• 대한지리학회지
• /
• 제48권2호
• /
• pp.259-271
• /
• 2013

본 연구는 차세대 '정보 고속도로'로 각광받고 있는 슈퍼 와이파이 네트워크의 도입을 위한 효율적 시설물 배치에 대해 논의하고 있다. 슈퍼 와이파이는 기존 TV 방송의 유휴 주파수 대역인 화이트 스페이스를 활용함으로써 보다 넓은 지리적 서비스 범위를 가지기 때문에 인구 저밀도 지역이나 산간 지역에 대한 인터넷 접근성의 격차를 해소하는데 중요한 기능을 할 수 있다. 본 연구의 목적은 슈퍼 와이파이에 대한 체계적이고 효율적인 공간 계획을 탐색하는데 있으며, 이를 위해 전라남도 구례군을 대상으로 최적 입지 커버링 모델들을 적용하였다. 사례 분석 결과, 상이한 입지 모델(LSCP, MCLP)에 따른 최적화된 슈퍼 와이파이 입지 지점들을 도출할 수 있었으며, 시설물 수에 따른 커버리지 상쇄효과, 한계 커버리지와 같은 슈퍼 와이파이 네트워크 구축에 있어 유의미한 분석 결과들을 도출할 수 있었다. 본 연구의 결과는 향후 도시내 무선 네트워크의 확장이나 지역 무선 인프라 시설 구축에 슈퍼 와이파이를 도입하고자 하는 의사결정자에게 매우 유용한 참고 자료로 활용될 수 있을 것이다.

• 한국전통조경학회지
• /
• 제32권3호
• /
• pp.168-182
• /
• 2014

조선시대 서촌에서는 많은 성시원림들이 만들어졌고 그들 중 다수가 진경산수화로 그려졌었다. 본 연구는 먼저, 서촌의 대표적 원림들의 위치를 보다 실증적 기법에 의하여 규명하려 하였다. 조선조 진경산수화에 나타난 원림경관을 ArcGIS 3차원 지형 모델링과 비교함으로써 사실에 근접한 위치를 밝혀내고 이에 근거하여 지형과 경관의 특징을 해석하려 하였다. 원림추정지 주변의 지형을 3차원 지형모델로 작성한 후, 조망점을 이동시켜 진경산수도와 근접한 3D 모델의 구도에서 대상지의 위치를 찾아내었다. 이후 모형에 지적도를 중첩시켜 원림 터의 지번을 확인하였다. 그 결과의 해석은 다음과 같다. 서촌의 초기 원림인 '청풍계 원림'은 인왕산 계곡의 종단부에 위치하여 외부로부터 감추어진 '위요형 경관'을 보인다. 중기원림인 '청휘각 원림'은 옥류동 계곡과 능선 사이에 위치하여 외부로 보다 개방된 '반(半)개방형 경관'을 보인다. 후기원림인 '서원 원림'은 대상지 중 가장 높은 능선 상단에 위치하여 '조망형 경관'을 보인다. 말기원림인 '송석원 원림'은 능선과 시가지의 접점 언덕에 위치하여 '개방형 경관'을 보인다. 즉, 서촌원림의 경관과 사회적 기능은 함께 점진적으로 개방되어 온 것으로 나타난다.

• 한국BIM학회 논문집
• /
• 제6권1호
• /
• pp.1-8
• /
• 2016

This paper provides a method for generating flight path of Unmanned Aerial Vehicle (UAV) that is intended to be used in visual inspection of dome-type nuclear containment building. The method basically employs 3-D model to extract accurate location coordinates. Two basic route patterns that provide guide lines in defining moving locations were defined for each side wall and dome section of the containment. The route patterns support sequential capturing of images as well. In addition, several simple equations and an algorithm for calculation of the moving location on the route were developed on the basis of 3-D geometric characteristics of the containment building. A prototype computer program has been implemented to validate the proposed method, and a case study shows the method can visualize covering area in 3-D model as well.

• Communications for Statistical Applications and Methods
• /
• 제22권6호
• /
• pp.543-556
• /
• 2015

We present a survey of contributions that defined the nature and extent of robust statistics for the last 50 years. From the pioneering work of Tukey, Huber, and Hampel that focused on robust location parameter estimation, we presented various generalizations of these estimation procedures that cover a wide variety of models and data analysis methods. Among these extensions, we present linear models, clustered and dependent observations, times series data, binary and discrete data, models for spatial data, nonparametric methods, and forward search methods for outliers. We also present the current interest in robust statistics and conclude with suggestions on the possible future direction of this area for statistical science.

