• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.64.2-64.2
• /
• 2013

Korea Astnonomy and Space Science Institute (KASI) operates two solar radio observing facilities, the Korean station of the e-CALLISTO and the Korean Solar Radio Burst Locator (KSRBL). The e-CALLISTO station had suffered from tracking problem for past several years. Since 2011, KASI has developed a new tracking system, and recently the antenna has regained the its sun-tracking capability and full day-time coverage. The KSRBL also suffered from the control computer breakdown last year. After one year of operational gap, the KSRBL restored its normal daily observation. We also expanded the data server storage capacity, to store the full original data of 25 ms integration time and 0.25 MHz frequency resolution, amounting to about 80 GB per day.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.11
• /
• pp.17-26
• /
• 1993

In this paper, a VlSI architecture for Reed-Solomon (RS) decoder based on the Berlekamp algorithm is proposed. The proposed decoder provided both erasure and error correcting capability. In order to reduc the chip area, we reformulate the Berlekamp algorithm. The proposed algorithm possesses a recursive structure so that the number of cells for computing the errata locator polynomial can be reduced. Moreover, in our approach, only one finite field multiplication per clock cycle is required for implementation, provided an improvement in the decoding speed, and the overall architecture features parallel and pipelined structure, making a real time decoding possible. From the performance evaluation, it is concluded that the proposed VLSI architecture is more efficient in terms of VLSI implementation than the rcursive architecture based on the Euclid algorithm.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.387-389
• /
• 1998

For the continuous and exact measurement of load impedance of AC power system on the electric railway, this paper presents a method to show the load area to resistance(R)-reactance(X) plane of impedance plane. The load area is presented in terms of impedance which is in the ratio of voltage and current continuously measured and impedance plane indicates the protection area of fault locator. The proposed method is verified its reasonability by computer simulation, and using this method we will develop the power system impedance analyser which is available actual application.

• Electronics and Telecommunications Trends
• /
• v.12 no.4 s.46
• /
• pp.39-51
• /
• 1997

WWW(World Wide Web)은 인터넷상에 광범위하게 분산된 다양한 형식의 데이터를 손쉽게 검색할 수 있으며, 모든 응용의 사용자 환경을 손쉽게 포함시킴으로써 새로운 미디어 타입의 통합을 위한 가장 성공적인 기술로 평가받고 있다. 1990년 처음 개발될 당시 WWW은 텍스트 기반의 구조에 맞추어 HTTP(Hyper Text Transfer Protocol), HTML (Hyper Text Markup Language), URL(Uniform Resource Locator)이 제안되어, 이를 통해 비동기적인 형태의 검색과 상호작용을 지원하도록 설계되었다. 반면, 최근 인터넷상의 상당수를 차지하는 오디오, 비디오와 같은 실시간 환경의 멀티미디어 데이터들은 연속적, 동기적이며, 대화형 특징을 포함하고 있어 WWW에서 이러한 미디어들을 통합하기 위해서는 구조적인 확장이 요구된다. 본 고에서는 실시간 오디오/비디오를 웹상에서 통합시키기 위한 기술들은 분석한다. 인터넷 실시간 멀티미디어 데이터를 WWW에서 처리하기 위한 현재의 기술과 문제점들을 소개하고, 이를 해결하기 위해 WWW 기본 구조의 확장과 기술적인 해결책들을 제안한다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.2
• /
• pp.167-174
• /
• 1996

In this paper, a fault location algorithm is presented, which uses novel signal processing techniques and takes a new paradigm to overcome some drawbacks of the conventional methods. This new method for fault location on electric power transmission lines uses only one-terminal fault signals. The main feature of the method is hat it uses the high frequency components in fault signal and considers the influence of the source network by using a traveling wave propagation characteristics. As a result, we can develop a high speed, good accuracy fault locator.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.181-185
• /
• 2008

Recently, location based service(LBS) expended based on personal specialized service, however since commercialized GPS based emergency rescue service comes with shadow zone for GPS signal such as inside building, the accuracy and reliability are not guaranteed. Therefore to improve such problem, we propose an active location detecting algorithm using RFID-TAG and Yagiantenna. To track the location of RFID-TAG where signal is generated, location tracking device in which Yagi-Antenna is installed moves around. Since directed wave and reflected wave co-exist during signal reception, final signal generated location is searched by setting up multiple of locations where signal can be generated on the map and moving location tracking device along minimum length of path. The algorithm proposed in this paper was verified of its technical validity through simulator.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1385-1388
• /
• 2004

정보통신의 발전으로 디지털 콘텐츠에 대한 서비스 방식이 위치정보를 가지고 서비스하는 URL(Uniform Resource Locator)방식의 문제점과 기존의 물리적인 저작물이 디지털 콘텐츠로 전환되면서 기존의 식별자로는 디지털 콘텐츠의 특성을 충족시키는 식별이 미흡하고 한계가 있다. 또한, 학술지 위주의 식별자는 연구가 활발하나 비학술지에 대한 식별자 연구는 부족한 실정이다. 따라서, 해외 주요 디지털 콘텐츠 서비스기관의 식별체계 활용사례를 분석하고 그 결과를 토대로 한국과학기술정보연구원(KISTI) 고유 식별자인 KOI(Kisti Object Identifier)를 개발하였다.

