• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.381-385
• /
• 2007

As development of wireless communication technology has promoted mobility, Location Based Service (LBS) became embossed. The LBS is a service to recognize and utilize a location of a person or a thing through a device that ensures mobility based on wireless communication network. This paper thus researches on Healthcare Method to respond to emergency rapidly by recognizing a patient's location with the LBS. The LBS also provides location information of a user as well as remote management of organism data such as ECG data or pulse, which is transferred to a hospital or an emergency room.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.3
• /
• pp.300-307
• /
• 2008

Event source locating is very important to improving the power quality level. This paper presents a method to determine the relative location of the voltage sag source according to the cause. For this, the concept of the relative location of the source is defined first. Then, the main causes of voltage sag are classified and their characteristics are discussed. From these investigations, the rules to determine the relative location of event source are proposed for each type and the overall algorithm to identify the relative location and the kind of event source is presented. Finally, the proposed method is applied to the IEEE 13-bus test system and it is verified that the method can help to pinpoint the accurate location of the event source.

• Journal of Korea Multimedia Society
• /
• v.6 no.4
• /
• pp.601-609
• /
• 2003

In wireless mobile networks, the service area is partitioned into several registration areas (RAs). Every RA is associated with a mobility database called Visitor Location Register (VLR). The VLR is used to achieve the location management of the mobile terminals. When a mobile terminal enters a new RA, the VLR stores the current location information of the mobile terminal before serving any mobile services. At that time, if the VLR is full, the registration procedure fails, and the system can not deliver services to the mobile user under the existing cellular technology To resolve this problem, we propose a VLR overflow control scheme considering mobility of mobile users to accomodate incoming users during VLR overflow. The performance of the proposed scheme is evaluated by an analytic model in terms of costs for the location search and the location update, and compared with those of the overflow control scheme proposed by Lin[1].

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.2
• /
• pp.63-68
• /
• 2009

The location of mobile terminals in cellular networks is an important problem in the field of information technology with applications in resource allocation, location sensitive browsing, and emergency communications. Finding location estimation techniques that are robust to non-line of light (NLOS) propagation is a key problem in this area. Time of arrival (TOA) and pattern matching (PM) measurements can be made simultaneously by CDMA cellular networks at low cost. The different sources of errors for each measurement type cause TOA and PM measurements to contain independent information about mobile station (MS) locations. This paper combines the information of PM and TOA measurements to calculate a superior location estimate. The proposed location estimator is robust, provides lower error than the estimators based on the individual measurements, and has low implementation costs.

• Journal of Information Technology Services
• /
• v.9 no.4
• /
• pp.207-217
• /
• 2010

This paper is concerned with a protection system for the mentally handicapped, which is utilizing a GPS receiver and mobile communications. The protection system consists of a location notification equipment, a location identification and management server, and a cell phone of guardian. The location notification equipment is made up of a GPS receiver, a CDMA communication module and a microprocessor. The equipment transfers the location of the mentally impaired to the location identification and management server when the handicapped gets out of a certain bound of the designated facility. The server marks the handicapped's location on the map in the server and also notifies the guardian's cell phone of the locations. With applying the proposed protection system to social welfare organizations related to the mentally handicapped, it is expected to efficiently contribute to the promotion of the handicapped's welfare.

• Structural Engineering and Mechanics
• /
• v.46 no.1
• /
• pp.39-51
• /
• 2013

An extremum method is presented to predict the wrinkling characteristics of the inflated cone in bending. The wrinkling factor is firstly defined so as to obtain the wrinkling condition. The initial wrinkling location is then determined by searching the maximum of the wrinkling factor. The critical wrinkling load is finally obtained by determining the ratio of the wrinkling moment versus the initial wrinkling location. The extremum method is proposed based on the assumption of membrane material of beam wall, and it is extended to consider beam wall with thin-shell material in the end. The nondimensional analyses show that the initial wrinkling location is closely related to the taper ratio. When the taper ratio is higher than the critical value, the initial wrinkles will be initiated at a different location. The nondimensional critical wrinkling load nonlinearly increases as the taper ratio increases firstly, and then linearly increases after the critical taper ratio. The critical taper ratio reflects the highest load-carrying efficiency of the inflated cone in bending, and it can be regarded as a measure to optimize the geometry of the inflated cone. The comparative analysis shows fairly good agreement between analytical and numerical results. Over the whole range of the comparison, the mean differences are lower than 3%. This gives confidence to use extremum method for bending-wrinkling analysis of inflated conical cantilever beam.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.560-567
• /
• 2016

To solve the problem of parameter optimization in image sensor-based visible light positioning systems, theoretical limits for both the location and the azimuth angle of the image sensor receiver (ISR) are calculated. In the case of a typical indoor scenario, maximum likelihood estimations for both the location and the azimuth angle of the ISR are first deduced. The Cramer-Rao Lower Bound (CRLB) is then derived, under the condition that the observation values of the image points are affected by white Gaussian noise. For typical parameters of LEDs and image sensors, simulation results show that accurate estimates for both the location and azimuth angle can be achieved, with positioning errors usually on the order of centimeters and azimuth angle errors being less than $1^{\circ}$. The estimation accuracy depends on the focal length of the lens and on the pixel size and frame rate of the ISR, as well as on the number of transmitters used.

• Industrial Engineering and Management Systems
• /
• v.12 no.3
• /
• pp.190-197
• /
• 2013

People are living longer than ever before. As a result, life expectancy is going up and the demand of long-term care facilities is increasing in most countries. The facilities provide rehabilitative, restorative, and skilled nursing care to patients or residents in need of assistance with activities of daily living. This study deals with the capacitated location and allocation problem of long-term care facilities in a city that consists of a finite number of regions. Assuming that in each region candidate locations for three types of facilities are already given, two integer programming models are developed under the closest assignment rule reflecting the demand characteristics of the facilities. Both the location and type of the facilities to be built become decision variables. To show the validity of the models, numerical problems are solved with commercial software, CPLEX. Also, sensitivity studies were conducted to identify relationships between the system parameters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.579-580
• /
• 2016

In molds management systems using radio frequency identification (RFID), in the case where the RFID tag is lost, the RFID technology cannot be utilized to identify the location of the logistics. In order to solve this problem, a multi-sensor-based mold management system using RFID and infrared sensors is proposed in this paper. The proposed system uses RFID to identify the location of the mold and, by installing infrared sensors on the mold racks, the manager can identify the presence and location of the mold by reaffirming whether the mold exists in that location or not.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.248-257
• /
• 2014

As observed in the recent war, suppression of enemy air defense operation is one of the major tactics, simultaneously conducted with high payoff target. Specifically, our air defense operation should be properly constructed, since the operating environment of our forces mostly consists with mountainous terrain, which makes detections of the enemy difficult. The effective arrangements of low altitude air defense radars can be suggested as a way of improving the detection capability of our forces. In this paper, we consider the location problem of low altitude air defense radar, and formulate it as an Integer Programming. Specifically, we surveyed the previous researches on facility location problems and applied two particularly relevant models(MCLP, MEXCLP) to our problem. The terrain factor was represented as demand points in the models. We verified the optimal radar locations for operational situations through simulation model which depicts simple battle field. In the simulation model, the performance of optimal radar locations are measured by the enemy detection rate. With a series of experiments, we may conclude that when locating low altitude air defense radars, it is important to consider the detection probability of radar. We expect that this finding may be helpful to make a more effective air defense plan.