• Journal of Platform Technology
• /
• v.10 no.1
• /
• pp.3-10
• /
• 2022

In high-risk workplaces where communication is not possible, such as deforestation, it is necessary to use equipment that monitors the worker's situation in real time and obtains information according to the worker's location in case of an emergency. This paper analyzes the development and demonstration experiments of smart hard hats for deforestation workers to maintain a safe working environment. The developed smart helmet identifies the location of the worker based on the UWB signal for location estimation, and it is necessary to keep the distance between the workers not too close. UWB, Gyro, and LoRa are used to communicate even in the communication shadow area. It is used to provide a safe working environment such as improved construction to reduce worker risks and risks in forest working environments.

• Journal of Korean Association for Spatial Structures
• /
• v.23 no.3
• /
• pp.71-78
• /
• 2023

Recently, Free-Form and Irregular Shape high-rise buildings are constructed by IT technology development. Tilted shaped high-rise building which is one of Irregular shape high-rise buildings can cause lateral displacement by gravity load and lateral load due to tilted elevation shape. Therefore, it is necessary to review the behavior and structural aspects of the Tilted shape high-rise building by gravity load. In this paper, the dynamic characteristics of a tilted structure with a dual-core were analyzed with the core location as a design variable, and response behavior, vulnerable members, and vulnerable layers to earthquake loads were analyzed. As a result of the analysis, as the location of the core moved in an tilted direction, the eccentric distance and eccentric load decreased, reducing the axial force of the vertical members. However, the location of the core had little effect on the response.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.490-491
• /
• 2021

Recently, technologies using Wi-Fi fingerprints and deep learning are being studied to provide accurate location-based services in an indoor environment. At this time, the composition of learning data is very important, and it is essential to collect sufficient data necessary for learning. However, the number of specific points for the collection of radio signal data within the area requiring positioning is infinite, and it is impossible to collect all of these data. Therefore, there is a need for a way to make up for insufficient learning data. This study proposes a method of constructing a sufficient number of location data necessary for learning based on insufficiently collected location data.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.16-23
• /
• 2010

In this paper, we propose an efficient estimation algorithm to find unknown location of an earth station for a geostationary satellite system. A cross ambiguity function (CAF), using time difference of arrival (TDOA) and frequency difference arrival (FDOA), is usually used to estimate the unknown location of an unauthorized earth station which may invoke interference to the existing satellite systems. However, a practical estimation of the location data requires tremendous computational time of CAF, and this prohibits direct utilization of CAF. For this reason, we propose a computationally efficient algorithm which utilizes characteristics of TDOA and FDOA within CAF. The proposed algorithm greatly enhances the computational efficiency without any performance degradation. In addition, we demonstrate the simulation results on the estimation performance by the resolution of the CAF estimation. The results provided in this paper will be utilized at the real system implementation.

• Journal of Korea Spatial Information System Society
• /
• v.5 no.1 s.9
• /
• pp.13-25
• /
• 2003

The advent of LBS is caused by mobility advantage of wireless internet. The mobility has the information such as location which is based on LBS(Location based Services). It comes out as a killer application for wireless internet when market of wireless internet is diffused. In this paper, we build up the technical model and survey the requirement of technologies related LBS expanded as wireless internet services rapidly. First, we construct the conceptual model for LBS based on functions of LBS and characteristics of foreign models. This model is consisted of generalized components of LBS and can be used as a basic model to survey the requirement of each technologies. Second, we survey the demand of each technology for LBS. Then we analyze the importance of technologies for LBS to prepare developing various LBS. From this research, we can introduce proper plans and policy for LBS to develop technology stepwise, to promote industry activities and how to make up the foundation for LBS by government.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.3
• /
• pp.42-52
• /
• 1990

