• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.111-116
• /
• 2012

In this paper, we fabricate a WiFi based video transmitting equipment and establish a video transmitting system for realtime transmitting of accident scene on expressways. The transmitting equipment is based on the H.264 video codec and embed WiFi module. The transmitting equipment can transmit video and also meta data such as location positioning through the Wibro network using a Wibro terminal. From test results, it is clear that high density videos were transmitted while the vehicle carried by the video equipment was traveling with velocity of 80 km/h.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.2
• /
• pp.32-42
• /
• 1995

When the thickness becomes so small as in the case of the trailing edge of the propeller blade or when the curvature of the surface varies rapidly as in ship stem, the existing panel method employing a flat-surface panel, obtained by collapsing the original non-planar surface into its mean location, suffers the leakage problem and also gives inaccurate induction upon the field point very close to the panel. The hyperboloidal panel deals with the induction from the dipole distributed on the non-planar surface without approximation, overcoming the defects of the flat-surface panel. This paper introduces two distinct derivations of the formulae to compute the integral for the potential induced by a dipole of uniform density distributed on a non-planar hyperboloidal surface element. One method is based on the Gauss-Bonnet theorem and the other is based on the transformation of the surface integral into a line integral.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.3
• /
• pp.151-160
• /
• 2018

NAND flash memories have the advantages of fast access speed, high density and low power consumption, thus they have increasing demand in embedded system and mobile environment. Despite the low power and fast speed gains of NAND flash memory, DRAM disk buffers were used because of the performance load and limited durability of NAND flash cell. However, DRAM disk buffers are not suitable for limited energy environments due to their high static energy consumption. In this paper, we propose WAP-LRU (Write pattern Analysis based Placement by LRU) hybrid disk buffer management policy. Our policy designates the buffer location in the hybrid memory by analyzing write pattern of the workloads to check the continuity of the page operations. In our simulation, WAP-LRU increased the lifetime of NAND flash memory by reducing the number of garbage collections by 63.1% on average. In addition, energy consumption is reduced by an average of 53.4% compared to DRAM disk buffers.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.352-361
• /
• 2018

This paper proposes a sensing system of the Halbach array permanent magnet spherical motor(PMSM). The rotor position can be obtained by solving three rotation angles, which revolves around 3 reference axes of the stator. With the development of 3-D hall sensor, the position identification problem of the Halbach array PMSM based on rotor magnetic field is studied in this paper. A nonlinear and serious coupling relationship between the rotation angles and the measured magnetic flux density is established on the basis of the rotation transformation theory and the magnetic field model. In order to get rid of the influence on position detection caused by the harmonics of rotor magnetic field and the stator coil magnetic field, a sensor location combination scheme is proposed. In order to solve the nonlinear equation fast and accurately, a new position solution algorithm which combines the merits of gradient projection and particle swarm optimization(PSO) is presented. Then the rotation angles are obtained and the rotor position is identified. The validity of the sensing system is verified through the simulation.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.3
• /
• pp.346-350
• /
• 2010

Since sensor nodes have restriction of using resources in Zigbee network, number of study on improving efficiency is currently ongoing[1]. Clustering mechanism based on hierarchy structure provides a prevention of duplicated information and a facility of a network expansion[2]. however overheads can occurs when the cluster header is elected and the election of a incorrect cluster header causes to use resources inefficiently. In this paper, we propose that the cluster header election mechanism using distances between nodes and density of nodes in accordance with the operation of the central processing system in which the sync nodes are having information of location and energy with respect to general nodes based on hierachy clustering mechanism.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.2
• /
• pp.41-46
• /
• 2015

The demand on low power and high performance system is soaring due to the extending of mobile and small electronic device market. The 3D die-stacking technology is widely studying for next generation integration technology due to its high density and low access time. We proposed the 3D die-stacked DRAM including a reconfigurable accelerator in a logic layer of DRAM. Also we discuss and suggest a cache-based local memory for a reconfigurable accelerator in a logic layer. The reconfigurable accelerator in logic layer of 3D die-stacked DRAM reduces the overhead of data management and transfer due to the characteristics of its location, so that can increase the performance highly. The proposed system archives 24.8 speedup in maximum.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.11
• /
• pp.91-96
• /
• 2014