• Structural Engineering and Mechanics
• /
• 제66권4호
• /
• pp.439-444
• /
• 2018

This paper presents a numerical study on the behavior of continuous hollow steel beam strengthened using carbon fiber reinforced polymers (CFRP). Most previous studies on the CFRP strengthening of steel beams have been carried out on the steel beams with simple boundary conditions. No independent study, to the researcher's knowledge, has studied on the CFRP strengthening of square hollow section (SHS) continuous steel beam. However, this study explored the effect of the use of adhesively bonded CFRP flexible sheets on the behavior of the continuous SHS steel beams. Finite Element Method (FEM) has been employed for modeling. Eleven specimens, ten of which were strengthened using CFRP sheets, were analyzed under different coverage length, the number of layers, and the location of CFRP composite. ANSYS software was used to analyze the SHS steel beams. The results showed that the coverage length, the number of layers, and the location of CFRP composite are effective in increasing the ultimate load capacity of the continuous SHS steel beams. Application of CFRP composite also caused the ductility increase some strengthened specimens.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.510-512
• /
• 2000

This paper describes the voltage induced at neutral line and the proper location of lightning arrester in combined 22.9 kV class distribution line jointed overhead line and cable each other Modeling is established in ATP Draw to perform simulation. Simulated distribution line at this paper consists of distribution line 4.2km and underground distribution line 2km. Overvoltage and induced voltage are analyzed at several point of combined line. Analysis results was compared to select the best point to install arrester. Such analysis technology will be applied to obtaining capacity and location of arrester in the similar combined distribution line.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1211-1212
• /
• 2008

In this paper, we propose image process modeling as a part of location based surveillance system for unauthorized target recognition and tracking in harbor, airport, military zone. For this, we compress and store background image in lower resolution and perform object extraction and motion tracking by using sobel edge detection and difference picture method between real images and a background image. In addition to, we use Independent Component Analysis Neural Network for moving target recognition. Experiments are performed for object extraction and tracking of moving targets on road by using static camera in 20m height building and it shows the robust results.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1832-1843
• /
• 1995

Tool interference is one of the most critical problems in sculptured surface machining. When machining cavities and concaves, the tool frequently overcuts the portions of the surface, which cause inaccuracy in machining. So tool interference-free paths must be generated for rough cutting more efficiently. In this paper a software using SSI(Surface/Surface intersection) algorithm is developed for eliminating tool interference which occurs in an offset surface in 3-dimensional free form surface modeling. this work consists of two stages : using the offset data, the intersection curves are rapidly checked by this algorithm at the first stage. CL(cutter location) data are obtained by deleting the loop section of intersected offset patches at the second stage. This algorithm can reduce the amount of memory required to store machining data and also easily check region which have the possibility of intersection. Also, This software is verified to be useful in machining a curved object on a DNC milling machine.

• Coupled systems mechanics
• /
• 제5권2호
• /
• pp.157-190
• /
• 2016

This paper deals with frequency analysis of Euler-Bernoulli beams carrying an arbitrary number of Kelvin-Voigt viscoelastic dampers, subjected to harmonic loads. Multiple external/internal dampers occurring at the same position along the beam axis, modeling external damping devices and internal damping due to damage or imperfect connections, are considered. The challenge is to handle simultaneous discontinuities of the response, in particular bending-moment/rotation discontinuities at the location of external/internal rotational dampers, shear-force/deflection discontinuities at the location of external/internal translational dampers. Following a generalized function approach, the paper will show that exact closed-form expressions of the frequency response under point/polynomial loads can readily be derived, for any number of dampers. Also, the exact dynamic stiffness matrix and load vector of the beam will be built in a closed analytical form, to be used in a standard assemblage procedure for exact frequency response analysis of frames.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.304-307
• /
• 2005

A numerical modelling method using a backward-in-time advection dispersion equation is introduced in assessing the vulnerability of groundwater to contaminants as an alternative to classical vulnerability mapping methods. The flux and resident concentration measurements are normalized by the total contaminants mass released to the system to provide the travel time probability density function and the location probability function. With the results one can predict the expected travel time of a contaminant from up stream location to a well and also the relative concentration of the contaminant at a well. More specific groundwater vulnerability can be mapped by these predicted measurements.