconds using a fast Fourier transformation and dissociated the harmonic components from the PPG signals. Results: A final number of 390 subjects (174 males and 216 females) were included in the statistical analysis. The normalized power of the harmonics decreased with age and on a logarithmic scale reduction of the normalized power in the third (r=-0.492, P<0.0001), fourth (r=-0.621, P<0.0001) and fifth harmonic (r=-0.487, P<0.0001) was prominent. From a multiple linear regression analysis, Stiffness index, reflection index and corrected up-stroke time influenced the normalized power of the harmonics on a logarithmic scale. Conclusions: The normalized harmonic power decreased with age in healthy subjects and may be less error prone due to the essential attributes of frequency domain analysis. Therefore, we expect that the normalized harmonic power density can be useful as a vascular aging marker.

• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.169-174
• /
• 2007

In this study, we examined the characteristics of alkali gelatinization of corn starch. Here, the degree of corn starch gelatinization increased exponentially with the NaOH concentration of the starch slurry. The alkali gelatinization initiation point (AGIP) was obtained from the intersection point of gelatinization slope line, which resulted from the regression of the logarithmic degree of gelatinization, and was markedly changed. The effects of temperature and corn starch concentration on alkali gelatinization were studied with a 10%(w/w) corn starch suspension. We found that this corn starch suspension gelatinized in 24.1 meq/g starch of NaOH at $40^{\circ}C$, and in 9.8 meq NaOH/g starch at $60^{\circ}C$. Moreover, a 40%(w/w) corn starch suspension gelatinized with 9.5 meq NaOH/g starch, even at $40^{\circ}C$. These results indicate that the amount of alkali added for the gelatinization of corn starch has an inverse relationship with the temperature and concentration of corn starch.

• The Journal of the Korea Contents Association
• /
• v.16 no.9
• /
• pp.127-135
• /
• 2016

We identified a competition network which has never been studied before and investigated the relationship between centrality of participants in singing competition and their winning percentage within the competition network. We collected competition data from 'Immortal Songs: Singing the Legend', which is a Korean television music competition program, and constructed a competition network. We calculated centrality and winning percentage and analyzed their relationship using correlation analysis, regression analysis, and visualization. There are four main findings in this research. First, a competition network is a scale-free network whose degree distribution follows a power law. Second, there is a logarithmic relationship between the count of competition and closeness. Third, winning percentage converges to approximately 60% for players who have participated in more than 20 competitions. Lastly, a strength of opponents affects approximately 23% of winning percentage for players with less than 20 competitions. The academic significance of this study is that we pioneered the definition of the competition network and applied social network analysis method. Another significant contribution of this paper is that we found explicit patterns between the centrality and winning percentage, suggesting ways to improve social relationship in competition network and to increase winning percentage.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.25 no.3
• /
• pp.125-130
• /
• 2019

Shock and vibration inputs are transmitted from the vehicle through the packaging to the fruit. Inside, these cause sustained bouncing of fruits against each other and container wall. These steady state vibration input may cause serous fruit injury, and this damage is particularly severe whenever the fruit inside the package is free to bounce, and is vibrated at its resonance frequency. The determination of the resonance frequencies of the fruit and vegetables may help the packaging designer to determine the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. Instrumentation and technologies are described for determining the vibration response characteristics of the pears for exporting with frequency range from 10 to 200 Hz, sweep rate of 1 octave/min, sweep method of logarithmic up and down and acceleration levels of 0.2, 0.4, 0.6, 0.8 and 1.0 G considering the domestic transportation environment. The resonance frequency of the pears ranged from 49.04 to 87.16 Hz and the amplitude at resonance was between 0.96 and 4.02 G in test frequency band and acceleration level. The resonance frequency and amplitude at resonance frequency band of the pears decreased with the increase of the sample mass. The multiple nonlinear regression equations for predicting the resonance frequency of the pears were developed using the independent variables such as mass, input acceleration.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.7
• /
• pp.462-469
• /
• 2015

This study was carried out to examine characteristics of various acoustic indicators evaluating speech intelligibility such as reverberation time(T₃₀), D₅₀, C₅₀ and speech transmission index(STI) in Korean elementary school classrooms. Results showed that mean T₃₀ at middle frequencies(500 Hz to 2000 Hz) measured in 9 classrooms was about 0.75 s, which exceeds a regulation specified on American National Standards(ANSI); 0.60 s. Mean D₅₀, C₅₀ and STI were 60 % to 66 %, +2 dB to +3 dB, and 0.65, respectively. The maximum difference in D₅₀ and C₅₀ according to different receiver points in a classroom was 13 % and 2.5 dB, while the maximum difference in T₃₀ was 0.03 s. Whereas STI measured in classrooms has relatively low correlation with other indicators, correlation between D₅₀ and C₅₀ was high, R²=.9964. In addition, T₃₀ and C₅₀ were fitted well as logarithmic regression curve with R²=.9610. It was +3.73 dB in C₅₀ and 68 % in D₅₀ which are the value corresponding to 0.60 s in T₃₀ on this curve.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.6
• /
• pp.305-312
• /
• 2019