Since the sensors of Internet of Things (IOT) collect various data, the lifetime of sensor network is very important and the data should be aggregated efficiently. The contiguous collection by the certain sensors occurs an excessive battery consumption and successive transmission of same value of data should be avoided. To solve these things, we propose an weight-based cluster head replacement method that divides whole network into several grids and cluster head is selected by remaining energy, density of alive sensors and location of sensor. The aim of algorithm maximizes the lifetime of network. Our simulation results shows that the proposed method is very simple as well as balances energy consumption.

• Corrosion Science and Technology
• /
• v.17 no.6
• /
• pp.292-300
• /
• 2018

The modeling of 3D finite elements based on CAD data has been used to detect sites of corrosion defects in buried pipes. The results generated sophisticated profiles of electrolytic potential and vectors of current distributions on the earth surface. To identify the location of defects in buried pipes, the current distribution on the earth surface was projected to a plane of incidence that was identical to the pipe locations. The locations of minimum electrolytic potential value were found. The results show adequate match between the locations of real and expected defects based on modeling. In addition, the defect size can be calculated by integrating the current density curve. The results show that the defect sizes were $0.74m^2$ and $0.69m^2$, respectively. This technology may represent a breakthrough in the detection of indirect damage in various cases involving multiple defects in size and shape, complex/cross pipe systems, multiple anodes and stray current.

• Structural Monitoring and Maintenance
• /
• v.9 no.1
• /
• pp.59-80
• /
• 2022

In the present study, the objective is to detect the structural damages using the responses obtained from the sensors at the optimal location under uncertainty conditions. Reducing the error rate in damage detection process due to responses' noise is an important goal in this study. In the proposed algorithm for optimal sensor placement, the noise of responses recorded from the sensors is initially reduced using the principal component analysis. Afterward, the optimal sensor placement is obtained by the damage detection equation based sensitivity analysis. The sensors are placed on degrees of freedom corresponding to the minimum error rate in structural damage detection through this procedure. The efficiency of the proposed method is studied on a truss bridge, a space dome, a double-layer grid as well as a three-story experimental frame structure and the results are compared. Moreover, the performance of the suggested method is compared with three other algorithms of Average Driving Point Residue (ADPR), Effective Independence (EI) method, and a mass weighting version of EI. In the examples, young's modulus, density, and cross-sectional areas of the elements are considered as uncertainty parameters. Ultimately, the results have demonstrated that the presented algorithm under uncertainty conditions represents a high accuracy to obtain the optimal sensor placement in the structures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.490-499
• /
• 2017

In recent years, the introduction of complex systems analysis based on various variables has become more active in order to identify and analyze complex problems of Modern Society. Prediction of patients' spatial perception and usability according to the spatial arrangement of the outpatient department is a very important factor for providing high quality hospital service. For objective analysis, the standard program procedure and analysis index for the diseases of the elderly were prepared and the uniformity of the atmospheric space was evaluated through heat map analysis and quantitative analysis. In this study, 73 cells were installed and simulated to analyze the uniformity of the four alternatives according to the change of the arrangement of the medical care space, receiving space, and consultation space using the complex system analysis method for the nursing hospitals. The resulting density was derived. The results are as follows. 1)The layout of the reception space has the greatest influence on the total spatial density of the waiting space. 2) The uniformity of the waiting space can be increased by separating the examination space and the examination space. 3)The closer the location of the receiving space is from the entrance, the greater the density of the waiting space. Finally, this study applied discrete event simulation to the evaluation of uniformity of atmosphere space, and proved that the actor - based model can be utilized for utilization and evaluation as spatial analysis methodology.