• Journal of Korean Dental Science
• /
• v.15 no.2
• /
• pp.147-151
• /
• 2022

Horizontal root fracture (HRF) is a result of trauma to teeth and periodontium, which implies severe injury to cementum, dentin, and pulp. This is a rare case of HRF in the maxillary lateral incisor of a 62-year-old male who only presented persistent gingival swelling, fistula, and dull pain at first. An apical radiolucency of unknown origin turned out to be a result of hidden HRF at the coronal third level that was later visualized radiographically during endodontic treatment. The tooth was scheduled to be extracted upon the patient's agreement. The purpose of this report is to alert clinicians about the importance of diagnosing HRF through thorough clinical and radiographic examinations. Where there is persistent fistula without proper cause, HRF should be considered as a causative factor, and the diagnosis could be effective with aid of cone beam computed tomography, electronic root apex locator, as well as other clinical signs.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.2
• /
• pp.435-459
• /
• 1998

In order to achieve a successful endodontic treatment, root canals must be obturated three-dimensionally without causing any damage to apical tissues. Accurate length determination of the root canal is critical in this case. For this reason, I've used the conventional periapical radiography, Digora/sup (R)/(digital imaging system) and Root ZX/sup (R)/(the frequency dependent type apex locator) to measure the length of the canal and compare it with the true length obtained by cutting the tooth in half and measuring the length between the occlusal surface and the apical foramen. From the information obtained by these measurements, I was able to evaluate the accuracy and clinical usefulness of each systems. whether the thickness of files used in endodontic therapy has any effect on the measuring systems was also evaluated in an effort to simplify the treatment planning phase of endodontic treatment. 29 canals of 29 sound premolars were measured with #15, #20, #25 files by 3 different dentists each using the periapical radiography. Digora/sup (R)/ and Root ZX/sup (R)/. The measurements were then compared with the true length. The results were as follows: 1. In comparing mean discrepancies between measurements obtained by using periapical radiography(mean error: -0.449±0.444 mm), Digora/sup (R)/(mean error: -0.417±0.415 mm) and Root ZX/sup (R)/(mean error: 0.123±0.458 mm) with true length. periapical radiography and Digora/sup (R)/ system had statistically significant differences(p<0.05) in most cases while Root ZX/sup (R)/ showed none(p>0.05). 2. By subtracting values obtained by using periapical radiography, Digora/sup (R)/ and Root ZX/sup (R)/ from the true length and making a distribution table of their absolute values. the following analysis was possible. In the case of periapical film. 140 out of 261<53.6％) were clinically acceptable satisfying the margin of error of less than 0.5 mm. 151 out of 261 (53,6％) were acceptable in the Digora/sup (R)/ system while Root ZX/sup (R)/ had 197 out of 261(75.5％) within the limits of 0.5mm margin of error. 3. In determining whether the thickness of files has any effect on measuring methoths, no statistically significant differences were found(p>0.05). 4. In comparing data obtained from these methods in order to evaluate the difference among measuring methods, there was no statistically significant difference between periapical radiography and Digora/sup (R)/ system(p>0.05), but there was statistically significant difference between Root ZX/sup (R)/ and periapical radiography(p<0.05). Also there was statistically significant difference between Root ZX/sup (R)/ and Digora/sup (R)/ system(p<0.05). In conclusion, Root ZX/sup (R)/ was more accurate when compared with the Digora/sup (R)/ system and periapical radiography and seems to be more effective clinically in determining root canal length. But Root ZX/sup (R)/ has its limits in determining root morphology and number of roots and its accuracy becomes questionable when apical foramen is open due to unknown reasons. Therefore the combined use of Root ZX/sup (R)/ and the periapical radiography are mandatory. Digora/sup (R)/ system seems to be more effective when periapical radiographs are needed in a short period of time because of its short processing time and less exposure.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.375-390
• /
• 2009

Statement of problem: Implant supported overdenture is accepted widely as a way to restore edentulous ridge providing better retention and support of dentures. Various types of attachment for overdenture have been developed. Purpose: The purpose of this study was to investigate the influence of attachment type in implant overdentures on the biomechanical stress distribution in the surrounding bone, prosthesis and interface between implant and bone. Material and methods: Finite element analysis method was used. Average CT image of mandibular body(Digital $Korea^{(R)}$, KISTI, Korea) was used to produce a mandibular model. Overdentures were placed instead of mandibular teeth and 2mm of mucosa was inserted between the overdenture and mandible. Two implants($USII^{(R)}$, Osstem, Korea) were placed at both cuspid area and 4 types of overdenture were fabricated ; ball and socket, Locator, magnet and bar type. Load was applied on the from second premolar to second molar tooth area. 6 times of finite element analyses were performed according to the direction of the force $90^{\circ}$, $45^{\circ}$, $0^{\circ}$ and unilateral or bilateral force applied. The stress at interface between implants and bone, and prosthesis and the bone around implants ware compared using von Mises stress. The results were explained with color coded graphs based on the equivalent stress to distinguish the force distribution pattern and the site of maximum stress concentration. Results: Unilateral loading showed that connection area between implant fixture and bar generated maximum stress in bar type overdentures. Bar type produced 100 Mpa which means the most among 4 types of attachments. Bilateral loading, however, showed that bar type was more stable than other implants(magnet, ball and socket). 26 Mpa of bar type was about a half of other types on overdenture under $90^{\circ}$ bilateral loading. Conclusions: In any directions of stress, bar type was proved to be the most vulnerable type in both implants and overdentures. Interface stress did not show any significant difference in stress distribution pattern.