In this study, thick 24mm glulams were composed of thick. 3, 4, 6, 8mm Larch laminas to study that the theoretical analysis and the experimental analysis regarding the location of neutral axis of the glulams were compared, and to study on the effect of location of neutral axis on mechanical properties of glulam. The variation of location of neutral axis after proportional limit(or elastical limit) was studied to offer basic data to make the better composition method of glulam. The result obtained can be summarized as follows: 1. The theoretical neutral axis was 0.547 in solid wood, and also 0.547 in glulams because glulams were composed of only Larch laminas. 2. In solid wood, the deviation of the theoretical and the experimental neutral axis location was 0.1%, But in glulams, the deviation from-12.2% to + 7.8% showed nonuniform pattern but no large deviation. Because laminas was only of Larch and so the mechanical properties of laminas were monotonous. 3. The neutral axis exerted no influance on the elasticity of glulam, which meaned that the maximum shear strength in the neutral axis showed no influance on elasticity limit. 4. The only minutely lower elasticities of glulam than that of solid wood were shown. This was because of influance of glue lines of glulam on the elasticlties. 5. The failure type of glulam was wholly simple tension failure and the horizontal shear failure near neutral axis was not taken place, which was that glue line was complete in bonding and the strength of the lamina was not various but uniform. 6. The ratio of tension strain($^{\varepsilon}t$) I compression strain($^{\varepsilon}c$) initially showed uniform level After the elasticity limit. the ratio was increased with the flow of time and so the tension strain was more increased than compression strain. So this proved tension lamination technique, which is that the mechanical properties of glulam could be improved, if the lamina of more superior strength would he added on the bottom side of the glulam.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.5
• /
• pp.439-444
• /
• 2016

This paper proposes the technique to protect the privacy of those who uses Smart Tourism Service based on location. The proposed privacy protection technique (1) generates a shared private key, OTK(One Time Key) without information exchanging Users with a Tourism Server and provides Users and a Tourism Server with message confidentiality by encrypting data with the key, (2) concatenates users' ID, login time(timestamp), and randomly-generated nonce, generates OTK by hashing with a hash function, encrypts users' location information and query by using the operation of OTK and XOR and provides Users and a Tourism Server with message confidentiality by sending the encrypted result. (3) protects a message replay attack by adding OTK and timestamp. Therefore, this paper not only provides data confidentiality and users' privacy protection but also guarantees the safety of location information and behavior pattern data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.56-62
• /
• 2017

As the need for 3D spatial information increases, many local governments and related industries are establishing map-based 3D spatial information services and offering them to users. In these services, positional accuracy is one of the most important factors determining their applicability to specific tasks. This study studied the location correction method between indoor and outdoor 3D spatial information through the construction of modeling data on a BIM/GIS platform. First, we selected the sites and processed the BIM/GIS data construction with 3 steps. When connecting the BIM model including indoor spatial data and 3D texturing model based on ortho images, mismatches occurred, so we proposed a location correction method. Using the conversion algorithm, the relative coordinate-based BIM data were converted to the absolute positions and then relocated by means of the texturing data on the BIM/GIS platform.

• Journal of Technology Innovation
• /
• v.17 no.1
• /
• pp.69-95
• /
• 2009

This paper examines the motives for location decisions of startups and dynamics of cluster growth. Because the location decision is intrinsically strategic choice by entrepreneurs, it is an interplay of three critical forces; cost-benefit of the choice, R&D ability of new entrants, and R&D capability of incumbents in clusters. The effect of knowledge spillovers influences the cluster growth like a double-edge sword; both a positive effect of technology learning and a negative effect of knowledge de-learning. Using data on 710 bio-tech venture firms in Korea, this paper tests the hypotheses about the factors influencing the growth of the cluster. The empirical analyses suggested that early entrepreneurial activity in the clustered regions were important, however other factors such as the organizational legacy, internal dynamics inside a cluster, and the existence of cooperation norm in the cluster, affected long term viability of the cluster.

• Spatial Information Research
• /
• v.21 no.1
• /
• pp.87-100
• /
• 2013

Recently, the use of locational information is growing rapidly. GPS technology has been adopted generally for obtaining locational information in outdoor spaces. In the other hand, the researches on indoor positioning have been carried out applying WLAN, RFID or Bluetooth technology because of the multi-path interference of GPS signal caused by the physical obstacles such as walls or columns in buildings. However, such technologies for indoor positioning cost too much to build sensing infrastructure and compute-intensive processes are involved. Furthermore, the accuracy of location estimation is variable caused by interior structures in buildings. In this study, to make up for the limitations, descriptive data such as phone number, unique room numbers, or business names readily available in mixed-use buildings is used for extracting location information. Furthermore, during the process, a geocoding method using character matching is applied to this study enabling prompt location estimation and sublating the fluctuation of accuracy caused by interior structures. Based on the proposed method in this study, an architecture is designed, and three-dimensional viewer program is developed for the implementation of this study. Also, this research is quantitatively analyzed through match rate and processing time of proposed method.