• 한국음향학회지
• /
• 제22권3호
• /
• pp.194-201
• /
• 2003

음성인식에서 신뢰도 측정이란 인식된 결과에 대한 신뢰 여부를 결정하는 것이다. 신뢰도는 프레임을 음소 및 단어 수준으로 통합하여 측정된다. 단어 인식의 경우, 신뢰도를 이용하여 인식 결과와 미등록 어휘를 검증한다. 따라서 이러한 후처리를 통해 이를 인식 결과로 승인하지 않음으로써 성능을 높일 수 있다. 본 논문에서는 기존의 신뢰도 측정 방법인 로그 유사도 비를 수정하여 신뢰도를 측정하였다. 제안된 방법은 프레임 수준에서 음소 수준으로 신뢰도를 통합할 때 로그 유사도 비가 음수인 것만을 누적하는 것이다. 단어 인식기의 인식 결과에 대한 검증 성능을 기존의 방법과 비교한 결과, CAR (Correct Acceptance Ratio)이 90%인 지점에서 FAR (False Acceptance Ratio)을 미등록 어휘에 대해서는 약 3.49%, 오인식에 대해서는 15.25% 감소시킬 수 있었다

• 대한치과보철학회지
• /
• 제26권1호
• /
• pp.31-49
• /
• 1988

This study was performed to investigate the sound distortion following the alternation of the palatal plate thickness, for this study, 3 subjects who were born in Seoul and spoke Seoul dialect were recruited from K university male student population. First, their sounds of /아(a)/, 어(e)/, 오(o)/, 우(u)/, 으($\.{+}$), 이(i)/,에(e)/ without inserting plate were recorded , and then the sounds with palatal plates of different thickness were recorded, respectively. The palatal plates was constructed to cover the alveolar & palatal surfaces of the maxilla with an approximate thickness of 1.0mm, 2.5mm, and thickness of 2.5mm over the alveolar ridge & 1.0mm elsewhere and, named B, C, D-type, in succession. Series of analysis were administered through Computer (16 bit IBM PC/AT) at analyze the sound distortions. These experiments were analyzed by the LPC, Log Area Ratio. The findings led to the following conclusions: 1. Sound distortions were relatively minute in each condition and informations, however, /이(i)/ was the most distorted vowel in all conditions. 2. By and large, sound distortion was large in C, D-types. However, there was no correlation of the distortion rate on the 3 informants, and all tested vowels. 3. It was similar to LPC, Log Area Ratio distortion rates. 4. It was found that the sound distortion wit]1 plate inserted was verified to the numeric value with LPC and Log Area Ratio method.

• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.145-152
• /
• 2000

X-ray diffraction method detects change of crystal lattice distance under material surface using diffraction angle 2$\theta$. This technique can be applied to the behavior on slip band and micro crack due to material degradation. The relation between half-value breadth and number of cycle has three stages which constitute rapid decrease in initial number of cycles, slight decrease in middle number of cycles and rapid decrease in final number of cycles. The ratio of half-value breadth takes a constant value on B/B$_{0}$-N diagram with loading condition except early part of fatigue life. The ratio of half-value breadth B/B$_{0}$ with respect to number of cycle to failure N$_{f}$ has linear behavior on B/B$_{0}$-log N$_{f}$ diagram. Therefore, in this paper the estimation of fatigue life by average gradient method has much less estimated mean error than the estimation of fatigue life by log B/B$_{0}$-log N/N$_{f}$ relation.elation.ation.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권2호
• /
• pp.78-86
• /
• 2002

In general, X-ray diffraction method detects the changes of crystal lattice under material surface using the angle of diffraction 2$\theta$. This technique which deals with in the presented paper can be applied to a behavior on the slipped band or the micro crack cause to material degradation. The relation between half-value breadth and cycle numbers shows three stages, which consist of rapid decrease in the initial cycle, slight decrease in the middle cycle, and then rapid decrease in the final cycle. The ratio of half-value breadth has a constant value on B/B$\_$0/ - N diagram under the loading condition except early part of fatigue life. The ratio of half-value breadth B/B$\_$0/ - log N$\_$f/ with respect to number of cycle to failure N$\_$f/ has linear behavior on B/B$\_$0/ - log N$\_$f/ diagram. Therefore, the evaluation of fatigue life by the average gradient has much less mean error than the estimation of fatigue life by log B/B$\_$0/ - log N/N$\_$f/ relation.

• 한국통신학회논문지
• /
• 제32권3C호
• /
• pp.216-225
• /
• 2007

본 논문에서는 대표적인 반복 부호 알고리즘인 터보 부호, LDPC부호 TPC 등 세 가지 알고리즘에 대해 8PSK 이상의 다치 변조 방식 적용을 위해 수신단에서 비트 분리 방법을 제시한다. 수신된 I, Q 심볼만을 이용하여 세 비트 이상의 비트를 분리하기 위한 LLR 방식에 기초를 하여 LLR 방식의 단점인 복잡도를 개선하기 위해 Euclidean, MAX, Sector 방식을 제시하였으며, 세 가지 반복 부호에 대해 최적의 비트 분리 방법을 제시하였다.

• 말소리와 음성과학
• /
• 제1권1호
• /
• pp.55-62
• /
• 2009

This paper proposes an improved method to verify a keyword segment that results from a word spotting system. First a baseline word spotting system is implemented. In order to improve performance of the word spotting systems, we use a two-pass structure which consists of a word spotting system and an utterance verification system. Using the basic likelihood ratio test (LRT) based utterance verification system to verify the keywords, there have been certain problems which lead to performance degradation. So, we propose a method which uses phone-level log-likelihood ratios (PLLR) patterns in computing confidence measures for each keyword. The proposed method generates weights according to the PLLR patterns and assigns different weights to each phone in the process of generating confidence measures for the keywords. This proposed method has shown to be more appropriate to word spotting systems and we can achieve improvement in final word spotting accuracy.