PURPOSE. The purpose of this study was to compare computer-aided design/computer-aided manufacturing (CAD/CAM) abutment and prefabricated abutment in Morse taper internal connection type implants after cyclic loading. MATERIALS AND METHODS. The study was conducted with internal type implants of two different manufacturers (Group Os, De). Fourteen assemblies were prepared for each manufacturer group and divided into 2 groups (n=7): prefabricated abutments (Os-P, De-P) and CAD/CAM abutments (Os-C, De-C). The amount of axial displacement and the removal torque values (RTVs) were measured before and after cyclic loading (10⁶ cycles, 3 Hz with 150 N), and the tensile removal force to dislodge the abutments was measured after cyclic loading. A repeated measures ANOVA and a pattern analysis based on the logarithmic regression model were conducted to evaluate the effect of cyclic loading on the axial displacement. The Wilcoxon signed-rank test and the Mann-Whitney test was conducted for comparison of RTV reduction% and tensile removal forces. RESULTS. There was no significant difference between CAD/CAM abutments and prefabricated abutments in axial displacement and tensile removal force; however, significantly greater RTV reduction% after cyclic loading was observed in CAD/CAM abutments. The correlation among the axial displacement, the RTV, and the tensile removal force was not significant. CONCLUSION. The use of CAD/CAM abutment did not significantly affect the amount of axial displacement and tensile removal force, but presented a significantly greater removal torque reduction% than prefabricated abutments. The connection stability due to the friction at the abutment-implant interface of CAD/CAM abutments may not be different from prefabricated abutment.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.108-115
• /
• 2013

This study was conducted to suggest a model to calculate the overall heat transfer coefficient of single layer covering for various greenhouse conditions. There was a strong correlation between cover surface temperature and inside air temperature of greenhouse. The equations to calculate the convective and radiative heat transfer coefficients proposed by Kittas were best fitted for calculation of the overall heat transfer coefficient. Because the coefficient of linear regression between the calculated and measured cover surface temperature was founded to 0.98, the slope of the straight line is 1.009 and the intercept is 0.001, the calculation model of overall heat transfer coefficient proposed by this study is acceptable. The convective heat transfer between the inner cover surface and the inside air was greater than the radiative heat transfer, and the difference increased as the wind speed rose. The convective heat transfer between the outer cover surface and the outside air was less than the radiative heat transfer for the low wind speed, but greater than for the high wind speed. The outer cover convective heat flux increased proportion to the inner cover convective heat flux linearly. The overall heat transfer coefficient increased but the cover surface temperature decreased as the wind speed increased, and the regression function was founded to be logarithmic and power function, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.5
• /
• pp.391-400
• /
• 2017

Italian ryegrass (IRG) is one of the fastest growing grasses available to farmers. It offers rapid establishment and starts growing early in the following spring and has fast regrowth after defoliation. So, IRG can be utilized as the dominant/single species of grass used in a farming system, or to play a role as a large producing pasture and sacrificial paddock. The objective of this study was to develop the use of unmanned aerial vehicle (UAV) for the evaluation of feed value of IRG. For this study, UAV imagery was taken on the Nonsan regions two times during the IRG growing season. We analyzed the relationships between $NDVI_{UAV}$ and feed value parameters such as fresh matter yield, dry matter yield, acid detergent fiber (ADF), neutral detergent fiber (NDF), total digestible nutrient (TDN) and crude protein at the season of harvest. Correlation analysis between $NDVI_{UAV}$ and feed value parameters of IRG revealed that $NDVI_{UAV}$ correlated well with crude protein (r = 0.745), and fresh matter yield (r = 0.655). According to the relationship, the variation of $NDVI_{UAV}$ was significant to interpret feed value parameters of IRG. Eight different regression models such as Linear, Logarithmic, Inverse, Quadratic, Cubic, Power, S, and Exponential model were used to estimate IRG feed value parameters. The S and exponential model provided more accurate results to predict fresh matter yield and crude protein than other models based on coefficient of determination, p- and F-value. The spatial distribution map of feed values in IRG plot was in strong agreement with the field measurements in terms of geographical variation and relative numerical values when $NDVI_{UAV}$ was applied to regression equation. These lead to the result that the characteristics of variations in feed value of IRG according to $NDVI_{UAV}$ were well reflected in the model.