• Journal of Pharmaceutical Investigation
• /
• 제35권4호
• /
• pp.287-293
• /
• 2005

The purpose of the present study was to evaluate the bioequivalence of two glimepiride tablets, Amaryl tablet (Handok & Aventis Korea, reference drug) and Mepiril tablet (Myungmoon Pharm. Co., Ltd., Korea, test drug), according to the guidelines of Korea Food and Drug Administration (KFDA). After adding an internal standard (glibenclamide) to human plasma, plasma samples were extracted using 1mL of methyl tertiary butyl ether. Compounds extracted were analyzed by reverse-phase HPLC with multiple reaction monitoring (MRM) mode analyte detection. This method for determination glimepiride proved accurate and reproducible, with a limit of quantitation of 2 ng/mL in human plasma. Twenty-four healthy male Korean volunteers received each medicine at the glimepiride dose of 2 mg in a $2{\times}2$ crossover study. There was a one-week washout period between the doses. Plasma concentrations of glimepiride were monitored by a LC-MS/MS for over a period of 12 hr after the administration. $AUC_t$ (the area under the plasma concentration-time curve from time zero to 12 hr) was calculated by the linear trapezoidal rule method. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{max}$) were compiled from the plasma concentration-time data. Analysis of variance was carried out using logarithmically transformed $AUC_t$ and $C_{max}$. No significant sequence effect was found for all of the bioavailability parameters indicating that the crossover design was properly performed. The 90% confidence intervals of the $AUC_t$ ratio and the $C_{max}$ ratio for Amaryl/Mepiril were log 0.9583-log 1.1357 and log 1.0570-log 1.2376, respectively. These values were within the acceptable bioequivalence intervals of log 0.80-log 1.25. Taken together, our study demonstrated the bioequivalence of Amaryl and Mepiril with respect to the rate and extent of absorption.

• 한국방재학회 논문집
• /
• 제9권3호
• /
• pp.127-133
• /
• 2009

본 연구에서는 다변량 Monte Carlo 기법을 이용하여 무차원 누가강우량 곡선을 생성하였다. 이를 위해 30년 이상의 관측년수를 갖는 강우자료를 활용하여 강우사상을 분리하고 이를 무차원화하여 강우의 지역적, 시간적 변동성을 제거하였다. 그리고 이들 무차원화된 누가강우량곡선을 4가지 형태로 구분하여 강우자료 특성을 반영한 누가강우량 곡선을 생성하였다. 무차원 누가 강우량 곡선의 절점이 항상 0이상이고 전체의 합이 1이 되어야 하는 제약조건을 극복하기 위해 log-ratio 기법을 도입하였고 Monte Carlo 기법을 이용한 다변량 생성시 요구되는 정규화와 상관계수 반영의 문제점을 Johnson 시스템과 직교변환을 도입하여 모형에 적용함으로서 제약조건을 극복할 수 있었다. 본 연구에서 적용한 다변량 Monte Carlo 기법을 이용한 강우변동생성기법은 실제 강우량 자료의 특성을 가공없이 반영할 수 있어 해당 유역의 특성을 정확히 반영할 수 있었고 유역의 홍수대책 수립, 수공구조물 설계 및 분석 등 활용성이 매우 클 것으로 판단된다.

• Smart Structures and Systems
• /
• 제16권1호
• /
• pp.163-181
• /
• 2015

This research investigates the structural health monitoring of nonlinear structures after a major seismic event. It considers the identification of flag-shaped or pinched hysteresis behavior in response to structures as a more general case of a normal hysteresis curve without pinching. The method is based on the overall least squares methods and the log likelihood ratio test. In particular, the structural response is divided into different loading and unloading sub-half cycles. The overall least squares analysis is first implemented to obtain the minimum residual mean square estimates of structural parameters for each sub-half cycle with the number of segments assumed. The log likelihood ratio test is used to assess the likelihood of these nonlinear segments being true representations in the presence of noise and model error. The resulting regression coefficients for identified segmented regression models are finally used to obtain stiffness, yielding deformation and energy dissipation parameters. The performance of the method is illustrated using a single degree of freedom system and a suite of 20 earthquake records. RMS noise of 5%, 10%, 15% and 20% is added to the response data to assess the robustness of the identification routine. The proposed method is computationally efficient and accurate in identifying the damage parameters within 10% average of the known values even with 20% added noise. The method requires no user input and could thus be automated and performed in real-time for each sub-half cycle, with results available effectively immediately after an event as well as during an event, if required.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1141-1146
• /
• 2009

The compressibility of clay has been expressed e-log p' graph. In natural clay, e-log p' graph are changed by deposition condition and chemical cementation as well as Atterberg limits, whereas in reconstituted clay, it is generally known that e-log p’ curve is varied with Atterberg limits. However, e-log p' graph is possible to change according to the reconstituting methods and test conditions. In this study, consolidation tests are performed as various test condition for reconstituted Busan clay. Test results show that the relationship e/$e_L$ and log p' is almost constant with $e_L$. And the compression index obtained from slurry method sample is larger than one obtained from kneading method sample. Intrinsic compression line (ICL) of Busan clay is identical with ICL suggested by Burland.